Fisher Paykel RS36A72J1 Data Sheet
in
36"
25"
115 VAC, 60 Hz
10 amp circuit
1/4" (6mm) PEX hose or copper tubing
(to suit local regulations)*
min 22 psi (150 kPa)
max 120 psi (827 kPa) @ 68°F (20°C)
CAVITY PREPARATION
36" ACTIVESMART™ BUILT-IN REFRIGERATOR
Model no:
RS36A72J1
C
A
B
Cavity Dimensions
a Overall height of cavity
B Overall width of cavity
when adjoining cabinetry cannot share 5/32" door gap
c Overall depth of cavity
Specifications
Electrical
Supply
Service
Plumbing
Supply
Pressure
NOTE: Recommended that the electrical & water connection be located above
the fridge cavity. Optional to locate in an adjacent cabinet to either side of
the fridge.
Do not locate water or electricity in this area, keep clear of connections.
CAUTION: Central area can only fit electrical plug if it is placed within a
!
recessed cavity.
* Customer to supply.
72"
ISO VIEW OF CAVITY
REAR OF CAVITY
IMPORTANT NOTE: The product dimensions and specifications apply at the date
of issue. Under our policy of continuous product improvement, these dimensions
and specifications may change at any time. Dimensions may vary by ±3/32
Please read the installation manual for detailed information on installing the
product or visit fisherpaykel.com.
''.
7357_FP_2015-08-21
DATA SHEET
in
71 27/32"
35 1/32"
3/4"
23 3/4"
4"
2"
17 5/16"
15 3/4"
11 13/16"
in
44 7/32"
17 3/4"
5/32"
23 15/32"
35 21/32"
5/32"
"
max 3/4"
22 pounds
21 pounds
in
5/32"
36"
25"
36" ACTIVESMART™ BUILT-IN REFRIGERATOR
35 1/32"
B
D
I
DATUM : FRONT OF CHASSIS
C
H
PLAN VIEW
K
L
J
P
J
G
DATUM : FRONT OF CHASSIS
WALL
C
D
Model no:
RS36A72J1
Product Dimensions
a Overall height of fridge
B Overall width of fridge
c Depth of fridge front panels (excl. handles)*
D Overall depth of fridge (excl. front door panels)
E Height from bottom datum to top of toekick
F Depth of toekick measured from front of door panels*
G Depth of door (widest opening) measured from front of
cabinetry
H Depth of drawer (open) measured from front of cabinetry*
I Minimum door clearance** to adjacent wall (115° – full internal
access)*
* Door panels to be manufactured and fitted by cabinetmaker, thickness min
5/8" – max 3/4".
** Measured from front cabinetry edge.
Custom Panel Dimensions
J Height of top door panel
K Width of top door panel
L Gap between top door panels
M Height of bottom drawer panel
N Width of bottom drawer panel
O Gap between top door panels and bottom drawer panel
P Depth of custom panels
Maximum weight of an individual top door panel
Maximum weight of bottom drawer panel
min 5/8
A
O
M
M
71 27/32"
E
N
CUSTOM PANELS
35 1/32"
B
F
FRONT VIEW PROFILE VIEW
DATUM : FLOOR (LEVEL)
Minimum Clearances
Minimum cabinetry gap clearance from edge of custom panels
Overall height of cavity
Overall width of cavity
when adjoining cabinetry cannot share 4mm door gap
Overall depth of cavity
INDICATES PRODUCT DATUM
INDICATES MINIMUM CABINETRY CLEARANCES
IMPORTANT NOTE: The product dimensions and specifications apply at the date
of issue. Under our policy of continuous product improvement, these dimensions
and specifications may change at any time. Dimensions may vary by ±3/32
Please read the installation manual for detailed information on installing the
product or visit fisherpaykel.com.
72"
''.
7357_FP_2015-08-21
Loading...