Optional Accessory: Fluke 80i-2010s AC/DC Current Clamp
Product Feature
The Fluke 80i-2010s AC/DC Current Clamp is a clamp-on current probe with 2000A range and 0.8 % accuracy.
General Specifications
Modules |
80i-2010s |
Dimensions |
110 mm x 270 mm x 46mm |
Weight |
0.710 kg (1.6 lbs), including battery |
Output Cable |
1.5 m (60 in) Shielded Coaxial cable with BNC plug |
Maximum Conductor Size |
52.0 mm (2.05 in) |
Maximum Jaw Opening |
81.5 mm |
Output to Zero |
Auto adjustment with Zero button |
Temperature Operating |
-10 °C to 50 °C (14 °F to 122 °F) |
Storage (battery removed) |
-30 °C to +60 °C (-22 °F to +140 °F) |
Operating Humidity |
≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C) |
Altitude Operating |
2,000 m (6560 ft) |
Storage |
12,000 m (40,000 ft) |
Demagnetize Clamp |
Open and close the Clamp jaws several times with soft click, use of the clamp on |
|
uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less. |
Safety |
IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V |
Ingress Protection |
IEC 60529, IP40 |
Power Supply Type |
2 x AA alkaline battery, IEC LR6 |
Battery Life |
150 hours (typically) |
Low battery indicator |
Yes |
|
|
6 Fluke Corporation |
Fluke Norma 6000 Series Portable Power Analyzers |