Flir C237VC, C237VD User Manual
On-Screen Display (OSD) Menu
Package Contents
Configure OSD menu options using the
integrated control stick on the camera
cable (see image to the right).
To use the OSD menu:
• OPTIONAL: Connect a test monitor to the
camera’s analog (yellow) BNC connector.
• Push the middle of the joystick to open the
OSD menu.
• Move the joystick / to select a setting,
then / to change the setting value.
• Push the middle of the joystick to confirm selection.
• Arrows beside settings indicate a submenu ( ).
Select the setting and push the joystick to enter.
• Select RETURN and push the joystick to return to the
previous menu, or EXIT from the main menu to exit.
See the full OSD menu tree below. For detailed explanation of camera settings, see the OSD
instruction manual on www.flir.com/security/support.
Language
Video Format
Backlight
DNR
Advanced Lens ELC
Version
Exit
OFF
WDR (MPX only)
BLC
HLC
ALC
Exposure
White Balance
Day&Night
Image
Special Black Level
Reset
Brightness
Shutter
Sens-Up
AGC
Auto
ATW
Preset
Manual
Mode
Delay
D N Level
N D Level
Smart IR
Smart IR Level
Sharpness
Color Gain
Freeze
Flip
D-Zoom
Defog
Privacy
DP Comp
• 1x Vandal Dome MPX Camera
• 4x Mounting Screws
• 4x Drywall Anchors
• 1x Star Key
• 1x Mounting Template
NOTE: Power adapter not included.
Safety Precautions
• Use an appropriate low voltage power cable to
prevent fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user serviceable parts inside the
camera. Please do not disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning
material. Please use a soft cloth to clean the lens
cover.
WDR Function Notice
WDR is not supported in analog output mode.
IT’S ALL ON THE WEB!
VISIT
www.flir.com/security/support
FLIR Systems, Inc., Copyright © 2015
As our products are subject to continuous improvement, FLIR Systems
Inc. reserves the right to modify product design, specifications and
prices, without notice and without incurring any obligation. E&OE
Vandal Dome MPX Camera
QUICK START GUIDE
English Version 2.0
www.flir.com/security/support
MODEL:
C237VC / C237VCP
C237VD / C237VDP
Installing the Camera
Setting up the Camera
Camera Specifications
Test the camera prior to selecting a permanent mounting location by
temporarily connecting the camera(s) and cables to the DVR.
1. Use the included Star key to loosen the screws on the
dome cover.
2. Use the included mounting template to mark and drill
holes for the included mounting screws.
NOTE: Insert the included drywall anchors if installing into
drywall.
3. (Optional) If you are not running the camera cable
through a wall, use pliers to create a notch to feed the
cable through.
4. Connect the video and power cable as detailed in the
section ‘Setting up the Camera.’
5. Attach the camera base to the mounting surface using
the included screws (4x).
6. Set the position and angle of the camera.
A) Rotate the camera around the base (rotates 360°
before it is stopped).
B) Use a Phillips screwdriver to loosen the adjustment
screws on both sides of the camera. Tilt the camera
module. Tighten both screws when finished.
C) Adjust the position of the camera lens by twisting
the camera lens module.
ATTENTION:
A
B
C
Adjustment screws (2x)
7. Replace the dome cover. Use the included Star key to
tighten the screws (3x).
NOTE: Make sure IR LEDs are not blocked by the dome
cover to prevent IR reflection.
1. Connect one of the two BNC connectors on the camera to the
video cable. See “Camera Wiring” for details.
2. Connect a power source to the power terminal block. The
camera supports both 12V DC and 24V AC power supplies.
NOTE: Make sure to follow correct polarity as marked on the
power connector. For AC power, connect multiple cameras using
consistent wiring polarity to prevent video rolling.
WARNING:
A REGULATED 12V DC or 24V AC power supply is REQUIRED for
use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Adjusting Zoom & Focus
Hold the joystick on the camera cable / to zoom in /
out. The camera will focus itself automatically.
NOTE: You can also adjust zoom and focus remotely
if the camera is connected to a FLIR MPX DVR using
the MPX video connector. See your MPX DVR’s
instruction manual for details.
Camera Wiring
Connect to a
12V DC or 24V AC
power supply.*
Analog
MPX
MPX
Connect to an MPX DVR for HD
viewing and recording. 720p or
1080p depending on model.
Analog
Connect to an analog DVR for
960H viewing and recording.
* Camera focus may be affected if the power connection is too
long. It is recommended not to extend the power connection
past 200ft (61m).
Extension Cable Options
The entire length of the cable run must be made using a
single extension cable between the camera and the DVR.
Specification Maximum Length
RG59 20AWG Conductor 95% Braid
Up to 1500ft (455m)
CSA/UL or C(UL) Approved
RG6 20AWG Conductor 95% Braid
Up to 2300ft (700m)
CSA/UL or C(UL) Approved
Analog CCTV Balun Up to 300ft (91m)
† Long cable runs over 1000ft (300m) may be affected by
electro-mechanical interference (EMI), which can increase the
amount of noise in the picture in some installations.
†
†
C237VC / C237VCP C237VD / C237VDP
Image Sensor
Video Format
Effective Pixels
Resolution
Scan System
Sync System
S / N Ratio
Iris
AES Shutter Speed
Min. Illumination
Video Output
Lens Focal
Length / Type
FOV (Horizontal)
Termination
IR Range / Qty.
Power Requirement
Power Consumption
Operating Temp.
Range
Environmental
Rating
Dimensions
(W x H)
Weight
1/3” 1.3MP
CMOS
NTSC (C237VC)
PAL (C237VCP)
H: 1305 V: 1049 H: 2048 V: 1536
Digital: 720p
Analog: 960H
1/60 (1/50) ~ 1/60,000 sec.
Digital: 720p MPX
HD-CVI
Analog: Composite
1.0Vpp @ 75ohm
2.8 ~ 12mm F1.4 / Zoom
90ft / 27m; 24 IR LED’s
–4° ~ 140°F / –20° ~ 60°C
Camera Dimensions
3.9”
100mm
1/2.8” 2.1MP
CMOS
NTSC (C237VD)
PAL (C237VDP)
Digital: 1080p
Analog: 960H
Progressive
Internal
≥ 50dB (AGC Off)
AES
0.1 LUX (IR Off)
Digital: 1080p MPX
HD-CVI
Analog: Composite
1.0Vpp @ 75ohm
30° - 82°
BNC Type
12V DC ± 10%
24V AC ± 10%
12V DC: 650mA
24V AC: 550mA
IP66
5.1” x 3.9”
130mm x 100mm
1.3lbs / 0.6kg
5.1 ”
130mm
Loading...