Fibocom Wireless L860GLD User Manual

FIBOCOM

L860-GL Hardware User Manual

Version：1.0.2

Update date：July 19rd, 2018

without

prior written permission of the copyright holder, any company or individual is prohibited to excerpt,

copy any part of or the entire document, or distribute the document in any form.

changes or modifications not expressly approved by the party resp

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide re

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radi

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

the user is encouraged to try to correct the interference by one or more of the

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user

follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be

located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is s

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

The document is subject to update from time t

otherwise specified, the document only serves as the user guide. All the statements, information and suggestions

contained in the document do not constitute any explicit or implicit guara

Rights

FIBOCOM

Copyright

Without the

Notice

authority to operate the equipment.

turning the equipment off and on,

following measures:

’ s

--

must

co-

L860-GL Hardware User Manual

Reproduction forbidden

Fibocom Wireless Inc. written authorization - All

ntee.

Reserved.

Page 2 of 53

without

This device is intended only for OEM integrators under the

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and the Max

allowed antenna gain is as following table

Host manufacturer is responsible for ensuring that the host continues to be compliant with the Part 15 subpart B

unintentional radiator requirements after the module is installed and operational.

responsible for ensuring that the host continues to be compliant with the Part 15

subpart B unintentional radiator requirements after the module is installed and operational.

Reproduction forbidden without Fibocom Wireless Inc. written authorization

GL Hardware User Manual Page 4 of 55

The document is subject to update from time to time owing to the product version upgrade or other

reasons. Unless otherwise specified, the document only serves as the user guide. All the st

information and suggestions contained in the document do not constitute any explicit or implicit guarantee.

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop

location with another t

Rights

FIBOCOM

Operating Band

WCDMA BAND II

WCDMA BAND IV

WCDMA BAND V

LTE BAND 2

LTE BAND 4

LTE BAND 5

LTE BAND 7

LTE BAND 12

LTE BAND 13

LTE BAND 14

LTE BAND 17

LTE BAND 25

LTE BAND 26（814-824）

LTE BAND 26（824-849）

LTE BAND 30

LTE BAND 38

LTE BAND 41

LTE BAND 66

showed:

Antenna Gain（dBi）

5

3

5

3

5

3

4

3

5

3

5

Host manufacturer is

FIBOCOM_L860-

configurations or co-

L860-GL Hardware User Manual

Reproduction forbidden

Fibocom Wireless Inc. written authorization - All

atements,

Reserved.

Page 3 of 53

without

valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator

evaluating the end product (including the transmitter) and obta

This transmitter module is authorized only for use in device where the antenna may be installed such that

20 cm may be maintained between the antenna and users. The final end product must be labeled

visible area with the following: “Contains FCC ID: ZMOL860GL

when all FCC compliance requirements are met.

Manual Information To the End User

The OEM integrator has to be aware not to provide information to the

or remove this RF module in the user’s manual of the end product which integrates this module. The end

user manual shall include all required regulatory information/warning as show in this manual.

Rights

”. The grantee's FCC ID can be used only

end user regarding how to install

FIBOCOM

will be responsible for re-

FCC authorization.

End Product Labeling

D

ining a separate

in a

L860-GL Hardware User Manual

Reproduction forbidden

Fibocom Wireless Inc. written authorization - All

Reserved.

Page 4 of 53

without

The trademark is registered and owned by Fibocom Wireless Inc.

Version Record

Remark

Draft version

Modify pin definition and

Modify module

Change tray package

Modify CA

And add RF performance parameters and power

Rights

consumption

FIBOCOM

Trademark

Version Update date

V1.0.0 2018-01-25

V1.0.1 2018-03-09

V1.0.2

2018-07-19

Applicability Table

No. Product model

1

L860-GL-01

1.

2.

3.

4.

timing

Combinations

Description

NA

type

description.

L860-GL Hardware User Manual

Reproduction forbidden

Fibocom Wireless Inc. written authorization - All

Reserved.

Page 5 of 53

without

................................

Application Framework

Diagram

................................

Consumption

................................

up Circuit

Timing Sequence

Module Shutdown

................................

PCIe Interface

................................

Interface Definition

USB2.0 Interface

Rights

................................

FIBOCOM

Contents

1 Foreword ................................

1.1

Introduction

1.2

Reference Standard

1.3

Related Documents

2 Overview ................................

2.1

Introduction

2.2

Specification

2.3

CA combinations

2.4

2.5

Hardware Block

2.6

Antenna Configuration

3 Application Interface

3.1

M.2 Interface

3.1.1

3.1.2

Pin Map

Pin Definition

................................................................

................................

................................................................

................................

................................................................

................................

.............................. 8

.......... 8

.............................. 8

............................. 9

.......... 9

........ 9

............................... 10

..................... 12

.................. 12

...................... 13

......... 14

...... 14

............................. 15

3.2

3.3

3.4

Power Supply

3.2.1

3.2.2

3.2.3

Control Signal

3.3.1

3.3.1.1 Start-

3.3.1.2 Start-up

3.3.2

3.3.3

3.3.4

PCIe & USB

3.4.1

3.4.1.1

3.4.1.2

Power Supply

Logic level

Power

Module Start-Up

Module Reset

PCIe Reset

PCIe Interface

................................................................

................................

................................................................

................................

................................................................

Definition ................................

Application ................................

................................................................

................................

..................................... 19

............................. 19

................................. 20

................... 21

.................................... 23

........................ 24

................... 24

................................... 24

...................... 25

............................. 26

................................. 27

...... 28

............................ 28

.................................... 28

.................................. 29

3.4.2

3.4.2.1 USB

3.4.2.2

L860-GL Hardware User Manual

Reproduction forbidden

USB Interface

................................

Application ................................

Fibocom Wireless Inc. written authorization - All

............................ 31

.................................... 31

............................. 31

Reserved.

Page 6 of 53

without

................................

USIM Interface Circuit

Card Slot

N.O. SIM Card

Plugging

................................

Interface

................................

Functionality

Characteristic

Dimension

................................

Receiver

................................

Rights

................................

FIBOCOM

3.5

USIM Interface

3.5.1

3.5.2

3.5.3

USIM1 Pins

USIM2 Pins

................................................................

................................

.................................. 32

............................... 32

.............. 33

3.5.3.1 N.C. SIM

3.5.3.2

3.5.4

USIM Hot-

3.5.5

USIM Design

3.6

Status Indicator

3.6.1

LED#1 Signal

3.7

Interrupt Control

3.7.1

W_DISABLE1#

3.7.2

BODYSAR

3.7.3

ANT_CONFIG

3.8

3.9

3.10

4 Radio Frequency

4.1

ANT Tunable Interface

Configuration

Other Interfaces

RF Interface

................................................................

Slot ................................................................

................................................................

................................

................................................................

................................

................................................................

............. 33

............ 33

................... 34

............................. 34

.................................. 35

............................ 35

................................ 36

......................... 36

................................ 36

.......................... 37

...................... 37

................................. 38

................ 39

....... 39

4.1.1

RF Interface

4.1.2

RF Connector

4.1.3

RF Connector

4.2

Operating Band

4.3

Transmitting Power

4.4

Receiver Sensitivity

4.4.1

4.4.2

4.5

GNSS

4.6

Antenna Design

5 Structure Specification

5.1

Product Appearance

5.2

Dimension of Structure

5.3

M.2 Interface Model

5.4

M.2 Connector

Dual Antenna

Four Antenna

................................................................

Sensitivity ................................

................................................................

................................

................................................................

................................

......... 39

...... 39

.......... 39

.................................. 41

............................ 42

........................... 43

............................ 43

............................ 44

................. 45

.................................. 46

....... 49

........................... 49

...................... 49

.......................... 50

................................... 50

Reproduction forbidden

L860-GL Hardware User Manual

Fibocom Wireless Inc. written authorization - All

Reserved.

Page 7 of 53

without

................................

Rights

................................

FIBOCOM

5.5

5.6

5.5.1

5.6.1

5.6.2

Storage

Packing

Storage Life

Tray Package

Tray size

................................................................

................................

................................................................

................................

................................................................

............... 51

............................... 51

.............. 51

.............................. 51

..................................... 53

Reproduction forbidden

L860-GL Hardware User Manual

Fibocom Wireless Inc. written authorization - All

Reserved.

Page 8 of 53

without

The document describes the electrical characteristics, RF performance, dimensions and application environment,

GL (hereinafter referred to as L860). With the assistance of the document and other instr

developers can quickly understand the hardware functions of L860 modules and develop

Standard

The design of the product complies with the following standards:

reception (FDD);Part 1: Conformance

Technical

1 V13.4.0: User Equipment (UE)

reception; Part 1: Conformance

USIM

Specification

Characteristics

Universal

Electro

AT

Use

DCE) interface for Short Message

PCI Express M.2 Specification

Documents

Application Design Specification

Family System Driver Integration and Application

Manual

Rights

products.

Radio

Network;

specification; Radio transmission and

Mobile

Module

Application

terminating

(CBS)

FIBOCOM

1 Foreword

1.1 Introduction

etc. of L860-

1.2 Reference

 3GPP TS 34.121-1 V8.11.0:

 3GPP TS 34.122 V11.13.0:

and reception (TDD)

 3GPP TS 36.521-

 3GPP TS 21.111 V10.0.0:

 3GPP TS 51.011 V4.15.0:

interface

 3GPP TS 31.102 V10.11.0:

application

User Equipment (UE) conformance specification;

specification

Specification Group Radio Access

testing

and IC card requirements

of the Subscriber Identity Module -

of the Universal Subscriber Identity

conformance

uctions, the

transmission and

Radio transmission

Equipment (SIM-ME)

(USIM)

 3GPP TS 31.11 V10.16.0:

 3GPP TS 36.124 V10.3.0:

ancillary equipment

 3GPP TS 27.007 V10.0.8:

 3GPP TS 27.005 V10.0.1:



1.3 Related

 RF Antenna

 L8-

 L8-Family AT Commands

L860-GL Hardware User Manual

Reproduction forbidden

Subscriber Identity Module (USIM)

Magnetic Compatibility (EMC) requirements

command set for User Equipment (UE)

of Data Terminal Equipment - Data Circuit

Service (SMS) and Cell Broadcast Service

Rev1.1

Fibocom Wireless Inc. written authorization - All

Toolkit(USAT)

for mobile terminals and

Equipment (DTE -

Guidance

Reserved.

Page 9 of 53

without

L860 is a highly integrated 4G WWAN module which uses M.2 form factor interface. It supports LTE FDD/LTE

TDD/WCDMA systems and can be applied to most cellular networks of mobile carrier in the world.

LTE FDD: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 21, 25, 26, 28, 29, 30, 32, 66

LTE TDD: Band 38, 39, 40, 41, 42

LAA Band 46 Receiver only

WCDMA/HSPA+: Band 1, 2, 4, 5, 8

GNSS/Beidou: support

4.8V, Typical 3.3V

Normal operating temperature:

Extended operating temperature:

Storage temperature:

-

30 x 42 x 2.3mm

Weight: About 6.2 g

WWAN Antenna x 4

Support 4x4 MIMO

Dual SIM, 3V/1.8V

Rights

HSPA+:42 Mbps DL(Cat 24)/5.76 Mbps UL(Cat6)

FIBOCOM

2 Overview

2.1 Introduction

2.2 Specification

Specification

Operating Band

Data

Transmission

Carrier

aggregation

LTE

UMTS/HSPA+

5CA Downlink

1 Gbps DL/75 Mbps UL(Cat 16)

UMTS:384 kbps DL/384 kbps UL

DC-

Power Supply

Temperature

Physical

characteristics

Interface

Antenna

Connector

Function

Interface

L860-GL Hardware User Manual

Reproduction forbidden

DC 3.135V～

Interface: M.2 Key

Dimension

PCIe 2.0 X1

USB 2.0

：

-10°C ～+55°C

-20°C ～+65°C

-40°C ～+85°C

B

Fibocom Wireless Inc. written authorization - All

Reserved.

Page 10 of

without

3GPP TS 27.007 and 27.005

Windows MBIM support

When temperature goes beyond normal operating temperature range of

module may be slightly off 3GPP

and 13 can support temperature ranging from

Rights

10°C~+55°C, RF performance of

1+3, 5, 7, 8, 18, 19, 20, 26, 28, 38, 41, 42, 46

FIBOCOM

Specification

Software

Protocol Stack

AT commands

Firmware update PCIe

Other feature

USB 3.0(Reserved)

W_Disable#

Body Sar

LED

Tunable antenna

I2S(Reserved)

IPV4/IPV6

Multiple carrier

Windows update

AGNSS

Note:

2.3 CA combinations

DL CA Combinations

2CA

L860-GL Hardware User Manual

Inter-band

Reproduction forbidden

-20℃ to +60℃.

2+4, 5, 12, 13, 14, 29, 30, 46, 66 3+5, 7, 8, 19, 20, 28, 32, 38, 40, 41, 46 4+5, 12, 13, 29, 30, 46 5+7, 30, 46, 66 7+8, 20, 28, 32, 46 12+30, 66 13+46, 66 14+30, 66 19+21, 42 20+32 21+42 25+26, 41, 46 26+41 29+30, 66

Fibocom Wireless Inc. written authorization - All

-

Reserved.

Page 10 of 53

without

contiguous) plus

band(contiguous) plus

contiguous) plus

band(contiguous) plus

contiguous)

band(contiguous) plus

band(contiguous) plus 2

band(contiguous) plus

Rights

1+3+5, 1+3+7, 1+3+8, 1+3+19, 1+3+20, 1+3+28, 1+3+38,

1+41+42

2+4+5, 2+4+12, 2+4+13, 2+5+30, 2+12+30, 2+29+30, 2+5+66, 2+13+66, 2+14+30, 2+14+66, 2+30+66, 2+5+46, 3+5+7, 3+7+8, 3+7+20, 3+7+28, 3+7+32, 3+20+32

13+46+66, 14+30+66, 29+30+66

2+2+5, 2+2+12, 2+2+13, 2+2+30, 2+2+66, 2+4+4, 2+46+46, 3+7+7, 4+4+5, 4+4+12, 4+4+13, 4+46+46, 5+66+66

12+66+66, 13+66+66, 66+46+46, 29+66+66, 30+66+66

1+3+3, 1+7+7, 1+40+40, 1+41+41, 1+42+42

3+3+5, 3+3+7, 3+3+20, 3+3+28, 3+3+32, 3+7+7, 3+40+40, 4+46+46, 5+5+30, 5+5+66, 5+46+46, 5+66+66, 7+7+28

19+42+42, 25+41+41, 26+41+41,

28+40+40, 41+42+42, 41+41+42, 46+46+66

1+3+5+7, 1+3+7+8, 1+3+7+20, 1+3+7+28

2+2+5+66, 2+2+12+30, 2+2+12+66, 2+2+13+66, 2+5+66+66, 2+12+66+66, 2+13+66+66, 5+30+66+66, 29+30+66+66

1+3+3+5, 1+3+3+7, 1+3+3+20, 1+3+7+7, 1+7+7+28,

2+5+5+30, 2+5+5+66, 2+5+46+46, 2+13+46+46, 2+46+46+46, 2+46+46+66, 2+5+66+66, 2+13+66+66

3+3+7+20, 3+3+7+28, 3+3+7+32, 3+7+7+28, 3+28+40+40, 4+46+46+46, 5+5+30+66, 5+46+46+66, 13+46+46+66,

2+46+46+46, 3+40+40+40, 4+46+46+46, 5+46+46+46, 13+46+46+46, 25+41+41+41, 28+40+40+40, 66+46+46+46

1+3+3+7+7, 3+3+7+7+28, 2+46+46+46+46,

FIBOCOM

DL CA Combinations

Intra-band(non-contiguous) Intra-band(contiguous)

3CA

4CA

Inter-band

2 intra-band(noninter-band

2 intrainter-band

Intra-band(non-contiguous) Intra-band(contiguous)

Inter-band

2 intra-band(non2 inter-band

2 intra2 inter-band

2 intra2 intra-band(contiguous)

2 intra2 intra-band(non-

3 intrainter-band

30+66 41+42, 46 46+66 1, 2, 3, 4, 7, 25, 41, 66 1, 2, 3, 5, 7, 40, 41, 42, 66

1+5+7, 1+7+8, 1+7+20, 1+7+28,

2+13+46, 2+46+66, 2+12+66

4+5+30, 4+12+30, 4+29+30 5+30+66, 5+46+66 7+20+32, 12+30+66,

2+66+66

2+5+5, 2+46+46, 2+66+66

3+41+41, 3+3+41

13+46+46, 13+66+66,

41, 66 40, 41

2+5+30+66, 2+12+30+66, 2+14+30+66 3+7+20+32

1+3+40+40, 1+19+42+42

66+46+46+46

3+3+7+7, 41+41+42+42

5+5+66+66

Intra-band(non-contiguous)

Intra-band(contiguous)

5CA

L860-GL Hardware User Manual

2 intraintrainter-band

Reproduction forbidden

Fibocom Wireless Inc. written authorization - All

41

40

46+46+46+46+66

Reserved.

Page 11 of 53

without

band(contiguous) plus 3

plus 2

contiguous) plus

band(contiguous) plus 2

band(contiguous) plus 2 band(contiguous) plus

Framework

The peripheral applications for L860 module are shown in Figure 2

Diagram

The hardware block diagram in Figure 2

Rights

1+3+3+7+20, 1+3+7+7+28, 2+5+5+30+66

2+5+46+46+46, 2+13+46+46+46, 2+46+46+46+46,

3+28+40+40+40, 4+46+46+46+46,

5+46+46+46+66, 13+46+46+46+66, 46+46+46+46+66

2+46+46+46+46, 3+40+40+40+40, 5+46+46+46+46,

hardware functions of L860 module, including base

FIBOCOM

DL CA Combinations

2 intrainter-band

2 intra-band(contiguous) intra-band(noninter-band

2+5+5+66+66

3 intraintra-band(non-contiguous)

3 intrainter-band

3 intraintra-band(non-contiguous)

4 intrainter-band

Intra-band(non-contiguous)

2.4 Application

2+2+46+46+46

2+46+46+46+66,

46+46+46+66+66

13+46+46+46+46, 46+46+46+46+66

41

-1:

2.5 Hardware Block

band and RF functions.

Baseband contains the followings:

L860-GL Hardware User Manual

Reproduction forbidden

Figure2-1 Application Framework

-2 shows the main

Fibocom Wireless Inc. written authorization - All

Reserved.

Page 12 of 53

without

GSM/UMTS/LTE FDD controller/Power

RAM

Configuration

L860 module support four antennas and the configuration is as below table:

Function Description

MIMO1 ANT

MIMO2 ANT

Diversity & GNSS ANT

Rights

All supported bands transmit & receive

4x4 MIMO supported bands receive

All supported bands and GNSS receive

FIBOCOM



supply

 NAND/internal LPDDR4

 Application interface

RF contains the followings:

 RF Transceiver

 RF Power/PA

 RF Front end

 RF Filter

 Antenna Connector

Figure 2-2 Hardware Block Diagram

2.6 Antenna

Antenna Connector

M

M1

M2

D/G

L860-GL Hardware User Manual

Reproduction forbidden

Main ANT

Fibocom Wireless Inc. written authorization - All

Band configuration

Reserved.

Page 13 of 53

without

Interface

The L860 module applies standard M.2 Key

Pin “Notch” represents the gap of the gold fingers.

Rights

FIBOCOM

3 Application

3.1 M.2 Interface

3.1.1 Pin Map

-B interface, with a total of 75 pins.

Note:

L860-GL Hardware User Manual

Reproduction forbidden

Figure 3-1 Pin Map

Fibocom Wireless Inc. written authorization - All

Reserved.

Page 14 of 53

without

Reset Value

Rights

NC, L860 M.2 module is configured as the

PCIe, USB3.0 interface type

Power enable, Module power on input,

System status LED, Output open drain,

NC, L860 M.2 module is configured as the

PCIe, USB3.0 interface type

FIBOCOM

3.1.2 Pin Definition

The pin definition is as follows:

Pin Pin Name I/O

1

CONFIG_3

2

+3.3V PI

3

GND

4

+3.3V PI

5

GND

FULL_CARD_

6

POWER_OFF#

7

USB D+ I/O

8

W_DISABLE1# I

9

USB D- I/O

10 LED1#

O

-

I

OD T

Pin Description

NC

-

PU

PD

WWAN –

Power input

GND

Power input

GND

internal pull up

USB Data Plus

WWAN Disable, active low

USB Data Minus

CMOS 3.3V

Type

Power Supply

CMOS

3.3/1.8V

0.3---3V

CMOS

3.3/1.8V

0.3---3V

CMOS 3.3V

11 GND

12 Notch

13 Notch

14 Notch

15 Notch

16 Notch

17 Notch

18 Notch

19 Notch

20 I2S_CLK

21 CONFIG_0

22 I2S_RX

-

O

PD

I

-

NC

PD

GND

Notch

I2S Serial clock, Reserved

WWAN –

I2S Serial receive data,

Reserved

Power Supply

CMOS 1.8V

23 WOWWAN#

24 I2S_TX

L860-GL Hardware User Manual

Reproduction forbidden

O

PD

Wake up host, Reserved

I2S Serial transmit data, Reserved

Fibocom Wireless Inc. written authorization - All

CMOS 1.8V

Reserved.

Page 15 of 53

without

Reset Value

Rights

I2S Word alignment/select, Reserved

USB3.0 Transmit data minus, Reserved

USB3.0 Transmit data plus, Reserved

USB3.0 receive data minus, Reserved

SIM2 Detect, internal pull up(390KΩ),

PCIe TX Differential signals Positive

PCIe RX Differential signals Positive

Asserted to reset module PCIe interface

default. If module went into core dump, it

FIBOCOM

Pin Pin Name I/O

25 DPR

26 W_DISABLE2# I

27 GND

28 I2S_WA

29 USB3.0_TX-

30 UIM_RESET

31 USB3.0_TX+

32 UIM_CLK

33 GND

34 UIM_DATA I/O

35 USB3.0_RX-

I

-

O

-

I

Pin Description

PD

-

PD

L

-

L

Body SAR Detect, active low

GNSS disable, active low, Reserved

GND

CMOS 1.8V

SIM reset signal

SIM clock Signal

GND

SIM data input/output

Type

CMOS

3.3/1.8V

CMOS

3.3/1.8V

Power Supply

1.8V/3V

Power Supply

1.8V/3V

36 UIM_PWR

37 USB3.0_RX+

38 NC

39 GND

40 SIM2_DETECT I

41 PETn0

42 UIM2_DATA I/O

43 PETp0

44 UIM2_CLK

45 GND

46 UIM2_RESET

47 PERn0

48 UIM2_PWR

O

I

-

O

-

O

I

O

-

PD

L

-

L

SIM power supply, 3V/1.8V

USB3.0 receive data plus, Reserved

NC

GND

active high

PCIe TX Differential signals

Negative

SIM2 data input/output

SIM2 clock Signal

GND

SIM2 reset signal

PCIe RX Differential signals

Negative

SIM2 power supply, 3V/1.8V

1.8V/3V

Power Supply

CMOS 1.8V

1.8V/3V

Power Supply

1.8V/3V

49 PERp0

50 PERST#

L860-GL Hardware User Manual

Reproduction forbidden

I

PU

Fibocom Wireless Inc. written authorization - All

Reserved.

CMOS 3.3V

Page 16 of 53

Fibocom Wireless L860GLD User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 Foreword

1.1 Introduction

2 Overview

2.1 Introduction

2.2 Specification

2.3 CA combinations

3.1 M.2 Interface

3.1.1 Pin Map

Note:

3.1.2 Pin Definition