(See model number congurator on page 2 for details.)
Order parts online
www.follettice.com
Installation Instructions for Vision
self-contained
™
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
01062561R00
Chewblet® Ice Machine Model Number Configurations
AVSC425MC
ConfigurationApplication
S RIDE
T Top-mount
®
(RIDE remote ice
delivery equipment)
MC Maestro
Plus™
Chewblet
(400 Series)
C 208-230/60/1 (icemaking head)
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote.
If remote unit, high side is208-230/60/1.
E 230/50/1 (icemaking head)
Self-contained only.
F 115/60/1 (icemaking head)
Remote only. High side is
208-230/60/3.
425 up to
454 lbs
(206kg)
CondenserSeriesVoltageMachine
A Air-cooled, self-contained
W Water-cooled,
self-contained
R Air-cooled, remote
condensing unit
N Air-cooled, no condensing
unit for connection to
parallel rack system
V Vision™
H Harmony™
B Ice storage
bin
CAUTION!
• This appliance should be permanently connected by a qualied person in accordance with application codes.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
• Connect to potable water supply only.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory,
or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children should be
supervised to ensure that they do not play with the appliance.
• This appliance is intended to be used for household and similar applications such as staff kitchen areas in
shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential
type environments; bed and breakfast type environments; catering and similar non-retail applications.
• WARNING! To avoid a hazard due to instability of the appliance, it must be xed in accordance with the
instructions.
Site Preparation ............................................................................................................................................................... 5
Installation site requirements ...................................................................................................................................... 5
Install bin signal .......................................................................................................................................................... 6
Install transport tube ................................................................................................................................................... 7
Mount Ice Machine .......................................................................................................................................................... 8
Ice machine in cabinet ................................................................................................................................................9
Air-cooled ice machines only .................................................................................................................................... 11
Water-cooled ice machines only ............................................................................................................................... 11
Bin Stat Cable ........................................................................................................................................................... 11
Transport tube installation ........................................................................................................................................... 12
General requirements ............................................................................................................................................... 12
RIDE model ice machine start up procedure ............................................................................................................. 13
Before turning on power ...........................................................................................................................................13
After turning on power ..............................................................................................................................................13
Vision • RIDE Technology Maestro Plus
3
1. Unpack
Carefully unpack and inspect the contents of your Follett ice machine.
1.1 Unpack Ice Machine
4
Maestro Plus Vision • RIDE Technology
2. Site Preparation
Provide drainage, potable water supply and electrical power to within 6 feet (2m) of
ice machine in accordance with local and national codes. Outdoor installation is not
recommended and will void warranty.
2.1 Installation site requirements
NEMA
➊
➋
➌
➍
5-15
➍
Electrical ➊
1/4"
1'
WARNING!
§ This appliance should be permanently connected by a qualied person in accordance with application codes.
§ If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
MCD425(A/W)VS* 115/60/1 (115 V ±10%), 15A breaker
* Requires a 15A dedicated circuit.
Potable Water Supply ➋
10 psi to 70 psi (69 kpa to 483kpa)45 F to 90 F (7 C to 32 C)