Nuclear Associates 07-487
Dual-Range Digital mAs Meter
Operators Manual
July, 2008
Manual No. 07-487-1 Rev. 4
©2003, 2005, 2008 Fluke Corporation, All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies
Fluke Biomedical
6045 Cochran Road Cleveland, Ohio 44139 440.498.2564
www.flukebiomedical.com/
Table of Contents
Section 1: Product Information & Usage ................................................................... |
1-1 |
|
1.1 |
Warnings...................................................................................................... |
1-1 |
1.2 |
Introduction .................................................................................................. |
1-1 |
1.3 |
Assembly Description .................................................................................. |
1-1 |
1.4 |
Specifications............................................................................................... |
1-2 |
1.5 |
Connection and Use of the mAs Meter ........................................................ |
1-2 |
1.6 |
Circuits That Do Not Permit the Use of the mAs Meter................................ |
1-2 |
1.7 |
User Hints .................................................................................................... |
1-3 |
1.8 |
Receiving Inspection.................................................................................... |
1-3 |
1.9 |
Storage ........................................................................................................ |
1-3 |
1.10 |
Procedures, Warnings, and Cautions .......................................................... |
1-3 |
Section 2: |
Calibration .................................................................................................. |
2-1 |
2.1 |
Bias Adjustment........................................................................................... |
2-1 |
2.2 |
Use of Precision Calibrator .......................................................................... |
2-1 |
2.3 |
Alternative Calibration Method..................................................................... |
2-1 |
2.4 |
Over-Range Indication................................................................................. |
2-2 |
2.5 |
LO BAT Indication........................................................................................ |
2-2 |
i
(Blank page)