USER MANUAL
FOR
FORmiDable
mOByDic 3210 Series
SOFTWARE INSTALLATION
1- Copy on your computer the Software CD provided with device.
2- You should adjust the screen resolution of your computer to 1024x768 or 800x600 pixel to be able to view
the FORmiDable Program on the computer screen perfectly.
3- To build up the connection between your computer and FORmiDable, you need to use RS232 or USB cable
4- The FORmiDable Software is programmed for the “Com 1” Port.
LEGEND OF SENSOR ABBREVIATIONS
RPM
Rotation per Minute
BAT Battery
FRP Fuel Rail Pressure CPP Clutch Pedal Position
MAP Manifold Air Pressure BPP Brake Pedal Position
EGRp EGR Position A/C Air Condition
EGRd EGR Duty Circle VSS Vehicle Speed Sensor
MFdes Measured Fuel CHT Cylinder Heat Temperature
BARO Barometer Sensor FTS Fuel Temperature Sensor
APP1 Absolute Pedal Position 1 IAT Intake Air Temperature
APP2 Absolute Pedal Position 2 BET Battery Electrod Temperature
APP3 Absolute Pedal Position 3 DTC Diagnostic Trouble Code
RUNNING OF SOFTWARE PROGRAM
1- Click “OK” in order to by-pass the opening screen and start applications.
2- When first running the program, a screen will appear enabling you to make the necessary settings for
connecting the device to your computer and language selection. Click “OK” after selecting the COM PORT and
the LANGUAGE to be used.
3- Select the model of your vehicle and click “OK” button below. A list of gas driven vehicles are displayed at the
top of the screen and diesel driven below. No need to select the date of production of the vehicle, since
FORmiDable will detect that date automatically according to your selection.
4- Connect the mOByDic 3210 to your vehicle, switch on the engine and click “OK” key.
After communicating, FORmiDable will connect to your vehicle.
Loading...