Fluke 107 Specifications

TECHNICAL DATA

Fluke 107 Palm-sized,
CAT III Digital Multimeter

Professional measurements in the palm of your
hand

The Fluke 107 is a compact, easy-to-use multimeter made to fit
the way you work. It is the perfect first-pass troubleshooting tool:
small enough to fit in a shirt pocket or work bag, tough enough
to withstand daily use, and extremely simple to use. All without
compromising safety. For everyday applications, where true-rms
accuracy isn’t needed, the Fluke 107 delivers reliable measure­ments time after time.

Product highlights

• AC/DC voltage to 600 V

• AC/DC current to 10 A

• Resistance and Continuity to check for broken wires

• Data hold and backlit display to keep you working safe and fast

Electrical specifications

Accuracy is specified for 1 year after calibration, at operating temperatures of
18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take
the form of: ±([% of Reading] + [Number of Least Significant Digits])

Function Range

AC volts
(40 Hz to 500 Hz)

SIZE (H X W X L)

142 mm x 69 mm x 28mm

WARRANTY

1-year

FLUKE 107 COMPLETE TEST FUNCTIONS

• Including AC and DC voltage measurement

• AC and DC current measurement

• Resistance measurement

• Capacitance measurement

• Diode measurement

• Frequency and duty cycle test and other
functions to meet basic electrical maintenance,
electrical measurement, and electronic
measurement applications

DC volts

AC millivolts 600.0 mV 0.1 mV 3.0 % + 3
Diode test 2.000 V 0.001 V 10 %

Resistance (ohms)

Capacitance

Frequency
(10 Hz to 100 kHz)

Duty cycle 0.1 % to 99.9 % 0.1 % 1 % typ ic al

AC current
(40 Hz to 200 Hz)

DC current

Backlight — — Yes

 All AC, Hz, a nd duty c ycle are spec ified from 1 % to 100 % of range. Inputs below 1 % of range are not

specified.
 Typical ly, open circuit test voltage is 2.0 V and shor t circuit c urrent is < 0.6 m A.
 Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5

nF in the 50 nF range).
 All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not

specified.
 Typical means when the frequenc y is at 50 Hz or 60 Hz and the duty cycle is bet ween 10 % and 90 %.

6.000 V

60.00 V

600.0 V

6.000 V

60.00 V

600.0 V

400.0 

4.000 k

40.00 k

400.0 k

4.000 M

40.00 M

50.00 nF

500.0 nF

5.000 F

50.00 F

500.0 F
1000 F

50.00 Hz

500.0 Hz

5.000 kHz

50.00 kHz

100.0 k Hz

4.000 A

10.00 A

4.000 A

10.00 A

Resolution Accuracy

0.001 V

0.01 V

0.1 V

0.001 V

0.01 V

0.1 V

0.1 

0.001 k 

0.01 k 

0.1 k

0.001 M 

0.01 M 

0.01 n F

0.1 nF

0.001  F

0.01  F

0.1 F
1 F

0.01 H z

0.1 Hz

0.001 k H z

0.01 k H z

0.1 kHz

0.001 A

0.01 A

0.001 A

0.01 A

1.0 % + 3

0.5 % + 3

0.5 % + 3

0.5 % + 2

0.5 % + 2

0.5 % + 2

0.5 % + 2

1.5 % + 3
2 % + 5

2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5

0.1 % + 3

1.5 % + 3

1.5 % + 3

Specifications continued

Electrical specifications

Function

AC volts 600 V

AC millivolts 600 mV

DC volts 600 V

 6 x 105 V H z Max
 For mV (AC), input impedance is approximately 1 M.

Overload
protection

General specifications

Maximum voltage between any terminal and earth ground 600 V
Display (LCD) 6000 counts, updates 3/sec
Battery type 2 AAA, NEDA 24A, IEC LR03

Battery life 200 hours minimum
Temperature Operating: 0 °C to 40 °C

Relative humidity Operating Humidity: Non-condensing when < 10°C

Altitude Operating: 2000 m

Temperature
coefficient

Fuse protection for
current inputs

Size (HxWxL) 142 mm x 69 mm x 28mm

Input impedance
(nominal)

> 10 M

< 100 pF

>1M

<100 pF
> 10 M

< 100 pF

Common mode
rejection ratio

> 60 dB at dc, 50 Hz or

60 Hz

> 80 dB at

50 Hz or 60 Hz

> 100 dB at dc, 50 Hz or

60 Hz

Normal mode rejection
ratio

Storage: -30 °C to 60 °C

≤ 90 % at 10 °C to 30 °C;

≤ 75 % at 30 °C to 40 °C

Operating Humidity, 40 M Range:

≤ 80 % at 10 °C to 30 °C;

≤ 70 % at 30 °C to 40 °C

Storage: 12,000 m

0.1 X (specified accuracy)/°C
(< 18 °C or > 28 °C)

11 A, 1000 V Fast Fuse, Fluke

specified part only

> 45 dB at

50 Hz or 60 Hz

—

—

Weight 200 g
IP rating IEC 60529: IP 40
Safety IEC 61010-1: 600 V CAT III, Pollution Degree 2
Electromagnetic

IEC 61326-1: portable

environment
Electromagnetic

compatibility

Applies to use the Korea only.

Class A Equipment

(Industrial broadcasting and

communication equipment)

Warranty One year

 This product meets requi rements for indu strial (Class A) electromagnetic wave equipment and seller or user should take notice of it. This equipment is intendedfor use in business

environments and is not to be used in home.

Ordering information

FLUKE-107 ESP Palm-sized, CAT III Digital
Multimeter

Included equipment

TL75 Hard Point™ Test Lead Set
Two AAA Batteries (installed)
SmartStrap™ Intelligent Magnetic

Multi-purpose Lanyard

Fluke. Keeping your world
up and running.

Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

Modification of this document is not
permitted without written permission
from Fluke Corporation.

For more information call:

In the U.S.A. [phone] or

®

Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2013, 2019 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 9/2019 6000021c-en

2 Fluke Corporation Fluke 107 Palm-sized Digital Multimeter: Put measurements in the palm of your hand