Fluke 729 Specifications

TECHNICAL DATA

Fluke 729 Automatic
Pressure Calibrator

Portable automatic pressure calibrator simplifies
pressure calibration

The Fluke 729 Automatic Pressure Calibrator has been designed
specifically with process technicians in mind to simplify the pres­sure calibration process and provide faster, more accurate test
results. Technicians know that calibrating pressure can be a time­consuming task, but the 729 makes it easier than ever with an
internal electric pump that provides automatic pressure generation
and regulation in an in an easy-to-use, rugged, portable package.

The ideal portable pressure calibrator, the 729 allows you to simply
type in a target pressure, and the calibrator will automatically
pump to the desired set-point. Then, internal fine adjustment con­trol automatically stabilizes the pressure at the requested value.

The Fluke 729 can also automatically test multiple pressure test
points and automatically document the results. Calibration is as
easy as typing in the starting and ending pressure and the number
of test points and tolerance level. The 729 does the rest.

KEY PRESSURE FUNCTIONS:

Pressure sourcing/control and
measurement

KEY ELECTRICAL FUNCTIONS:

mA source, simulate and measure.
Measure mA with 24V loop power.

Measure Vdc and measure temperature
(with optional RTD probe).

FLUKE CONNECT COMPATIBILITY:

With Fluke Connect® mobile app and
desktop software compatibility, technicians
can wirelessly monitor and log measured
and sourced pressure values.

Built-in HART communication capabilities enable HART transmitter
mA adjustments, light HART configuration and the ability to adjust
to applied 0 % and 100 % values.

Upload and manage documented calibration results with DPCTrack2
Calibration Management Software, making it easy to manage your
instrumentation, create scheduled tests and reports, and manage
calibration data.

With three ranges to choose from, 30 psi (2 bar, 200 kPa), 150 psi
(10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), Fluke 729 Automatic
Pressure Calibrators are designed to perform when and where you
need them.

™

Automatic pressure generation and control to 300 psi, (20 bar,
2 MPa). Enter a pressure and the 729 automatically pumps to the
desired pressure. Fill in a test template and the 729 will automati­cally pump to and document a multiple-point pressure calibration
test.

Easy calibration documentation using defined templates for
transmitters and switches. Type in the starting and ending test
pressures and number of test points. The 729 does the rest by
documenting the applied pressure, measured mA and % error for
each test point. The bright color graphical display will flag out of
tolerance test results in red.

Automatic internal fine pressure adjustment helps compensate
for minor leaks in hoses and test setups. No need to manually turn
a vernier to compensate for leaks helping to eliminate the hassle
of manual pumping and manual fine adjustment of test setups.

Fluke 729 key features:

• Automatic pressure generation and

regulation to 300 psi

• Easily document the process using

onboard test templates

• Automatic internal fine-pressure

adjustment

• Measure, source and simulate

4 to 20 mA signals

• 24V loop power for powering

transmitters for tests

• Bright dual/triple-channel color

graphical display

• HART communication for testing

HART smart transmitters

• Built in leak testing for verifying

test setups for leakage

• Rugged portable design with

standard 3-year warranty

• Fluke Connect

®

App compatibility

• Measure temperature with optional

720RTD probe

• Measure Vdc for testing 1 V dc to

5 V dc output transmitters

• Compatible with 700 Series and

750 Series pressure modules

• Upload documented test results to

DPCTrack2
Software

™

Calibration Management

• Innovative semi-rigid carrying case

designed for field work

HART communication enables mA output trim, trim to applied
values and pressure zero trimming of HART pressure transmit­ters. You can also do light configuration tasks such as changing a
transmitter tag, measurement units and ranging. Other supported
HART commands include setting fixed mA outputs for trouble­shooting, read device configuration and variables and read device
diagnostics.

Measure mA signals on transmitter outputs, source and
simulate mA signals for testing I/Ps and other mA loop devices.

Includes a 24V loop power supply for testing and powering trans­mitters in standalone tests disconnected from the control system.

Rugged portable design and 3-year warranty set the 729 apart
from most other pressure calibrators. The 729 is tested and war­ranted to withstand a 1-meter drop test so it is ready for field
instrumentation calibration work.

Fluke Connect

monitoring using the Fluke Connect mobile app and also manage
and store pressure measurements and logging events. Share mea­surements using ShareLive

Measure temperature with optional 720RTD probe for performing
custody transfer calibrations.

Measure pressure with legacy 700 Series and the new 750
Series pressure modules if different pressure measurement ranges
or resolution is desired.

Multiple language support, select language from the instrument
setup utility. Hart communication commands are limited to English
per the HART device descriptors and protocol.

Semi-rigid carrying case designed for field work, with room in
the case to store test hoses, fittings, test leads and small hand
tools needed for field pressure calibrations.

®

compatibility enables a user to perform remote

™ video calls and emails.

2 Fluke Corporation Fluke 729 Automatic Pressure Calibrator

Specifications

Pressure specification*

One-year specification 0.02 % of full scale

Control specification 0.005 % full scale minimum

*See manual for detai led specif ications

Model Psi range, resolution Bar range, resolution kPa range, resolution Comment

729 30G -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa No wireless communication

729 150G -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa No wireless communication

729 300G -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa No wireless communication

729 30G FC -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa Wireless communication

729 150G FC -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa Wireless communication

729 300G FC -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa Wireless communication

729CN 200K -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa For China, no wireless communication

729CN 1M -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa For China, no wireless communication

729CN 2M -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa For China, no wireless communication

729CN 200K FC -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa For China, wireless communication

729CN 1M FC -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa For China, wireless communication

729CN 2M FC -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa For China, wireless communication

729JP 200K N/A N/A -82.737 to 206.843 kPa For Japan, no wireless communication

729J P 1M N/A N/A -82.73 to 1034.21 kPa For Japan, 1 MPa range, no wireless

729JP 2M N/A N/A -82.73 to 2068.43 kPa For Japan, 2 MPa range, no wireless

729JP 200K FC N/A N/A -82.737 to 206.843 kPa For Japan, wireless communication

729JP 1M FC N/A N/A -82.73 to 1034.21 kPa For Japan, wireless communication

729JP 2M FC N/A N/A -82.73 to 2068.43 kPa For Japan, wireless communication

Electrical specification

All specifications are valid to 110 % of range, except 24 mA source and simulate which are valid to 100 % of range.

Ranges

mA measure, source and simulate 0 mA to 24 mA

Volts dc measure 0 V dc to 30 V dc

Resolution

mA dc source, simulate and measure 1 μA
Voltage dc measurement 1 mV
Accuracy 0.01 % ± 2 LSD all ranges (at 23 °C ± 5 °C)
Stability 20 ppm of full scale /°C from -10 °C to +18 °C and 28 °C to +50 °C
Loop compliance voltage 24 V dc @ 20 mA
mA simulate external voltage requirement 12 V dc to 30 V dc
Temperature measurement only/100 Ω Pt(385)

RTD
Temperature resolution 0.01 °C (0.01 °F)
Temperature accuracy ± 0.1 °C (0.2 °F) ± 0.25 °C (± 0.45 °F) combined uncertainty when using 720 RTD probe

Drive capability 1200 Ω without HART resistor, 950 Ω with internal HART resistor

-50 °C to 150 °C (-58 °F to 302 °F)

(optional accessory)

for Fluke Connect

for Fluke Connect

for Fluke Connect

for Fluke Connect

for Fluke Connect

for Fluke Connect

communication

communication

for Fluke Connect

for Fluke Connect

for Fluke Connect

3 Fluke Corporation Fluke 729 Automatic Pressure Calibrator

General specifications

Mechanical specification

Size (HxWxL) 7 cm x 27.94 cm x 17.27 cm (2.75 in x 11 in x 6.8 in)
Weight 6.5 lbs., 2.95 kg
Ingress protection IP54

Environmental specification

Operating temperature -10 °C to 50 °C for measurement, 0 °C to 50 °C for pressure control
Operating temperature with battery -10 °C to 40 °C
Battery will only charge to 40 °C
Storage temperature -20 °C to 60 °C
Operating altitude 3000 m
Storage altitude 13000 m

Wireless (729FC only)

Radio frequency certification FCC ID: T68-FBLE IC:6627A-FBLE
Wireless radio frequency range 2412 MHz to 2462 MHz

Ordering information

Model Description Comment

FLK-729 30G Fluke 729 30G, 30 psi, 2 Bar Automatic Pressure

Calibrator

FLK-729 150 G Fluke 729 150G, 150 psi, 10 Bar Automatic

Pressure Calibrator

FLK-729 30 0G Fluke 729 300G, 300 psi, 20 Bar Automatic

Pressure Calibrator

FLK-729 30G FC Fluke 729 30G FC, 30 psi, 2 Bar Automatic

Pressure Calibrator, with Fluke Connect

FLK-729 150G FC Fluke 729 150G FC, 150 psi, 10 Bar Automatic

Pressure Calibrator, with Fluke Connect

FLK-729 300G FC Fluke 729 300G FC, 300 psi, 20 Bar Automatic

Pressure Calibrator, with Fluke Connect

FLK-729CN 200K Fluke 729CN 200K, 200 kPa Automatic Pressure

Calibrator, China

FLK-729CN 1M Fluke 729CN 1M, 1 MPa Automatic Pressure

Calibrator, China

FLK-729CN 2M Fluke 729CN 2M, 2 MPa Automatic Pressure

Calibrator, China

FLK-729CN 200K FC Fluke 729CN 200K FC, 200 kPa Automated

Pressure Calibrator, China with Fluke Connect

FLK-729CN 1M FC Fluke 729CN 1M FC, 1 MPa Automatic Pressure

Calibrator, China with Fluke Connect

FLK-729CN 2M FC Fluke 729CN 2M FC, 2 MPa Automatic Pressure

Calibrator, China with Fluke Connect

FLK-729JP 200K Fluke 729JP 200K, 200 kPa Automatic Pressure

Calibrator, Japan

FLK-729JP 1M Fluke 729JP 1M, 1 MPa Automatic Pressure

Calibrator, Japan

FLK-729JP 2M Fluke 729JP 2M, 2 MPa Automatic Pressure

Calibrator, Japan

FLK-729JP 200K FC Fluke 729JP 200K FC, 200 kPa Automatic Pressure

Calibrator, Japan with Fluke Connect

FLK-729JP 1M FC Fluke 729JP 1M FC, 1 MPa Automatic Pressure

Calibrator, Japan with Fluke Connect

FLK-729JP 2M FC Fluke 729JP 2M FC, 2 MPa Automatic Pressure

Calibrator, Japan with Fluke Connect

30 psi, 2 bar range, no wireless communication

150 psi, 10 bar range, no wireless communication

300 psi, 20 bar range, no wireless communication

30 psi, 2 bar range, includes wireless communication for
Fluke Connect

150 psi, 10 bar range, includes wireless communication for
Fluke Connect

300 psi, 20 bar range, includes wireless communication for
Fluke Connect

For China, 200 kPa range, no wireless communication

For China, 1 mpa range, no wireless communication

For China, 2 MPa range, no wireless communication

For China, 200 kPa Range, includes wireless communication
for Fluke Connect

For China, 1 MPa range, includes wireless communication for
Fluke Connect

For China, 2 MPa range includes wireless communication for
Fluke Connect

For Japan, 200 kPa Range, no wireless communication

For Japan, 1 MPa Range, no wireless communication

For Japan, 2 MPa range, no wireless communication

For Japan, 200 kPa range, includes wireless communication for
Fluke Connect

For Japan, 1 MPa range, includes wireless communication for
Fluke Connect

For Japan, 2 MPa range, includes wireless communication for
Fluke Connect

4 Fluke Corporation Fluke 729 Automatic Pressure Calibrator

Ordering information
continued

Wireless versions include:

Calibrator with wireless communication,
soft case, stackable test leads, AC280 hook
clips, alligator clips, test probes, magnetic
hanger kit, carrying strap, wireless adapter,
quick start guide, safety sheet, power supply,
rechargeable battery (installed), hose kit
with push fit adapters, hanging clip, USB
cable, 1/8 in FNPT to 1/4 in FNPT adapter,
1/8 in FNPT to F-M20 adapter, 1/8 in FNPT to
1/4 in FBSP adapter, PTFE tape, (2) sintered
filters, water trap drain and valve tuning
hoses.

Versions with no wireless functionality
include:

Calibrator without wireless communication,
soft case, stackable test leads, AC280 hook
clips, alligator clips, test probes, magnetic
hanger kit, carrying strap, quick start guide,
safety sheet, power supply, rechargeable
battery (installed), hose kit with push fit
adapters, hanging clip, USB cable, 1/8 in
FNPT to 1/4 in FNPT adapter, 1/8 in FNPT to
F-M20 adapter, 1/8 in FNPT to 1/4 in FBSP
adapter, PTFE tape, (2) sintered filters, water
trap drain and valve tuning hoses.

Preventive maintenance simplified. Rework eliminated.

Save time and improve the reliability of your maintenance data by
wirelessly syncing measurements using the Fluke Connect® system.

• Eliminate data-entry errors by saving measurements directly from the
tool and associating them with the work order, report or asset record.

• Maximize uptime and make confident maintenance decisions with data
you can trust and trace.

• Access baseline, historical and current measurements by asset.

• Move away from clipboards, notebooks and multiple spreadsheets with

a wireless one-step measurement transfer.

• Share your measurement data using ShareLiveTM video calls and emails.

• Fluke 729 Automatic Pressure Calibrator is part of a growing system of

connected test tools and equipment maintenance software. Visit the
website to learn more about the Fluke Connect

®

system.

Find out more at flukeconnect.com

5 Fluke Corporation Fluke 729 Automatic Pressure Calibrator

All t radema rks are the property of their respective owner s. WiF i or cellular serv ice req uir ed to sha re
data. Smartphone, w ireless ser vice and data plan not i nclude d with purchase. Fi rst 5 GB of storage is
free. P hone support det ails can be v iewed at f luke.com/phones.

Smart phone wireless service and data plan not included w ith purchase. Fluke Connect
is not available in all countries.

Fluke. Keeping your world up and running.®.

Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

Modification of this document is not
permitted without written permission
from Fluke Corporation.

For more information call:

In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2017 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 3/2017 6008874c-en