Fisher-Price W9741 Instruction Sheet

Please keep this instruction sheet for future reference,

Requires three “AA” batteries (included) for operation.

Adult assembly is required. Tool required for battery replacement:

Batteries included are for demonstration purposes only.
Wipe this toy with a clean damp cloth. Do not immerse.

This toy has no consumer serviceable parts. Do not take apart.

as it contains important information.

Phillips screwdriver (not included)

fisher-price.com

Battery Replacement

Battery Safety Information

1,5V x 3

“AA” (LR6)

For best performance, we recommend
replacing the batteries that came with
this toy with three new “AA” (LR6)
alkaline batteries.

• Loosen the screw in the battery

compartment door with a Phillips
screwdriver and remove the door.

• Remove the exhausted batteries and

dispose of them properly.

•

Insert three new “AA” (LR6) alkaline batteries.

• Replace the battery compartment door and

tighten the screw. Do not over-tighten.

• If this toy begins to operate erratically, you

may need to reset the electronics. Slide the
power/volume switch off and back on.

• When sounds or lights become faint or

stop, it’s time for an adult to change
the batteries.

• Protect the environment by not

disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.

In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or
ruin your product. To avoid battery leakage:

•

Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon­zinc) or rechargeable (nickel-cadmium).

•

Insert batteries as indicated inside the
battery compartment.

•

Remove batteries during long periods of non­use. Always remove exhausted batteries from
the product. Dispose of batteries safely. Do
not dispose of this product in a fire. The
batteries inside may explode or leak.

•

Never short-circuit the battery terminals.

•

Use only batteries of the same or equivalent
type, as recommended.

•

Do not charge non-rechargeable batteries.

•

Remove rechargeable batteries from the
product before charging.

•

If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.

Assembly

• Fit the tab on the basket into the slot under
the cash register. Push to “snap” in place.

Switch

Mode Switch

Mode Switch

4 Fun Play Modes!

Power/Volume

Power/Volume

Switch

Switch

• Slide the power/volume switch to ON

with low volume
volume

• Slide the mode switch to:
Learning Mode – Press the buttons

to learn numbers and hear sound effects!
Turn the sign to “open” and “close” the
market. Spin the roller to hear a song. Press
the scale to hear more songs and phrases.
“Scan” items to hear fun phrases.

Bilingual Mode – Press the buttons to

hear the numbers in Spanish and English!
Turn the sign to “open” and “close” the
market in Spanish and English! Spin the
roller to hear a song. Press the scale and
“scan” items to learn more words in Spanish
and English.

or ON with high

.

Music Mode – Press the buttons to play

a musical note. Turn the sign, spin the roller
or press the scale to hear a song. “Scan”
items to hear fun sound effects.

Imagination Mode – Hear lots of fun

sound effects when you press the buttons
or scale, turn the sign, spin the roller or
“scan” your items!

• When you are finished playing with this

toy, slide the power/volume switch OFF

.

Consumer Information

E

CONSUMER ASSISTANC

1-800-432-5437 (US & Canada)
1300 135 312 (Australia)

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.

Outside the United States:

Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.

Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk

Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.

Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.

New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

ICES-003

This Class B digital apparatus complies with
Canadian ICES-003.

Operation is subject to the following two
conditions : (1) this device may not cause
harmful interference and (2) this device
must

accept any interference received, including

interference that may cause undesired operation.

NMB-003

Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.

L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1)
il ne doit pas produire de brouillage et (2)
l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.

FCC Statement (United States Only)

This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the
equipment and receiver.

• Consult the dealer or an experienced radio/
TV technician for help.

Note: Changes or modifi cations not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device may
not cause harmful interference and (2) this
device must accept any interference received,
including interference that may cause
undesired operation.

©2012 Mattel. All Rights Reserved.

PRINTED IN CHINA W9741pr-0920