Fluke FoodPro Plus Specifications

Click on www.comarkUSA.com for more information

Comark is the leading manufacturer and supplier of a wide range of electronic measurement instruments for temperature, humidity, pressure and pH.

FoodPro Range

Infrared Food Safety Thermometers

The Comark FoodPro thermometer series
provides advanced temperature measurement
solutions for the food service industry.

Food service professionals understand the need for
complete, accurate and fast temperature monitoring from the
point of receiving through to holding and serving. Monitoring
temperature is essential to keeping food safe and is required
by regulatory bodies. Regular monitoring of temperatures
and adherence to food safety guidelines makes for a better
business – increasing food safety and reducing liability and
food waste. The combination of both FoodPro thermometers
provides a complete temperature measurement and
monitoring solution for food service professionals.

• Scan Quickly scan temperatures
without risk of cross-contamination

• Probe Verify internal temperatures with
flip down probe thermometer (FoodPro Plus only)

• Timer Set adjustable alarms for line check reminders

(FoodPro Plus only)

• HACCP Check Indication lights instantly warn of potentially
unsafe temperatures

• Hand Washable Sealed to IP54 standards for long life expectancy
and accuracy

• Spot Illumination Target infrared measurements highlighted by LED

• Scale °F/°C switchable

• Extended Life Two year warranty standard for normal use

FoodPro – Fast, initial infrared temperature checks
with illumination light to show temperature measurement
spot, removing the targeting guesswork.

FoodPro Plus – Infrared checks supported by core
temperature measurement using flip down probe.
The integrated count-down timer can be used to
monitor line checks and cooking and cooling
intervals. Supplied with a carrying pouch.

Food safety

temperature solutions

A: FoodPro Plus infrared thermometer with probe and countdown timer B: FoodPro infrared thermometer

AB

Click on www.comarkUSA.com for more information

Comark Instruments

PO Box 9090,
Everett, WA 98206, USA.

Tel: [phone] Fax: [phone]
Email: [e-mail]

Comark Limited

Gunnels Wood Road, Stevenage,
Hertfordshire SG1 2TA England

Tel: 01438 ([phone]
Fax: 01438 ([phone]

Email: [e-mail] – UK and Ireland

[e-mail] – International

TECHNICAL SPECIFICATIONS

C161/3/US

© Comark Limited J42067/07/007

FP Infrared thermometer

FPP Infrared thermometer with probe and countdown timer

ORDER CODES

WARRANTY

All Comark Instruments have a minimum one-year warranty unless otherwise stated.
The warranty period for temperature probes is six months and all other probes and
electrodes are unwarranted because the conditions of use are beyond our control.

The Comark warranty covers manufacturing defects and component failures on all
products returned to Comark premises and applies worldwide. The warranty does not
affect your statutory rights.

In line with our policy of continuous development we reserve the right to alter any product
specifications without notice.

All products are covered by our Quality Management System which is compliant with
BS EN ISO 9001:2000 for the design, manufacture, supply, service, repair and
recalibration of electronic measuring instruments and equipment.

Comark has an accredited UKAS calibration laboratory for temperature and humidity
measurement and can offer full service and recalibration facilities.

Working Range 0.5"to 12"(12mm to 300mm)

Minimum Target Size 0.5"/12mm

Distance to Spot Ratio 2.5 to 1

Target Illumination High Brightness LED

Preset Emissivity at Operating Temperature of +73°F/+23°C

For targets below +32°F/0°C 1.0
For targets above +73°F/+23°C 0.97

Spectral Response 8 to 14 microns

Measurement Range

FoodPro infrared –20°F to +400°F/–30°C to +200°C
FoodPro Plus infrared –30°F to +525°F/–35°C to +275°C
Probe –40°F to +392°F/–40°C to +200°C

Infrared Accuracy

For targets between +32°F
and +150°F/0°C and +65°C ±2°F/1°C
For targets below +32°F/0°C ±2°F/1°C, ±0.1 degree/degree
For targets above +150°F/+65°C ±1.5% of reading

Countdown Timer FoodPro Plus 10 seconds to 7 hours 59 minutes

Environmental Protection IP54

Ambient Operating Range

Temperature +32°F to +122°F/0°C to +50°C
Humidity at +86°F/+30°C 90% (±5%) RH noncondensing

Battery

FoodPro 1 x AA alkaline
FoodPro Plus 1 x 9V alkaline

Battery Life 10 hours at +73°F/+23°C

Weight with Battery 150g/0.33lbs

Dimensions FP FPP

Length 5.88

"/

150mm 6.5"/165mm

Width 1.25

"/

30mm 1.25"/32mm

Depth 2

"/

50mm 2"/50mm

Sensor Type Class A Platinum thin film RTD

Accuracy +23°F to +150°F/–5°C to +65°C ±1°F/0.5°C

Speed of Response Under 8 seconds to 95% response

Length 3.2"/78mm

Diameter 0.118

"/

3mm

FoodPro and FoodPro Plus

FoodPro Plus Penetration Probe

Distributed by:

The FoodPro Plus has an integral
penetration probe which can be unfolded
to verify potentially unsafe readings and
provide accurate core temperature checks.

FoodPro Range

Infrared Food Safety Thermometers

CERTIFICATE No FM12129

ISO9001

0451