FLIR MR59 Data sheet

BALL PROBE MOISTURE METER
WITH BLUETOOTH®

FLIR MR59

™

The MR59 is an aordable pinless meter for professionals

in moisture remediation, pest control, home or building

inspection, and floor installation. It is a high-quality,

reliable, and easy-to-use moisture-detection tool. Wireless

connectivity makes it easy to view readings on a mobile

device from the FLIR Tools® Mobile app when the meter’s

display is out of view. Thanks to the ball-probe sensor, the

user can cover a large area in a short time without making

a mark; measure into corners, over uneven surfaces,

and around baseboards; and detect problems below the

surface. The MR59 is a reliable standalone meter—or a

useful accessory to pair with a FLIR thermal imager.

LOCATE HIDDEN
MOISTURE EFFICIENTLY

Survey large areas quickly and non-destructively

• Easily run the meter over and around objects on the
measuring surface with the ball-probe sensor

• Create a heat map of the affected area and follow
the migration path to a hidden source of moisture

• Identify potential moisture problems up
to 100 mm (4 in) below the surface

www.flir.com/mr59

INSPECT ANYWHERE
WITH EASE

Designed to make your job easier and more efficient

• Wirelessly connect the meter to FLIR Tools
Mobile to view readings on a mobile device

• Work in dim lighting with the backlit
display and bright worklight

• Use with the MR04 extension pole to reduce the need
for a ladder, or to optimize ergonomics for ‘high’ and
‘low’ measuring targets (accessory not included)

RELY ON THIS METER
TO GET THE JOB DONE

Take the durable, drop-tested meter to ever y job

• Detect moisture in a wide range of
common building materials

• Receive stable, repeatable readings. The
meter’s handgrip is designed to prevent hands
from interfering with measurements

• Take advantage of product enhancements
by upgrading rmware as needed via micro
USB por t (located in bat tery compartment)

SPECIFICATIONS

Moisture Measurement Range Accuracy

Moisture 0 - 100% Relative measurement

Measurement
Detection Depth

General Information

Connectivity Bluetooth BLE

Worklight White LED

Display Backlit, multifunction LCD

Measurement Principle Capacitive (non-invasive)

Warranty Limited 3 years

Batte ry Type 9 V battery

Battery L ife Typical 4 0 hours without worklight

Battery Status Indicator 4-bar battery icon (100% to emp ty)

Auto Power Of f (APO) After 30 minutes

Operating RH/Temperature 90%, 0°C to 30°C (32°F to 86°F)

IP Rating IP40

Safety Compliance CE, RCM, FCC/IC

Drop Te st 2 m (6.6 ft)

Housing Material Impact-resistant plastic

Weight 245 g (8.6 oz)

Dimensions 24 0.5 x 67 x 38 mm (9.5 x 2.6 x 1.5 in)

Up to 100 mm (4 in) depending upon material under test

Communications Protocol: METERLiNK

®

75%, 30°C to 40 °C (86°F to 104°F)

45%, 40°C to 5 0°C (104°F to 122°F)

CORPORATE
HEADQUARTERS

FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
PH: +1 877.773.3547

NASH UA

FLIR Systems, Inc.
9 Townsend West
Nashua, NH 030 63
USA
PH: +1 866. 477.368 7

LAT IN A ME RIC A

FLIR Systems Brasil
Av. Antonio Bardella, 320
Sorocaba, SP 180 85 -8 52
Brasil
PH: [phone]

CANADA

FLIR Systems, Ltd.
920 Sheldon Cour t
Burlington, ON L7L 5K6
Canada
PH: +1 800.613.0507

Specifications are subje ct to change without notice. For the
most up -to-date specs, go to www.flir.com

www.ir.com
NASDAQ: FLIR

Equipme nt descri bed herein is subject to U S export
regulat ions and may require a lice nse prior to ex port.
Diversi on contra ry to US law is prohibite d. Imagery for
illustration purp oses only. Specic ations are s ubject to
change w ithout notice. ©2 018 FLIR Syste ms, Inc. A ll
rights reserved. 07/18

18 -1211- IN S