Fluke 2051, 2050, 2055, 2056, 2057 Specifications

Liquid Bath Accessories

Mechanical support for probes

When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid.
We recommend our modular mechanical support systems. Made of fine-quality steel and
machined parts, these support components combine in hundreds of ways to solv e almost any
probe suspension problem.

Single probe kit

Our single probe kit is a good way to get started. It has one medium clamp, one 10-inch rod, one
bosshead, and one V-base for holding one probe.

Economy kit

Our economy kit includes two V-bases, one 29-inch stainless steel rod, two 23-inch rods, five
bossheads, two micro-clamps, and one medium clamp. This will build a bench -mounted frame for
suspending one rod and three clamps over a bath opening. Simply add to your setup as needed.
Choose from any of the listed accessories.

PO Box 1073, 8 Leroy Road, Williston, VT 05495 USA • fax [phone] • ph 802-863-0085 • toll free 800-235-8367

Individual hardware

Our selection of clamps and stands provides a simple way to
hold probes and thermometers in baths during calibration.
System components can be assembled in a number of ways to
suit individual needs. Select clamps, rods, bossheads, and
bases to fit your individual needs.

Ordering Information

Selected kits Model
Single probe kit Includes: 1 medium clamp, 1 10-inch rod, 1 bosshead, and

1 V-base

Economy kit Includes: 2 V-bases, 1 29-inch stainless steel rod, 2 23-

inch rods, 5 bossheads, 2 micro-clamps, and 1 medium
clamp

Individual hardware
Micro-clamps Holds thermometers and probes with diameters to 0.75

inch.

Medium clamp Holds diameters up to 1.75 inches. 2056 (Pkg. of 1)
Non-slip tape Increases grip on clamps and bossheads. 2057 (1 roll)
Stainless steel rods Used to assemble supports, frameworks, or scaffolds.

Bossheads Clamps two rods at right angles. Also attaches clamps to

rods.

Screw bases Holds one rod and is screwed to the surface of your bench

or bath lid. 2.5-inch-diameter base; screws included.

V-base Holds one rod. Weighted for excellent stability. 2.2 pounds

(1 kg).

Large V-base Same as above but larger. Recommended for holding

SPRTs and large probes. 4.4 pounds (2 kg). (May be too
large for some baths.)

2051

2050

2055 (Pkg. of 2)

2058 10" (Pkg. of 1)
2059 20" (Pkg. of 1)
2060 23" (Pkg. of 1)
2061 29" (Pkg. of 1)
2062 (Pkg. of 5)

2063 (Pkg. of 4)

2064 (Pkg. of 1)

PO Box 1073, 8 Leroy Road, Williston, VT 05495 USA • fax [phone] • ph 802-863-0085 • toll free 800-235-8367