Flir ONE Pro LT Quick Start Guide

QUICK START GUIDE

Third Generation

For Android and iOS

FLIR ONE PRO LT QUICK START GUIDE

STEP 1

Charge the FLIR ONE Pro LT using the included USB-C power cable
connected to a 1A power source. The Charge Indicator LED next to the

USB-C connection blinks on and o while the FLIR ONE Pro LT is charging

and stays on continuously when it is fully charged. It will take about an
hour to completely charge your FLIR ONE Pro LT. Ensure the device is fully

charged before using it the rst time.

Note: The power cable for the iPhone (with a Lightning connector) will not work to
charge the FLIR ONE Pro LT iOS model.

STEP 2

Download and install the FLIR ONE app, which is available through the Apple
App Store and Google Play Store. When you start the FLIR ONE app, the

rst-time User Guide will help you get started with the FLIR ONE Pro LT.

STEP 3

Press the power button on the bottom of the FLIR ONE Pro LT to turn it

on. The indicator light will turn orange. It will ash green when the device

is ready. If needed, adjust the blue dial of the OneFit™ and extend the

connector to the appropriate length to t through your smartphone’s

protective case. Connect the FLIR ONE Pro LT to your smartphone and
start the FLIR ONE app.

STEP 4

Check out the app’s Home screen to access your gallery, get the latest

Tips & Tricks for using your FLIR ONE Pro LT, share your photos and
videos with the FLIR ONE community, and stay up to date with all the
latest news and promotions from FLIR.

QUICK START GUIDE 2