Fluke 10 Series
Multimeters
Product Home | Features | Specifications |
Models, Options & Accessories
Compact, Easy-to-Use
DMMs, Ideal for Basic
Electrical Testing
Our economical 10 Series models are
designed to support first level
electrical and electronic
troubleshooting. Their compact
design, slide-switch and pushbutton
controls allow true one-hand
operation.
Register your Fluke Multimeter here
Download application notes for more information on multimeter procedures.
4000 Count digital display●
Fast continuity beeper●
Diode test●
V Check™ (11 and 12 only): simplifies voltage measurements in power
environments. When measuring ohms/continuity with more than 4.5
volts present across the input jacks (intentional or not), the meter
automatically switches to measuring AC or DC volts, whichever is
greater. Input impedance is approximately 2 kOhms, helping
determine if voltage is from leakage (so-called 'ghost' voltages) or a
hard connection. Overload protection is provided if the circuit is
checked in ohms mode.
●
Capacitance, 1.000 µF to 9999 µF (11 and 12 only)●
Continuity Capture (12 only): locates intermittent opens and shorts as
brief as 250 ‘s and identifies them in a symbolic display as a
short-to-open or open-to-short transition
●
Min/Max recording with relative time stamp, records the highest and
lowest voltage readings during a 100-hour period (12 only)
●
Sleep Mode, to preserve battery life●
© 1995 - 2000 Fluke Corporation
Privacy Statement
Loading...