Meters designed for the way you work
ADVANCED METERS GENERAL PURPOSE COMPACT METERS SPECIALTY METERS
289 87V 3000 FC 179 117 116 115 28 II 1587 F C
Best for
Advanced industrial
troubleshooting, including
data logging and graphing
intermittent problems
Industrial troubleshooting Commercial and industrial
electrical/electronic
troubleshooting and
maintenance
Everyday use for
industrial and electrical
troubleshooting and
maintenance
Wide variety of electrical
work
HVAC troubleshooting Electronic and field service
applications
Harsh environments
requiring dustproof and
waterproof test equipment
Advanced troubleshooting
and preventive maintenance
with high performance
2-in-1 insulation DMM
Working on VSDs/VFDs:
Take accurate voltage, current
and frequency measurements
on the output side of the drive
at either the drive itself or at
the motor terminals.
Graphing: View logged values
graphically in the field right
on the meter, without a PC.
Applications
Basic features
Counts 50,000 20,000 6,000 6,000 6,000 6,000 6,000 20,000 6,000
True-rms readings ac+dc ac ac ac ac ac ac ac ac
Basic dc accuracy 0.025 % 0.05 % 0.09 % 0.09 % 0.5 % 0.5 % 0.5 % 0.05 % 0.09 %
Wide bandwidth 100 kHz 20 kHz 20 kHz 5 kHz
Auto/manual ranging •/• •/• •/• •/• •/• •/• •/• •/• •/•
Measurements
Voltage ac/dc 1000 V 1000 V 1000 V 1000 V 600 V 600 V 600 V 1000 V 1000 V
Current ac/dc 10 A 10 A 400 mA 10 A 10 A 60 0 µA 10 A 10 A 4 00 mA
Resistance 500 MΩ 50 MΩ 50 MΩ 50 MΩ 40 MΩ 40 MΩ 40 MΩ 50 MΩ 50 MΩ
Frequency 1 MHz 200 k Hz 100 kH z 10 0 k Hz 100 kH z 10 0 k Hz 100 kH z 200 kHz 100 kH z
Capacitance 100,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF
Temperature (+) 1350 °C (+) 1090 °C (with t3000 FC*) (+) 400 °C (+) 400 °C (+) 1090 °C (+) 537 °C
Insulation test voltages 50, 100, 250, 50 0, 1000 V
Pi/DAR timed ratio tests
*Sold separately
Logging: For unattended
monitoring of signals over
time, to detect intermittent
problems.
Testing motor windings or
contact resistance: Allows
testing of resistance up to
50 ohms with one milliohm
(0.001ohm) resolution.
Yes (with ir3000 FC
connector, sold separately)
Working on VSDs/VFDs:
Take accurate voltage, current
and frequency measurements
on the output side of the drive
at either the drive itself or at
the motor terminals.
Industrial troubleshooting:
All of the resolution and accuracy you need to solve more
problems on motor drives,
in-plant automation, power
distribution, and electromechanical equipment.
Checking power quality:
Capture glitches and spikes as
short as 250 μs. Identify
irregular signals.
Work faster and safer with
Fluke Connect (FC) wireless
test tools:
The 3000 FC wireless multimeter and associated wireless
modules allows users to work
safer, log time stamped readings, be in two places at once
and see multiple readings
simultaneously to solve complex electrical problems faster.
Build the system as your
needs grow: Start with the
multimeter and expand your
measurement and troubleshooting capabilities by
adding additional meters to
meet your specific applications
including three-phase load
studies with iFlex or voltage
monitoring.
Yes (see connected products
on reverse side)
Electrical maintenance and
troubleshooting: Variety of
commercial electrical troubleshooting, installation and
maintenance.
Temperature measurements:
Built-in thermometer conveniently allows you to take
temperature readings without
having to carry a separate
instrument.
Electrical maintenance
troubleshooting: When you
need to eliminate false or
“ghost” voltages or perform
continuity, connection or basic
wiring checks.
Non-contact voltage detection: Integrated non-contact
voltage detection simplifies
many tasks.
Residential HVAC maintenance: Lower voltage HVAC
residential maintenance, installation and troubleshooting.
Temperature and microamp
measurements: Trouble-
shooting problems with HVAC
equipment and flame sensors.
Electronic troubleshooting:
Troubleshoot a wide variety
of measurement parameters,
including frequency and
capacitance.
Industrial troubleshooting
in indoor and outdoor harsh
environments: Dustproof,
waterproof, shockproof multimeter designed to withstand
the toughest environments.
Working on VSDs: Take
accurate voltage, current and
frequency measurements on
the output side of the drive at
either the drive itself or at the
motor terminals.
Combine a digital insulation
tester with a full-featured,
true-rms digital multimeter in
a single, compact, handheld
unit, which provides maximum versatility for both troubleshooting and preventative
maintenance.
Industrial troubleshooting: Whether you work on
motors, generators, cables,
or switch gear, the Insulation
Multimeters is ideally suited
for predictive and preventive
maintenance measurement
tasks in electrical and
industrial applications. Polarity Index (Pi) and Dielectric
Absorption Ratio (DAR) tests
identify problems faster.
Yes (coming early 2016)
•
Meters designed for the way you work
ADVANCED METERS GENERAL PURPOSE COMPACT METERS SPECIALTY METERS
289 87V 3000 FC 179 117 116 115 28 II 1587 F C
Measurements
Continuity/diode test
Motor Drive (ASD) Measurements
dB / Conductance (in nS) 60 dB / 50 n S 60 nS 60 nS
Duty cycle/pulse width •/• •/– •/–
LoZ: low input impedance
Lo ohms
Microamps
Display
Dot matrix display/Dual display
Analog bargraph
Backlight Two level T wo level
Graphical trend display
Diagnostics and data
Min/Max recording/with time stamp •/• •/– •/– •/– •/– •/– •/– •/– •/–
Fast Min/Max 250 µs 250 µs 250 µs
Display Hold/Auto (Touch) Hold •/• •/• •/• •/• •/– •/– •/– •/• •/•
Relative reference
Stand alone logging
Trend capture
Readings memories 10,000 (with FC app) (with FC app)
USB interface
Warranty and electrical safety
Warranty (years) Limited lifetime Limited lifetime 3 Limited lifetime 3 3 3 Limited lifetime 3
Input alert
Dangerous voltage indication
IP rating IP42 IP30 IP54 IP42 IP42 IP42 IP67 IP40
EN61010-1 CAT III 1000 V 1000 V 1000 V 1000 V 600 V 600 V 600 V 1000 V 1000 V
EN61010-1 CAT IV 600 V 600 V 600 V 600 V 600 V 600 V
• • • • • • • • •
• • • •
• • •
•
• • • •
• •
• • • • • • •
• • • • •
•
• • •
•
•
•
• • • •
• • • • • • • • •
Two level
•
The largest s ystem of
software and wireless
test tools in the world.
Learn more at flukeconnect.com
Wirelessly relay data with Fluke Connect®
Meters can be used as a stand-alone tool or as part of the Fluke Connect system
ir3000 FC
Connector
Adds the power of the
Fluke Connect® mobile app
to your measurements.
• Fits over t he IR port of your
exis ting F luke tools (289, 287
or 789)
• Enables you to graph, save,
and share read ings w ith your
team from your smart phone
a3000 FC
Wirel ess AC Curren t
Clamp Meter
• Measure up to 400 A ac
true-rms
• Inrush function
• Loggi ng function for
recording and saving up to
65,000 readings
a3001 FC
Wireless iFlex AC
Curr ent Cla mp Mete r
• Measure up to 2500 A ac
with a t rue-rms flexible
cur rent meter
• Record over time (up to
65,000 readi ngs) to monitor
circ uit load changes for an
hour, a sh ift or a week
Phone sup port deta ils ca n be view ed at fluk e.com/p hones. Appl e and the App le logo are t radema rks of Apple I nc. reg istere d in the U.S . and othe r countr ies. App S tore is a ser vice m ark of Apple I nc. Goog le Play is a t rademark o f Google In c. 8/2015 6005195a-en
a3003 FC
Wirel ess DC 20 00 A
Current Meter
• Measure up to 2000 A dc
• Large jaw size (64 mm)
• Loggi ng function for
©2015 Fluke Cor poration . All t rademar ks are th e propert y of thei r respec tive ow ners. Wi Fi or cel lular s ervic e requ ired to sh are data . Smar t phone, wi reless se rvic e and data pl an not inc luded wit h purch ase. Fi rst 5 GB of st orage is f ree.
for measuring large, high
current conductors
recording and saving up to
65,000 readings
a3004 FC
Wireless DC 4-20 mA
Current Meter
• Measure 4 to 20 mA dc signals
without breaking the loop
• Logging function for recording
and saving up to 65,000
readings
v3000 FC
Wireless AC Voltage Meter
• Measure up to 1000 V
true-rms ac
• Loggi ng function for
recording and saving up to
65,000 readings
v3001 FC
Wireless DC Voltage Meter
• Measure up to 1000V dc
• Loggi ng function for
recording and saving up to
65,000 readings
t3000 FC
Wireless Temperature Meter
• Measure -200 °C to 1372 °C
with k-type thermocouple
• Loggi ng function for
recording and saving up to
65,000 readings