Fluke 7526A Getting Started Guide

7526A
Precision Process Calibrator

Getting Started

PN 4218030 July 2012 © 2012 Fluke Corporation. All rights reserved. Printed in USA. Specifications are subject to change without notice. All product names are trademarks of their respective companies.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
Fluke Corporation P.O. Box 9090 Everett, WA 98206-9090 U.S.A.
Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands
11/99

Table of Contents

Title Page
Introduction ........................................................................................................ 1
Contact Fluke Calibration .................................................................................. 1
Safety Information ............................................................................................. 2
Unpack the Product ............................................................................................ 3
Standard Equipment ........................................................................................... 4
Options and Accessories .................................................................................... 4
Product Description ........................................................................................... 5
Front Panel Overview .................................................................................... 5
Primary Input/Output Terminals ................................................................... 6
Primary Input/Output Display and Controls .................................................. 7
Isolated Input Display, Controls, and Terminals ........................................... 10
Rear Panel ...................................................................................................... 11
Display Layouts ............................................................................................. 12
Error Messages .............................................................................................. 15
Getting Started ................................................................................................... 15
Specifications ..................................................................................................... 16
General Specifications ................................................................................... 16
DC Voltage Specifications, Output ............................................................... 17
DC Voltage Specifications, Isolated Input .................................................... 17
DC Current Specifications, Output ................................................................ 17
DC Current Specifications, Isolated Input ..................................................... 17
Resistance Specifications, Output ................................................................. 18
Resistance Specifications, Input .................................................................... 18
Thermocouple Specification, Output and Input ............................................ 19
RTD and Thermistor Specification, Output .................................................. 20
RTD and Thermistor Specification, Input ..................................................... 21
Pressure Measurement Specifications ........................................................... 22
Switch Test Specifications, Isolated Input .................................................... 22
i
7526A
Getting Started
ii

List of Tables

Table Title Page
1. Symbols .................................................................................................................. 3
2. Error Messages ....................................................................................................... 15
3. Line Voltage Settings ............................................................................................. 15
iii
7526A
Getting Started
iv

List of Figures

Figure Title Page
1. Front Panel ............................................................................................................. 5
2. Primary Input/Output Terminals ............................................................................ 6
3. Primary Input/Output Display and Controls .......................................................... 7
4. Isolated Input Display, Controls, and Terminals .................................................... 10
5. Rear Panel .............................................................................................................. 11
6. Primary Voltage and Current Display .................................................................... 12
7. Primary Thermocouple and RTD Display ............................................................. 13
8. Primary and Isolated Pressure Display ................................................................... 14
9. Isolated Voltage and Current Display .................................................................... 14
v
7526A
Getting Started
vi

Introduction

The Fluke 7526A Precision Process Calibrator (the “Product” or “Calibrator”) is an accurate, full-featured temperature, pressure, and DC calibrator. The Calibrator is meant for research and development, manufacturing, and calibration lab procedures. The Product operation is easy and you will quickly understand its operations and features.
Some time-saving features let you:
Save, recall, and automatically move through setpoints for each output range
Record user-defined RTD curves
Remotely interface with the Product For complete use instructions, see the Users Manual found on the product CD-ROM.

Contact Fluke Calibration

To contact Fluke Calibration, call one of the subsequent telephone numbers:
Technical Support USA: 1-877-355-3225
Calibration/Repair USA: 1-877-355-3225
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31-40-2675-200
Japan: +81-3-6714-3114
Singapore: +65-6799-5566
China: +86-400-810-3435
Brazil: +55-11-3759-7600
Anywhere in the world: +1-425-446-6110 To see product information and download the latest manual supplements, visit Fluke
Calibration’s website at www.flukecal.com. To register your product, visit http://flukecal.com/register-product.
1
Loading...
+ 21 hidden pages