Follett 25HR425A-S0-00 User Manual

25 & 50 HR series wall mount with RIDE® model Chewblet® ice machine

Ice and water dispensers, 115V/60 Hz

Ice
storage
capacity Dispense

25 lb
(11.4 kg)

50 lb
(22.7 kg)

* Units configured with drain pan

Ice production

Temperatures
air/water

Air-cooled 425 lb (193.0 kg) 325 lb (147.6 kg)

Water-cooled 486 lb (220.6 kg) 408 lb (185.2 kg)

Energy
consumption
per 100 lb
(45.4 kg) ice

Condenser
water
consumption

Water
consumption

SensorSAFE

SensorSAFE

70/50 F (21/10 C) 90/70 F (32/21 C)

N/A 6.3 kWh air-cooled

N/A 0.5 gpm (1.9 Lpm) at

12.0 gal (45.4 L) of potable water per 100 lb
(45.4 kg) of ice

Ice
machine
cooling Item number

air

water

air

water

25HR425A-S0-00
25HR425A-S0-DP*
25HR425W-S0-00
25HR425W-S0-DP*
50HR425A-S0-00
50HR425A-S0-DP*
50HR425W-S0-00
50HR425W-S0-DP*

4.3 kWh water-cooled

70 F (21 C) water

™

Symphony Plus

ice and water dispenser

Features

25 or 50 lb (11.4 or 22.7 kg) ice storage capacity
Maestro Plus™ Chewblet ice machine with up to 425lb(193.0kg)

dailyproduction of popular Chewblet ice

- automatically transport ice through a tube with RIDE
technology from up to 20' (6.1 m) away

- soft, chewable, compressed nugget ice is preferred over cubes1
and is ideal for patient care

- Quiet Night™ sleep mode turns o ice machine when idle

Designed with sanitation in mind

- automatic self-flushing of ice machine removes impurities

- drain cup provides internal air gap for added protection of
food zone components from drain linecontaminants

- Agion® silver-based antimicrobial provides protection of key ice
and water contact components

2

- SensorSAFE™ infrared ice dispense

Reliable design, easy to service and clean

- cleaning and sanitizing of entire machine takes only1 hour

- LED control board provides at-a-glance machine status

- panels are easily removed for accessibility to all components

- ice machine parts are common across all
Symphony Plus dispensers

- stainless steel evaporator and auger deliver long life

Environmentally responsible

- meets Consortium for Energy Eciency Tier 2 specifications

- R404a refrigerant has zero ozonedepletion potential

- continuous ice making process uses less electricity and water

Durable, attractive dispenser

- frame and exterior cabinet are stainless steel with accent trim

- poly drain pan, grille and dispenser lid are corrosion-resistant

- secured top lid

Easy installation and industry’s best warranty

- comes in two boxes – ice machine and dispenser

- warranty – 3 years parts and labor, 5 years compressorparts

Accessories

Chilled water option (item# 01065168)
Pressurized water sanitizing kits (refer to form# 6830)
SafeCLEAN

(item# 00132001)
Nu-Calgon® IMS-II sanitizer, 16 oz bottle (item# 00979674)
Additional filters (refer to form#6380, 9905, 6070)
Additional Symphony Plus accessories (refer to price list)

™

environmentally responsible ice machine cleaner

Job
Item

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Specification

10.62" (26.97 cm)

Ice storage capacity 25 Series – 25 lb (11.4 kg),

50 Series – 50 lb (22.7 kg)

W1 Width, dispenser 21.00" (53.3 cm)
D1 Depth, dispenser 24.50" (62.2 cm)
D2 Depth of drain pan 7.00" (17.78 cm)
H1 Height, with drain pan 25 Series – 29.63" (75.3 cm),

50 Series – 33.63" (85.4 cm)

H2 Height, without drain pan 25 Series – 26.00" (66.0 cm),

50 Series – 30.00" (76.2 cm)

H3 Dispense height clearance 7.73" (19.63 cm)
Utility connection location back or bottom
C1 115 V/60/1

dispenser electrical

C2 Potable water inlet, dispenser 3/8" FPT internal connection–

C3 Drain, dispenser 3/4" MPT

Service clearance 12.00" (30.5 cm) top of ice machine

W2 Width, ice machine 18.88" (48.0 cm)

D3 Depth, ice machine 20.75" (52.7 cm) (air-cooled

H4 Height, ice machine 17.25" (43.8 cm)

Ventilation clearance air-cooled models only – 6.00" (15.24cm)

C4115 V/60/1
ice machine electrical

C5 Potable water inlet, ice machine
and dispenser

C6 Drain, ice machine 3/4" MPT
C7 Ice transport tube see form# 6695 for details

Water-cooled ice machine
connections

C8 Condenser inlet
C9 Condenser drain

Air temperature 50 -100 F (10 - 38 C) indoor use only
Water temperature 45 - 90 F (7 - 32 C)
Potable water pressure 10 - 70 psi (69 - 483 kpa)
Condenser water pressure 10 - 125 psi (69-861 kpa)
Heat rejection air-cooled models – 5000 BTU/hr,

Water flow requirement for
water-cooled models

Approximate ship weight 310 lb (141 kg) (two boxes)
NOTE: For indoor use only
SHORT FORM SPECIFICATION:

load in wall mount configuration, with ___ 25 lb (11.4 kg) or ___ 50lb (22.7 kg) of
storage. Environmentally responsible R404a ice machine (choose one) ___ air- or
___ water-cooled. Dispenser frame and cabinet stainless steel with plastic trim.
Ice machine to produce approximately 425lb(193.0 kg) of Chewblet compressed
nugget ice at air temp. of 70 F (21 C), water temp. of 50 F (10 C). Ice machine
equipped with automatic self-flushing and Quiet Night sleep mode. Dispensers
with RIDE ice machines equipped with 10'(3 m) of insulated ice transport tube,

2.00"(5.08 cm) air duct for ice machine (air-cooled only). Storage area insulated
with non-CFC, high density, foamed-in-place polyurethane. 7'(2.1m) cord and
NEMA 5-15 90º hospital-grade plug provided. NSF and ETLlisted.

25/50 HR series wall mount

Form #6645 10/15
© Follett Corporation

4amps

1.50"(3.81 cm) knockout provided

and dispenser

undercounter installations –
add1.50 (3.81cm) for shroud)

right side of icemachine
11 amps, 0.8 kW

7' (2.1 m) cord, NEMA 5-15 90º
hospital-grade plug

3/8" FPT

3/8" FPT
3/8" FPT

water-cooled models – 1400 BTU/hr
to air, 3600 BTU/hr to water

0.25 gpm at 50 F

0.5 gpm at 70 F

1.25 gpm at 90 F

Ice and water dispenser to be Follett® automatic

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Dimensional drawing

D1

H2

H1

C7

5.81"

(14.75 cm)

8.75" (22.23 cm)

10.50" (26.7 cm)

14.72" (37.4 cm)

Front view — air-cooled models

W2

H3

C6

2.50" (6.35 cm)

Front view — water-cooled models

H3

See dispenser detail sheet, form# 6675, for counter cut outs.
See form# 6695 for complete ice machine specifications.

1 Independent third party studies. Contact Follett for details.
2 Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.
Agion is a registered trademark of Sciessent LLC.
Calgon is a licensed tradename distributed by Nu-Calgon, in the United States.
Maestro Plus, Symphony Plus, SensorSAFE, SafeCLEAN and Quiet Night are trademarks of FollettCorporation.
Chewblet, RIDE and Follett are registered trademarks of Follett Corporation, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may
vary depending on country of origin.

W2

C8 C9

C6

W1

D2

W2

access panel

C2

C3

C5

2.25" (5.72 cm)

C5

(5.72 cm)

2.50" (6.35 cm)

8.25" (20.96 cm)

H3

D3

H4

C1

0.80"

(2.03 cm)

C4

4.75" (12.07 cm)

C4

2.25"

4.75"

(12.07 cm)

5.25"

(13.34 cm)