Fiilex Matrix II Turnable White, FLXMXG2 User Manual

Tunable White

190102A2

General Notes

• The Matrix II Tunable White has been designed for professional studio and location applications

and may only be operated by qualified persons.

• Please read the following operating instructions very carefully before using this fixture.

• For your own safety, please follow all safety instructions and warnings.

• Keep these operating instructions for future reference.

• For further information, contact Fiilex ([e-mail]) or your retailer.

Basic Operation

• Powering On

The Matrix II Tunable White power adapter includes an AC plug for power input and a 3-pin XLR
connector for output. To supply the fixture with power, insert the XLR connector into the Power
Input (19) and connect the AC plug into an active wall socket. The fixture’s OLED Display (9) will
turn on once it is receiving power. The On/Off Switch (12) can toggle the fixture’s output on and
off. Settings can still be adjusted while the switch is set to off.

• Mounting

The Matrix II Tunable White’s Baby/Junior Pin (5) can be mounted to baby or junior receivers.
Secure the fixture to pins with the Mount Tightening Knob (6). Remove the Mount Tightening
Knob when mounting to juinor receivers.

• Adjusting the Tilt

Use the Yoke Tightening Handle (8) to lock the fixture’s tilt position.

• DMX Interface

The Matrix II Tunable White receives DMX signals via its 5-pin XLR ports. When a DMX signal is
detected the fixture will automatically enter DMX Mode and all manual controls will be deacti­vated. To indicate DMX Mode, the OLED Display (9) will replace the word “LOCAL” with the
DMX address.

• DMX/RDM Support

The Matrix II Tunable White is compatible with DMX/RDM (Remote
Device Management) protocol. With RDM, the DMX address of the
fixture can be changed remotely via the DMX signal.

(refer to Parts Diagram on following page)

• USB Interface

The Matrix II Tunable White is equipped with a Mini USB Port (11) for updating firmware. The
standard USB Port (17) provides 5V 1A power for wireless DMX antennas. Please register your
product at www.fiilex.com to be informed when firmware updates are available.

Screen

Mode

Indicator

Manual

DMX

LOCAL

DMX

###

Description

Directly adjust the fixture’s output via control knobs. Use the
On/Off Switch to turn light on or off. Settings can still be adjust­ed while the switch is off.

Control via DMX. Manual control knobs become disabled. DMX
Mode activates automatically when signal is detected.