Fortinet 121203 User Manual

FortiAP 24D

QuickStart Guide

December 02, 2014

20-521-254742-20141202

Copyright© 2014 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®,
FortiCare® and FortiGuard®, and certain other marks are registered
trademarks of Fortinet, Inc., and other Fortinet names herein may also be
registered and/or common law trademarks of Fortinet. All other product
or company names may be trademarks of their respective owners.
Performance and other metrics contained herein were attained in internal
lab tests under ideal conditions, and actual performance and other results
may vary. Network variables, different network environments and other
conditions may affect performance results. Nothing herein represents any
binding commitment by Fortinet, and Fortinet disclaims all warranties,
whether express or implied, except to the extent Fortinet enters a binding
written contract, signed by Fortinet’s General Counsel, with a purchaser
that expressly warrants that the identified product will perform according
to certain expressly-identified performance metrics and, in such event,
only the specific performance metrics expressly identified in such binding
written contract shall be binding on Fortinet. For absolute clarity, any
such warranty will be limited to performance in the same ideal conditions
as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants,
representations,and guarantees pursuant hereto, whether express or
implied. Fortinet reserves the right to change, modify, transfer, or otherwise
revise this publication without notice, and the most current version of the
publication shall be applicable.

Register for Support

Register your Fortinet product to receive:

• Technical Support

• New product features

• Protection from new threats

Vous devez enregistrer le produit pour recevoir:

• Support technique

• Nouvelles fonctionnalitées du produit

• Protection contre de nouvelles menaces

La reistrazione ti permette di usufruire di:

• Supporto Tecnico

• Nuove funzionalita

• Proteezione dalle ultime minaccce

Debe registrar el producto para recibir:

• Apoyo técnico

• Nuevas funcionalidades del producto

• Protección contra ataques

登録のお願い

本日、フォーティネット製品の登録をしてください。
登録すると次のメリットがあります。
テクニカルサポート • 新機能の追加 • 新しい脅威への防御

请马上注册

您的飞塔产品
您在注册以后才能得到技术支持、新产品特点信息、最新威胁防护

QuickStart Guide

https://support.fortinet.com

Toll free: 1 866 648 4638
Phone: [phone]
Fax: [phone]
Email: [e-mail]

Box Includes

FortiAP 24D

FortiAP 24D

QuickStart Guide

QuickStart Guide

Ethernet Cable

Wall Mount Kit

4

Before You Begin

Write down details that you may need from your network administrator or ISP.

DSL PPPoE

Username Password

Cable Modem DHCP

It is normal to not require a hostname, but your ISP may require it.

Hostname

Static IP address

IP Address Subnet Mask

Default Gateway Primary/Secondary DNS

5

6

1

Mounting

Anchor

M3x16L Screw

1. Select an appropriate location and mark the location on the wall where the anchors
will be located.

2. Insert the anchors provided in the wall mount kit into the wall in the marked locations.
If necessary, drill holes into the wall with an appropriately sized drill bit prior to inserting
the anchors.

3. Screw the provided M3x16L screws into the two anchors, leaving enough of the
screws exposed to ensure that the unit can be mounted on them.

4. Mount the FortiAP unit onto the screws and ensure that it is mounted securily.
You can now proceed with connecting your FortiAP unit.

7

2

Basic Connections

Internet

WAN Port

Optional Power

Connection

Connect your FortiAP device to a FortiGate controller or an Internet connection.

If you are using Power over Ethernet (PoE), ensure that the cable is connected to an
applicable port on your FortiGate device or PoE injector.

Optionally, connect your device to a power outlet using the optional power adapter.

Caution: Adequate grounding must be provided to the FortiAP unit and the PoE

injector, in compliance with your local electrical code or regulations.

Warning: This device complies with IEEE 802.3af PoE specification. Do not use any

PoE injectors that are not IEEE 802.3af compliant as they may damage your device.

8