Fluke 87V Brochure

80 Series V Industrial

E

l

e

c

t

r

i

c

a

l

S

a

f

e

t

y

1000 V CAT III
600 V CAT IV

N10140

True-RMS Multimeter

with Temperature

Accuracy and diagnostic functions for
maximum industrial productivity

The new Fluke 87V has improved measurement functions, trouble­shooting features, resolution and accuracy to solve more problems
on motor drives, in plant automation, power distribution, and electro­mechanical equipment. The 87V operates very similar to the classic
87, but with more problem-solving power, safety, convenience and
impact protection.

Features for maximum productivity

Unique function for accurate voltage and frequency measurements

•

on adjustable speed motor drives and other electrically noisy
equipment (87V)

Built-in thermometer conveniently allows you to take temperature

•

readings without having to carry a separate instrument (87V)

Large digit display with bright, two-level backlight makes the

•

80 Series V significantly easier to read than older models

NEW! 87V/E2 Industrial Electrician Combo Kit makes troubleshooting
more productive with standard meter hanging accessory for hands­free operation, soft case for protection and storage, 1.5 m
heat resistant silicone test leads and more.

Electrical safety

All inputs are protected to Category III, 1000 V and Category IV
600 V. They can withstand impulses in excess of 8,000 V and
reduce risks related to surges and spikes.

Specifications

Function Range and resolution Basic accuracy

83V 87V

DC Volts 600.0 mV, 6.000 V, 60.00 V,

600.0 V, 1000 V

AC Volts 600.0 mV, 6.000 V, 60.00 V, 0.5 % 0.7 %

600.0 V, 1000 V (True-rms)

DC Current 600.0 µA, 6000 µA, 60.00 mA,

600.O mA, 6.000 A, 10.00 A

AC Current 600.0 µA, 6000 µA, 60.00 mA, 1.2 % 1.0 %

600.O mA, 6.000 A, 10.00 A (True-rms)

Temperature -200 to 1090 °C (-328 to 1994 °F) — 1.0 %
(excl. probe)

80BK Temperature -40 to 260 °C (-40 to 500 °F) — 2.2 °C
Probe or 2 %

Resistance 600.0

600.0 kW, 6.000 MW, 50.00 MW

Capacitance 10.00 nF, 100.0 nF, 1.000 µF,

10.00 µF, 100.0 µF, 9,999 µF

Frequency 199.99 Hz, 1.9999 kHz,

19.999 kHz, 199.99 kHz

W, 6.000 kW, 60.00 kW,

0.1 % 0.05 %

0.4 % 0.2 %

0.4 % 0.2 %

1.0 % 1.0 %

0.005 % 0.005 %

Comparison chart

Feature 83V 87V

True-rms ac voltage and current for accurate measurements on
non linear signals

Selectable filter for accurate voltage and frequency measurements
on motor drives

0.05 % dc accuracy

4-1/2 digit mode for precise measurements

Built-in thermometer lets you carry one less tool

Large display digits and two-level bright white backlight for
increased visibility

10,000 µF capacitance range for components and motor caps

Peak capture to record transients as fast as 250 µs

Measure up to 1000 V ac and dc

Measure up to 10 A, 20 A for up to 30 seconds

Auto and manual ranging for maximum flexibility

Analog bargraph

Resistance, continuity and diode test

Frequency to 200 kHz and % duty cycle

Min/Max and average recording to capture variations automatically

Relative mode to remove test lead resistance from low
ohms measurements

Improved sleep mode for long battery life

Access door for fast battery changes without breaking the
calibration seal

Limited lifetime warranty

Removable holster with built in test lead and probe storage

Cat IV 600 V and Cat III 1000 V electrical safety ratings

Basic test leads and alligator clips

Bead type thermocouple temperature probe

Included accessories

Every Fluke 80 Series V meter comes packaged
with TL75 Test Leads, AC72 Alligator Clips,
holster, 9 V battery (installed), temperature
probe (87V only) CD-ROM (user’s manual and
technical notes) and operator’s guide.

Ordering information

Fluke-83-5 Industrial Multimeter
Fluke-87-5 Industrial True-rms
Multimeter with
Temperature
Fluke-87-5/E2 Industrial Electrician
Combo Kit

A

B

C

E

D

G

Fluke 87V/E2 Industrial Electrician
Combo Kit

Includes special accessories to make indus­trial troubleshooting even more productive.
Save more than $50* compared with the
individual purchase price.

A. 87V Industrial Multimeter

New! Lightweight soft case for optimal

B.

protection and accessory storage
C. 1.5 m heat resistant silicone test leads
D. Removable test probes with 4 mm of

exposed metal for use on industrial

circuits
E. Retractable long reach alligator clips
F. Magnetic hanger to position and hold

meter to steel surfaces
G. Temperature probe

*Savings are noted in US$

Fluke. Keeping your world
up and running.™

Fluke Corporation
PO Box 9090, Everett, WA USA 98206

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2006 Fluke Corporation. All rights reserved.
Printed in U.S.A. 6/2006 2137623 D-EN-N Rev B

F