Fluke 80K-15 User Manual

80K-15 Electronic

Air Cleaner Test Probe

Reliably measure electronic air cleaner
output voltages

The Fluke 80K-15 Electronic Air Cleaner
Test Probe is an accessory which
extends the voltage measurement capa­bility of most digital multimeters up to
15 kV for use in low energy environ­ments such as measuring the output
voltage in electronic air cleaners.

Special plastic body construction
provides the user with isolation and
protection from the voltage being
measured. A heavy-duty grounding clip
provides a secure connection to earth
ground.

The 80K-15 probe provides high
accuracy (±2%) when used with a
voltmeter having an input impedance of
10Ω. With the probe’s 1000:1 division
ratio, a standard digital multimeter will
read 1V for every 1000V measured at
the probe tip.

Ordering Information

Fluke 80K-15 Electronic Air Cleaner
Test Probe

Need technical assistance? Call:

1-800-44-FLUKE

Toll-free in the U.S.
[phone] in Canada

[phone] other countries

Specifications

Voltage range: 1 kV to 15 kV dc or
peak ac, 10 kV rms ac

Input resistance: 1000 MΩ
Division ratio: 1000:1
Accuracy: DC: ±2%, AC: ±5% at 60 Hz
Multimeter input: Use a multimeter with

10 MΩ input impedance in the volts
mode for best accuracy.

Fluke. Keeping your world

up and running.

For more information to be sent to
you by fax, call 1-800-FLUKE-FAX
in the U.S. and Canada. Or, visit our
Website at http://www.fluke.com

C0184UEN 5/98 Rev A