Fiilex T360 Series, FLXT360, FLXT365 User Manual

T360 Series

FLXT360 FLXT365

User Manual

190103A2

General Notes

• The T360 Series has been designed for professional studio and location applications and may only

be operated by qualified persons.

• Please read the following operating instructions very carefully before using this fixture.

• For your own safety, please follow all safety instructions and warnings.

• Keep these operating instructions for future reference.

• For further information, contact Fiilex ([e-mail]) or your retailer.

Basic Operation (refer to Parts Diagram on following page)

• Mounting

T360 fixtures can be mounted to a Eutrac track system via its integrated Eutrac Multi-Adapter

(18). For more information on track components and how to mount the track, please visit
www.fiilex.com or call us at [phone].

• Powering On

The T360 Series comes with its own integrated Power Module Box (6). To supply a T360 Series

fixture with power, insert the Eutrac Multi-Adapter (18) into a Eutrac system. The fixture’s OLED
Display (17) will turn on once it is receiving power. The On/Off Button (13) can toggle the fixture’s
output on and off. Settings can still be adjusted while the switch is set to off.

• Adjusting the Position

Use the Yoke Knobs (2) to lock the fixture’s tilt position. Tighten the handle to secure.

• DMX Interface

Both fixtures are DMX512 compatible, allowing users to operate them remotely via the Fiilex

DMX Controller (or any standard DMX board).

Mode

Manual

DMX

On/Off

Button Color

Red/Green

Orange

Description

Directly adjust the light’s output via the control knobs. Press
the On/Off Button to toggle the fixture’s output on and off.

Red: Light output off - Settings are still adjustable
Green: Light output on

Control via DMX. Manual control knobs become disabled.
DMX Mode activates automatically when a signal is detected.

1