Fisher & Paykel RS90A1 User Manual

ALTERNATIVE INSTALLATION

698

120

360

900mm ActiveSmart™ Slide-in Refrigerator

Model no:

RS90A1

Custom Panel Dimensions

a Height of bottom drawer panel

B Minimum height of toekick panel*

C Minimum depth of toekick panel

* The bottom drawer panel can be extended lower to cover the grille. However

in this installation scenario the product needs to be raised a minimum of

50mm from the ﬂoor to allow for adequate air supply.

ISO VIEW PROFILE VIEW

AIR SPLITTER BLOCK

OPTIMISES AIR FLOW IN

AND OUT OF GRILLE

REAR VIEW OF BOTTOM PANEL

Note: this alternative installation will cause some restriction of air supply so

the fridge will not be operating at it’s optimum energy performance levels.

Additional Part (Air Splitter) Dimensions

D Overall height of block

E Overall width of block

F Overall depth of block

G Height from bottom of door panel to bottom of block*

H Distance from left edge of panel to centre of block**

* Presumes door panel height of 698mm

** Note measurement given from left when panel viewed from rear

Block to be manufactured and ﬁtted by cabinetmaker., it can be construced

out of MDF or similar material

Bottom door panel and block need to be adequately sealed to withstand

moisture (50OC @ 80% RH). The back and sides of the panel should be

completely sealed with a waterproof vapour barrier (ie polyurethane) to

prevent damage to the panel

INDICATES CAVITY CLEARANCES

DATE: 11.06.2015

IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (3/32''). Please read the installation manual for detailed information on installing the product. www.fisherpaykel.com