Fluke 27 II, 28 II, 83V, 87V Brochure
Sales conversion guide
Dirt and dust
Dirt and dust
Durable/waterproof
Backlight
Dirt and dust
Backlight
Dirt and dust
Durable/waterproof
Temperature range
Shock and vibration
Backlight
Dirt and dust
Durable/waterproof
Temperature range
Shock and vibration
Tested-tough buttons CAT III/CAT IV rating
Water and humidity
Backlight
Dirt and dust
Shock and vibration
CAT III/CAT IV rating
Backlight
Dirt and dust
Fluke 27 II and
28 II DMMs
Move up to the Fluke
27 II/28 II Industrial
Multimeters:
Everything from the
80 Series, plus a waterproof
and dustproof case for use
in harsh environments.
Durable/waterproof
Dirt and dust
Fluke 83V
Industrial
DMM
Temperature range
Backlight
Fluke 87 V
True RMS
Industrial DMM
Fluke
27 II/28 II
Industrial Multimeter
The NEW Fluke 27 II and 28 II digital multimeters define a new
standard for operating in harsh conditions with the features and
accuracy to troubleshoot most electrical problems.
Both meters have IP 67 waterproof and dustproof cases, completely
sealed for use in harsh environments, and are designed to withstand a three (3) meter drop to a concrete floor (with holster).
The Fluke 27 II and 28 II have MSHA approvals (pending), and
provide an extended operating temperature range of -15 °C to
+55 °C (5 °F to 131 °F, -40 °C for up to 20
minutes) and 95 % humidity.
The Fluke 28 II offers a hi-resolution 20,000 count display mode,
plus true-rms ac voltage and current for accurate measurements
on non linear signals.
Water and humidity
Shock and vibration
Military spec
Tested-tough buttons
CAT III/CAT IV rating
Fluke Corporation’s most
rugged industrial multimeter
Fluke 80 Series to 27 II / 28 II comparison table
Models 87 V Water and
chemical
resistant 28 II
Basic features NEW NEW
Counts 20000 20000 6000 6000
True-rms readings ac voltage/current ac voltage/current
Basic dc accuracy 0.05 % 0.05 % 0.1 % 0.1 %
Wide bandwidth 20kHz 20 kHz 5 kHz 30 kHz
Auto/manual ranging • / • • / • • / • • / •
Digits 4-1/2 4-1/2 3-1/2 3-1/2
Measurements
Voltage ac/dc 1000V 1000 V 1000 V 1000 V
Current ac/dc 10 A 10 A 10 A 10 A
Resistance 50 MΩ 50 MΩ 50 MΩ 50 MΩ
Frequency 200 kHz 200 kHz 200 kHz 200 kHz
Capacitance 10,000 µF 10,000 µF 10,000 µF 10,000 µF
Temperature (+) 1090 °C (+) 1090 °C
Conductance 60 nS 60 nS 60 nS 60 nS
Duty cycle/pulse width • / − • / − • / − • / −
Continuity/diode test • • • •
Motor Drive (ASD) measurements • •
Microamps • • • •
Display
Analog bargraph • • • •
Backlight Two level Two level Two level Two level
Min-Max recording • / − • / − • / − • / −
Fast min-max 250 µs 250 µs
Display hold/auto (touch) hold • / • • / • • / • • / •
Relative reference • • • •
Other features
Removable holster • • • •
Closed case calibration • • • •
Separate battery/fuse access • / − • / • • •
Completely sealed/watertight • •
Automatic power off • • • •
Low battery indication • • • •
Operating temperature range -20 °C, +55 °C -40 °C, +55 °C -20 °C, +55 °C -40 °C, + 55 °C
Warranty and electrical safety
Warranty (years) Lifetime Lifetime Lifetime Lifetime
Input alert • • • •
Dangerous voltage indication • • • •
IP rating IP 30 IP 67 IP 30 IP 67
EN61010-1 CAT III 1000 V 1000 V 1000 V 1000 V
EN61010-1 CAT IV 600 V 600 V 600 V 600 V
83V Water and
chemical
resistant 27 II
©2010 Fluke Cor poration. Speci fication s subjec t to change without notice.
Printed in U.S.A. 6/2010 3821028A F-EN- N
Loading...