Fluke Ti20 Operating Manual

Manual Title: Ti20 Users Supplement Issue: 3
Print Date: January 2006 Issue Date: 9/06
Revision/Date: Page Count: 1

This supplement contains information necessary to ensure the accuracy of the
above manual. This manual is distributed as an electronic manual on the
following CD-ROM:

Manual Supplement

CD Title: Ti20 Thermal Imager
CD Rev. & Date: 1, 2/2006
CD PN: 2492146

© 2006 Fluke Corporation. All rights reserved. Printed in U.S.A. x

Ti20 Users Manual Supplement

Change #1

On page 1-11, change Figure 1-7 as shown below:

1

Note that this change also applies to the Quick Reference Guide.

Change #2

On page 2-9, under Adjusting the Span, replace the first sentence with the following:

The full temperature range of the Imager is -10 °C to 350 °C (14 °F to 662 °F).

Under step 4, replace the last sentence with the following:

The minimum temperature span is 10 °C.

On page D-1, change the entries for Detector Type, Instantaneous Field of View, Reflected
Background Temperature and Relative Humidity to:

Detector Type………………………….128 x 96 thermal element focal plane array (FPA)
Instantaneous Field of View……………2.7 mrad
Reflected Background Temperature……-50 to 460 °C (-58 to 860 °F)

Relative Humidity………………………10 to 95% noncondensing

On page D-2, under Vibration change the following:

From: MIL-PRF-28800, paragraph 4.5.5.3.1, Class 2
To: MIL-PRF-28800, Class 2

9/06 1