Ford VCM II Quick Start Guide
I
Trade
Ford
Copy
IDS V
Copyr
The in
the tim
e the comput
tions: First tim
is a registere
Use the VCM
ect to the VC
g the supplie
Content
ts
ny time witho
de
Required
Required
Optional:
Prepar
Configu
Instruct
Optional
Accessory:
IDS to conn
ts
tion ------------e first time --CM II wireless
-----------------d D-Link wire
the VCM II (D
stomer Flight
or Company
ons in this ma
eserves the r
-----------------
----------------sly (if equipp
-----------------
nual are base
ight to make
-----------------
-----------------
ped) -----------
----------------(If equipped)
to Point) ------
CFR) ----------
ed on the late
changes at a
-----------------
-----------------
-----------------
-----------------
) ----------------
-----------------
-----------------
--------- 1
--------- 1
--------- 2
--------- 2
--------- 2
--------- 2
--------- 3
n available at
out notice.
t
IDS VCM II Quick Start Guide
NOTE: Installing and configuring IDS requires Windows Administrative privileges.
To run your computer with Windows Administrative privileges go to Windows Start, then select Help and Support
and type “Change a user’s group or account type” in the Search box.
See
http://www.fordtechservice.dealerconnection.com/vdirsnet/applicationservices/file/download/110/IDSUserManual_ENG.pdf for
more detailed instructions
Required: IDS Software Download & Installation
NOTE: An active IDS License is required on your computer to use the VCM II.
Ford Dealers
http://www.fordtechservice.dealerconnection.com/vdirs/wds/diagnosticsites/vcmdvd/idssoftware.asp and download the
latest IDS Software
All Others
http://www.motorcraftservice.com/vdirs/wds/diagnosticsites/vcmdvd/mcs/idssoftware.asp and download the latest
IDS Software
See the
for additional help with IDS Software Download & Installation
See
IDS Software Licensing
Required: Configuring IDS and VCM II for the first time
http://www.fordtechservice.dealerconnection.com/vdirsnet/applicationservices/file/download/140/IDS_Webdownload.PDF
http://www.fordtechservice.dealerconnection.com/vdirs/wds/diagnosticsites/isl/usen/facts.asp for additional help with
NOTE: Before beginning this procedure ensure that your computer 's antivirus software and firewall
have been disabled.
1. Disconnect any VCM I and VCM II devices from the computer.
2. Start the IDS software.
3. Connect the VCM II to the computer using a USB cable (
not required.
4. The “Device Selection” tab will automatically appear at the top right corner of the screen after
approximately 30 seconds. When this tab appears the installation was completed successfully. If the
Device Selection tab is already present on your computer continue to the next step.
5. The VCM II software may require an update which typically takes about 10 minutes. Please follow the
on-screen instructions.
6. The VCM II is now ready to start a vehicle session.
Figure 1). A vehicle connection is
V1.0 Page 1 of 4 21-MAR-2012
Loading...