FortiAP S322C
Information
FortiAP-S322C -Supplement.indd 1 2015-04-15 2:28:18 PM
Box Includes
Box Includes
FortiAP S322C
Wall Mount Kit
FortiAP-S322C -Supplement.indd 2-3 2015-04-15 2:28:19 PM
Information Supplement
Pole Mount Bracket
Wall Mount Bracket
Pole Mount Kit
Pole Mount Strap
5GHz Antennae (3)
PoE Injector
2.4GHz Antennae (3)
Power Adapter
Installation
IMPORTANT NOTE:
The unit is designed for outdoor use and may be attached to either a
connector is supplied to ensure a watertight seal for connecting the Ethernet cable to the device.
Note: The device can be mounted either outdoors or indoors. The included PoE injector and surge
protector must be mounted indoors, as they are not weatherproof.
The device must be professionally installed.
pole or wall. A waterproof
To mount the device on a wall
1. Using the wall-mount base as a template, mark the location of the mounting bolt holes on a flat
wall surface.
Drill the mounting holes in the marked locations.
2.
3. Fasten the wall-mount base securely to the back of the unit using the provided mounting
screws.
FortiAP-S322C -Supplement.indd 4-5 2015-04-15 2:28:19 PM
FAP-S322C
To mount the FortiAP unit on a pole
1. Fasten the wall-mount base securely to the back of the unit using the provided mounting screws.
2. Attach the
The pole-mount bracket can be attached either vertically or horizontally, as required.
3. Loop the provided pole strap through the slots on the pole-mount bracket and then around
the pole.
4. Tighten the
FortiAP-S322C -Supplement.indd 6-7 2015-04-15 2:28:19 PM
pole-mount bracket to the wall-mount base using with the provided screws.
strap with an appropriate screw driver and ensure that the device is firmly in place.
Loading...