Formax FD 280-10 User Manual

FD 280-10
Heavy Duty Feeder for FD 280 Tabbing System

Operator Manual

8/2011 First Edition

TABLE OF CONTENTS

1. INTRODUCTION ......................................................................................................... 1

1.1 Feeder Description .................................................................................................... 1

1.2 Items Included ........................................................................................................... 1

1.3 Operating Manual Safety Terms ................................................................................ 1

1.4 Safety Precautions .................................................................................................... 2

2. SPECIFICATIONS & REQUIREMENTS ..................................................................... 3

2.1 Specifications ............................................................................................................ 3

2.2 Operating Requirements ........................................................................................... 3

3. POWER CONNECTION .............................................................................................. 4

3.1 Safety ........................................................................................................................ 4

3.2 Line Voltage ................................ ................................................................ .............. 4

3.3 Power Cord ................................................................ ............................................... 4

4. SET-UP ....................................................................................................................... 5

4.1 Feeder Assembly ...................................................................................................... 5

5. OPERATION ............................................................................................................... 6

5.1 Feeding Product ................................................................................................ ........ 6

5.2 Advanced Feedng Techniques .................................................................................. 8

6. TROUBLESHOOTING .............................................................................................. 10

6.1 Troubleshooting Chart ............................................................................................. 10

7. MAINTENANCE & SERVICE .................................................................................... 11

7.1 Cleaning .................................................................................................................. 11

7.2 Service .................................................................................................................... 11

1. INTRODUCTION

1.1 Feeder
Description

1.2 Items Included

The FD 280-10 Feeder is designed to be used with a
variety of printing and forms processing devices. It is most
commonly used with tabbing and printing machines. The
FD 280-10 feeds a wide variety of materials, and can be
controlled by the processing device, creating a truly
integrated system.

FD 280-10 Feeder
Power Cord
Output Wheel assembly
Tail Support Bar
Interconnect Cable
(4) Risers / Feet
Paper Stop assembly
(3) Output Bridges
(6) sets of magnetic Output Guides
Hardware
Operating Manual

1.3 Operating
Manual Safety
Terms

The following highlighted blocks are used throughout this
manual to emphasize important information. Pay careful

attention to this information.

WARNING

ALERTS YOU TO ACTIONS OR CONDITIONS
WHICH MAY PRESENT HAZARDS OR CAUSE
INJURY TO PERSONNEL.