Fiat Doblo Panorama 2017 Owner's Manual

OWNER HANDBOOK

FIATDOBLÓ

Dear Customer,

We would like to congratulate and thank you for choosing a Fiat Doblò.

We have written this handbook to help you get to know all the features of your vehicle and use it in the best possible way.

Here you will find information, advice and important warnings regarding use of your vehicle and how to achieve the best performance from the technical features of your Fiat Doblò.

You are advised to read it right through before taking to the road for the first time, to become familiar with the controls and above all with those concerning brakes, steering and gearbox; at the same time, you can understand the vehicle behaviour on different road surfaces.

This document also provides a description of special features and tips, as well as essential information for the safe driving, care and maintenance of your Fiat Doblò over time.

After reading it, you are advised to keep the handbook inside the vehicle, for an easy reference and for making sure it remains on board the vehicle should it be sold.

In the attached Warranty Booklet you will also find a description of the Services that Fiat offers to its customers, the Warranty Certificate and the detail of the terms and conditions for maintaining its validity.

We are sure that these will help you to get in touch with and appreciate your new vehicle and the service provided by the people at Fiat.

Enjoy reading. Happy motoring!

VERY IMPORTANT

REFUELLING

Petrol engines: only refuel with unleaded petrol with octane rating (RON) not less than 95 in compliance with the European specification

EN228. Diesel engines: only refuel with diesel fuel conforming to the European specification EN590. The use of other products or mixtures may damage the engine beyond repair and consequently invalidate the warranty, due to the damage caused.

STARTING THE ENGINE

Petrol engines: make sure that the handbrake is engaged; set the gear lever to neutral; fully depress the clutch pedal without pressing the

accelerator, then turn the ignition key to AVV and release it as soon as the engine has started. Diesel engines: turn the ignition key to MAR and wait for the

PARKING ON FLAMMABLE MATERIAL

The catalytic converter develops high temperatures during operation. Do not park on grass, dry leaves, pine needles or other flammable material: fire hazard.

RESPECTING THE ENVIRONMENT

The vehicle is fitted with a system that allows continuous diagnosis of the emission-related components in order to help protect the environment.

ELECTRICAL ACCESSORIES

If, after buying the vehicle, you decide to add electrical accessories (with the risk of gradually draining the battery), visit a Fiat Dealership. They can calculate the overall electrical requirement and check that the vehicle's electrical system can support the required load.

SCHEDULED SERVICING

Correct maintenance enables the vehicle to perfectly maintain performance and safety characteristics, its environmental friendliness and low running costs over time.

and warning lights to switch off. Then turn the ignition key to AVV and release it as soon as the engine has started.

USE OF THE OWNER HANDBOOK

OPERATING INSTRUCTIONS

Each time direction instructions (left/right or forwards/backwards) about the vehicle are given, these must be intended as regarding an occupant in the driver's seat. Special cases not complying with this rule will be specified as appropriate in the text. The figures in the Owner Handbook are provided by way of example only: this might imply that some details of the image do not correspond to the actual arrangement of your vehicle. In addition, the Handbook has been conceived considering vehicles with steering wheel on the left side; it is therefore possible that on vehicles with steering wheel on the right side, the position or construction of some controls is not exactly mirror-like with respect to the figure. To identify the chapter with the information needed you can consult the index at the end of this Owner Handbook. Chapters can be rapidly identified with dedicated graphic tabs, at the side of each odd page. A few pages further there is a key for getting to know the chapter order and the relevant symbols in the tabs. There is in any case a textual indication of the current chapter at the side of each even page.

WARNINGS AND PRECAUTIONS

While reading this Owner Handbook you will find a series of WARNINGS to prevent procedures that could damage your vehicle. There are also PRECAUTIONS that must be carefully followed to prevent incorrect use of the components of the vehicle, which could cause accidents or injuries. Therefore all WARNINGS and PRECAUTIONS must always be carefully followed. WARNINGS and PRECAUTIONS are recalled in the text with the following symbols:

personal safety;

vehicle integrity;

environmental protection.

NOTE These symbols, when necessary, are indicated besides the title or at the end of the line and are followed by a number. That number recalls the corresponding warning at the end of the relevant section.

IMPORTANT

This Owner Handbook describes all Fiat Doblò versions. Options, equipment dedicated to specific markets or versions are not explicitly indicated in the text: as a consequence, you should only consider the information which is related to the trim level, engine and version that you have purchased. Any content introduced throughout the production of the model, outside the explicit request of options at the time of purchase, will be identified with the wording (for versions/markets, where provided). All data contained in this publication are intended to help you use your vehicle in the best possible way. Fiat aims at a constant improvement of the vehicles produced. For this reason it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact a Fiat Dealership.

SYMBOLS

Some vehicle components have coloured labels whose symbols indicate precautions to be observed when using this component. A plate summarising these symbols can also be found under the bonnet.

VEHICLE MODIFICATIONS / ALTERATIONS

IMPORTANT

Any change or alteration of the vehicle might seriously affect its safety and road holding, thus causing accidents, in which the occupants could even be fatally injured.

ACCESSORIES PURCHASED BY THE OWNER

If after buying the vehicle, you decide to install electrical accessories that require a permanent electrical supply (e.g. radio, satellite anti-theft system, etc.) or accessories that in any case burden the electrical supply, contact a Fiat Dealership, whose personnel will check whether the vehicles's electrical system is able to withstand the load required, or whether it needs to be integrated with a more powerful battery.

IMPORTANT Take care when fitting additional spoilers, alloy wheels or non-standard wheel hubs: they could reduce the ventilation of the brakes and affect efficiency under sharp, repeated braking or on long descents. Make sure that nothing obstructs the pedal stroke (mats, etc.).

INSTALLING ELECTRICAL/ELECTRONIC DEVICES

Electrical and electronic devices installed after buying the vehicle and available as after-sales must carry the following label

. Fiat authorises the installation of transceivers provided that installation is carried out at a specialised centre, in a workmanlike fashion and in compliance with manufacturer's specifications.

IMPORTANT Traffic authorities may not allow the vehicle on the road if devices are fitted that involve modifications to the features of the vehicle. This may also cause lapse of the warranty in relation to faults caused by the change or either directly or indirectly related to it. Fiat shall not be liable for damage caused by the installation of accessories either not supplied or recommended by Fiat and/or not installed in compliance with the provided instructions.

RADIO TRANSMITTERS AND MOBILE PHONES

Radio transmitters (car phones, CB radios etc.) cannot be used inside the vehicle unless a separate aerial is mounted externally.

Transmission and reception of these devices may be affected by the shielding effect of the vehicle body. As far as the use of EC-approved mobile phones is concerned (GSM, GPRS, UMTS, LTE), follow the usage instructions provided by the mobile phone Manufacturer. IMPORTANT The use of such devices inside the passenger compartment (without an external aerial) may, in addition to potential damage to the health of the passengers, cause malfunctions in the vehicle’s electronic systems, compromising the safety of the vehicle.

GRAPHICAL INDEX

KNOWING YOUR CAR

KNOWING THE INSTRUMENT PANEL

SAFETY

STARTING AND DRIVING

IN AN EMERGENCY

SERVICING AND CARE

TECHNICAL DATA

INDEX

GRAPHICAL INDEX

HEADLIGHTS

Types of bulbs ...........................144

Daytime running lights ............... 32

Side lights/dipped headlights ..... 32

Main beam headlights ............... 32

Bulb replacement ......................144

WHEELS

Rims and tyres ..........................210

Tyre pressure .............................213

Changing a wheel ......................158

Fix&Go tyre repair kit .................162

DOOR MIRRORS

Adjustment ................................ 31

Folding ...................................... 31

F0V0539

DOORS

Central opening/closing ............. 18

WINDSCREEN WIPERS

Operation .................................. 37

Blade replacement ....................192

ENGINE

Engine compartment .................179

Technical specifications .............204

GRAPHICAL INDEX

REAR LIGHTS

Types of bulbs ...........................144

Bulb replacement ......................148

LOAD COMPARTMENT

Opening/closing ........................ 20

THIRD BRAKE LIGHT

Types of bulbs ...........................144

Bulb replacement ......................149

F0V0540

PARKING SENSORS

Operation ..................................136

LUGGAGE CARRIER

Setup ........................................ 63

Longitudinal roof bars ................ 63

AIR VENTS

Diffusers .................................... 40

LEFT STALK

External lights ............................ 32

INSTRUMENT PANEL

Control panel and on-board

instruments .................................... 68

Warning lights ............................ 83

RIGHT STALK

Window washing ....................... 37

RADIO

System ...................................... 65

PASSENGER SIDE FRONT AIRBAG

Front airbag ...............................117

GLOVE COMPARTMENT

Interior fittings ............................ 60

DASHBOARD CONTROLS

Operation .................................. 54

HEATER / CLIMATE CONTROL

SYSTEM

Heating and ventilation .............. 41

Manual climate control ............... 44

F0V0538

Automatic climate control

system ........................................... 47

GEAR LEVER

Operation ..................................126

STEERING WHEEL

Adjustment ................................ 30

Front airbag driver's side ...........117

GRAPHICAL INDEX

BONNET OPENING LEVER

Opening/closing ........................ 55

STEERING WHEEL ADJUSTMENT

UNLOCKING LEVER

Operation .................................. 30

DOORS

Lock/Unlock .............................. 18

F0V0541

SEATS

Adjustments .............................. 22

Driver seat adjustments ............. 22

Passenger seat adjustments ...... 23

Rear seat access ....................... 24

Seat that folds to form a table ... 24

Third row seats .......................... 25

KNOWING YOUR CAR

In-depth knowledge of your new vehicle starts here.

The booklet that you are reading simply and directly explains how it is made and how it works.

That’s why we advise you to read it seated comfortably on board, so that you can see what is described here for yourself.

THE KEYS....................................... 14

IGNITION DEVICE ........................... 16

SYMBOLS ...................................... 17

THE FIAT CODE SYSTEM ............... 17

DOORS........................................... 18

SEATS ............................................ 22

PARTITIONS ................................... 27

HEAD RESTRAINTS........................ 29

STEERING WHEEL ......................... 30

REAR VIEW MIRRORS.................... 31

EXTERNAL LIGHTS......................... 32

INTERIOR LIGHTS .......................... 34

WINDSCREEN/REAR WINDOW

WIPER ............................................ 37

HEATING AND VENTILATION

SYSTEM ......................................... 39

DIFFUSERS..................................... 40

HEATING AND VENTILATION.......... 41

MANUAL CLIMATE CONTROL

SYSTEM ......................................... 44

AUTOMATIC CLIMATE CONTROL

SYSTEM ......................................... 47

ELECTRIC WINDOWS .................... 52

CONTROLS .................................... 54

BONNET......................................... 55

BOOT ............................................. 56

INTERIOR FITTINGS ....................... 60

ROOF RACK/SKI RACK.................. 63

HEADLIGHTS.................................. 64

RADIO............................................. 65

PROTECTING THE

ENVIRONMENT .............................. 65

THE KEYS

KEY WITHOUT REMOTE CONTROL

The metal insert A fig. 5 of the key is fixed. The key operates:

the ignition device; the door lock; opening and closing of the fuel tank

cap.

KNOWING YOUR CAR

F0V0003

KEY WITH REMOTE CONTROL

The metal insert A fig.6-fig.7is retractable and it operates:

the ignition device; the door lock; opening and closing of the fuel tank

cap. To extract the metal insert, press button B fig. 6 - fig. 7. To refit it in the grip proceed as follows:

hold down button B and turn the

metal insert A;

release button B and turn the metal

insert A completely until the locking click is heard to ensure correct closure.

6 - Cargo versions

F0V0004

7 - Combi/Panorama versions

F0V0536

Cargo versions fig. 6

The

button unlocks the front doors (including the boot, the rear swing doors and the sliding side doors for versions/markets where provided). Button

is used for locking all the doors. The

button unlocks the boot, the rear swing doors and the sliding side doors (depending on the version).

Combi/Panorama versions fig. 7

button unlocks the front doors

The (including the boot, the rear swing doors and the sliding side doors for versions/markets where provided). Button

is used for locking all the doors. The

button unlocks the boot, the rear swing doors and the sliding side doors (depending on the version).

Changing battery - key with remote control

To replace the remote control battery, proceed as follows fig. 8:

press button A and open the metal

insert B;

turn the screw C to using a fine

bit screwdriver;

take out the battery case D and replace the battery E making sure that polarities are correct;

refit the battery case D inside the key and lock it turning the screw C to

F0V0005

Request for additional remote controls

The system can recognise up to 8 keys with incorporated remote control. Should a new remote control be necessary, contact a Fiat Dealership and be ready to present the CODE card, a personal identity document and the vehicle ownership documents.

Unlocking the load compartment from inside the vehicle (Cargo versions)

Pressing button A fig. 9 unlocks the load compartment (rear swing doors/tailgate and sliding side doors) from inside the vehicle. If the LED is on, the loading area is locked.

F0V0022

DEAD LOCK

(for versions/markets, where provided)

This security device prevents the opening of the doors from inside the passenger compartment if there has been a break-in attempt (e.g. a window has been broken). The dead lock device therefore offers the best possible protection against break-in attempts. We recommend engaging it whenever the vehicle is parked and left unattended.

Activating the device

The system is automatically enabled on all the doors by pressing button

twice on the key with remote control. The direction indicators flash twice to let you know that the device is active. If one or more of the doors is not perfectly shut, the dead lock device will not be activated, thus preventing a person getting into the vehicle through the open door and, on shutting, it, remaining stuck inside the passenger compartment.

Deactivating the device

The system is disabled automatically on every door when:

unlocking the doors; by turning the ignition key to the

MAR position.

2) 3)

WARNING

1) Press button B only with the key away

from your body, specifically from your eyes and from objects which could get damaged (e.g. your clothes). Do not leave the key unattended to prevent people, especially children, from inadvertently pressing the button.

2) Once the dead lock system is engaged it is impossible to open the doors from

KNOWING YOUR CAR

inside the vehicle. Therefore, before engaging the system check that there is no one left inside.

3) If the remote control battery is flat, the system can only be turned on by inserting the metal key in the door lock: in this case, the device remains active for the rear doors only.

WARNING

1) Used batteries are harmful to the

environment. You can dispose of them either in the correct containers as specified by law or by taking them to a Fiat Dealership, which will deal with their disposal.

IGNITION DEVICE

The key can be turned to 3 different positions fig. 10:

STOP: engine off, key extractable, steering locked. Some electrical devices (e.g. sound system, central door locking system, etc.) can operate;

MAR: driving position. All electrical devices are enabled;

AVV: engine starting (unstable position).

The ignition switch is fitted with an electronic safety system that requires the ignition key to be turned back to STOP if the engine will not start, before the starting operation can be repeated.

4) 5) 6) 7)

F0V0006

STEERING LOCK

Activation

When the key is at STOP, remove the key and turn the steering wheel until it locks.

Deactivation

Move the steering wheel slightly as you turn the ignition key to MAR.

WARNING

4) If the ignition device has been tampered

with (e.g. an attempted theft), have it checked over by a Fiat Dealership before driving again.

5) Always remove the key when you leave your vehicle to prevent someone from accidentally operating the controls. Remember to engage the handbrake. Engage first gear if the vehicle is parked uphill or reverse gear if the vehicle is parked downhill. Never leave children unattended in the vehicle.

6) Never extract the key while the vehicle is moving. The steering wheel will automatically lock as soon as it is turned. This also applies to cases in which the vehicle is towed.

7) It is absolutely forbidden to carry out any after-market operation involving steering system or steering column modifications (e.g.: installation of anti-theft device) that could badly affect performance and safety, cause the lapse of warranty and also result in non-compliance of the vehicle with type approval requirements.

SYMBOLS

Some vehicle components have coloured labels whose symbols indicate precautions to be observed when using this component. Under the bonnet there is also a label that summarises all the symbols.

THE FIAT CODE SYSTEM

IN BRIEF

This is an electrical engine locking system which increases protection against attempted theft of the vehicle. It is automatically activated when the ignition key is removed.

Each key contains an electronic device which modulates the signal emitted during ignition by an antenna built into the ignition device. The signal, which changes each time the engine is started, is the “password”, by means of which the control unit recognises the key and enables starting.

Operation

Each time the vehicle is started turning the ignition key to MAR, the Fiat CODE system control unit sends a recognition code to the Powertrain Control Module to deactivate the inhibitor. The acknowledgement code is sent only if the Fiat CODE system control unit has recognised the code transmitted from the key.

Each time the ignition key is turned to STOP, the Fiat CODE system deactivates the functions of the Powertrain Control Module.

Irregular operation

If, during starting, the code has not been recognised correctly the warning light on accompanied by the related message on the display (see section “Warning lights and messages”). In this case, turn the key to STOP and

KNOWING YOUR CAR

then back to MAR; if the lock continues, try with the other keys provided with the vehicle. Contact a Fiat Dealership if you still cannot start the engine.

IMPORTANT Each key has its own code which must be stored by the system's control unit. Contact a Fiat Dealership to have new keys (up to 8) stored with a code.

on the instrument panel turns

Activation of light while driving

If the warning light switches on, this means that the system is running a self-diagnosis (for example due to a voltage drop).

If the warning light stays on, contact a Fiat Dealership.

WARNING

1) The electronic components inside the

key may be damaged if the key is subjected to strong shocks. In order to ensure complete efficiency of the electronic devices inside the key, it should never be exposed to direct sunlight.

warning

DOORS

DOOR CENTRAL LOCKING/UNLOCKING

Locking doors from the outside

The doors will only be locked if all doors are shut. If one or more of the doors is open after button the remote control, the direction indicators will flash quickly for around three seconds. You can lock all the doors by turning the key clockwise in the driver's door. Pressing button control twice in quick succession activates the dead lock device (see "Dead lock").

Door unlocking from the outside

Press the unlock only the front doors (Cargo version), to turn on the front ceiling lights for a limited period and to double flash the direction indicators. Press the unlock the load compartment (Cargo version), to turn on the rear ceiling lights for a limited period and to double flash the direction indicators. Turn the key anticlockwise in the driver's door to unlock the front doors only.

is pressed on

on the remote

button shortly to remotely

Press the button briefly to unlock all the doors (Doblò/Doblò Combi version), switch on the roof lights temporarily and double-flash the direction indicators. Turn the key anticlockwise in the driver's door to unlock all the doors.

F0V0046

Unlocking the load compartment from inside the vehicle (Cargo version)

Press button A fig. 12 (Cargo version) to unlock the load compartment (rear swing doors/tailgate and sliding side doors) from inside the vehicle. If the LED is on, the loading area is locked.

F0V0022

SLIDING SIDE DOORS

(for versions/markets, where provided)

On Cargo versions, the sliding side door is fitted with a spring-loaded latch that stops the door from opening any further. To lock it, simply push the door as far as it will go; to unlock it, pull forward firmly. In any case, make sure that the door is correctly hooked to the device which keeps the door fully open.

8) 9) 10) 11)

Opening/closing from outside

Opening: turn the key metal insert in the lock and pull handle A fig. 13 in the direction shown by the arrow, then slide the door towards the rear of the vehicle until it locks into place and can go no further. Closing: grab handle A fig. 13 and push towards the front of the vehicle. Lock with the key.

F0V0085

Opening/closing from the inside (Doblò/Doblò Combi versions)

Opening: push switch A fig. 14 to unlock the door, then pull the handle and slide the door towards the rear of the vehicle until it can go no further. Closing: push switch A fig. 14 to release the door and then push it towards the front of the vehicle.

CHILD SAFETY DEVICE

KNOWING YOUR CAR

This system prevents the sliding side doors being opened from the inside. It fig. 16 can be engaged only with the sliding side door open:

- position 1 - device engaged (door locked);

- position 2 - device not engaged (door may be opened from the inside). The device remains engaged even if the doors are electrically unlocked.

12)

F0V0382

KEY EMERGENCY LOCK (KEL) DEVICE

The sliding side doors are provided with a device for locking all the doors using the lock in the case of a power fault. The device can be engaged, with the sliding side doors open, as follows fig. 16:

Position 2: device not engaged

(doors released)

position 1: device engaged (fit the metal insert of the ignition key in its seat and rotate clockwise), door locked The device is released and thus the doors can be opened as follows: in the event that electrical operation is restored:

by remote control or

opening a front door by inserting the key into the key pawl. if the power is not restored;

opening the driver side door by key pawl and the other doors (passenger's side and sliding side door) pulling the inner handle.

F0V0383

DOUBLE REAR SWING DOORS

The double rear swing doors are fitted with a link system that stops them when they have opened to an angle of approximately 90 degrees. To open them wider to an angle of 180 degrees, push the locking device A fig. 17 (one on each side) as shown in the diagram and simultaneously open the doors.

13)

F0V0186

F0V0067

Using the key latch on the door, you can do the following:

for Cargo versions with wing door: centrally unlock the load compartment (sliding side doors + rear wing doors), centrally lock all the doors;

for Doblò/Doblò Combi versions with swing door: local unlocking/ locking.

Opening/closing the first swing door from the outside

To open the door, turn the key metal insert in the lock or press button

on the remote control and then pull handle A fig. 18 in the direction of the arrow. To close the door, turn the key metal insert in the closing direction or press button

on the remote control.

14)

Emergency opening of the first swing door from the inside

From inside, use device A fig. 19.

F0V0080

Opening the second swing door

After having opened the first door, pull handle A fig. 20 in the direction shown by the arrow. IMPORTANT Pull handle A fig. 20 only in the direction shown in the diagram.

FIXED WINDOW

(for versions/markets, where provided)

Using the fixed window:

Open the swing doors.

Push lever A fig. 21 downwards, ensuring that it is held down until the lock goes beyond the crossmember;

Open using both hands, making sure to aid the fixed window opening by using handle B fig. 21;

To close, pull the fixed window downwards using the suitable handle B. IMPORTANT The fixed window remains open up to a speed of 110 km/h. With the fixed window open it is possible, if necessary, to lower the crossmember C, accompanying it from position 1 to position 2 fig. 22. To release and lower the crossmember, act, with rear doors open, on lever D fig. 23.

F0V0518

F0V0078

F0V0526

KNOWING YOUR CAR

WARNING

8) Before opening a door, ensure that you

can do it in conditions of safety.

9) You must not open the left-hand sliding side door with the fuel cap open while refuelling. Check that the fuel cap is closed while opening/closing the sliding side door to avoid damage.

F0V0527

F0V0528

10) If you are parked on a slope, do not leave the sliding door locked in the open position. An involuntary impact could unhook the door, causing it to move.

11) Before leaving the vehicle parked with the sliding doors open, always check that they are locked into place.

12) Always use this device when carrying children.

13) The spring-loaded system was designed for optimum usage. Accidental knocks or a strong gust of wind may release the springs, forcing the doors to close.

14) When closing, shut the right hand door fully before you close the left hand door. Never shut the two doors at the same time.

WARNING

2) Make sure that the left sliding side door

is all closed before refuelling to prevent damage to the door and to the sliding locking system with fuel filler cap open, activated during refuelling.

SEATS

DRIVER’S SEAT

(for Cargo versions, where provided)

15)

Longitudinal adjustment

Raise the lever A fig. 24 and push the seat forwards or backwards: in driving position your arms should be slightly bent and your hands should rest on the rim of the steering wheel.

16)

Reclining backrest adjustment

Lift lever B fig. 24 and, slightly detaching the back from the backrest, accompany the movement of the backrest until it is in the desired position.

F0V0210

DRIVER’S SEAT

(for Doblò/Doblò Combi/Cargo versions, where provided)

15)

Lengthwise adjustment

Lift the lever A fig. 25 and push the seat forwards or backwards: in the driving position your arms should rest on the rim of the steering wheel.

16)

F0V0013

Backrest angle adjustment

Turn knob B fig. 25

Driver seat height adjustment

(for versions/markets, where provided)

Operate lever C fig. 25 to lift or lower the rear part of the cushion to achieve the most comfortable driving position.

IMPORTANT Adjustment must be carried out only when seated in the relevant seat.

Driver seat lumbar adjustment

(for versions/markets, where provided)

Turn knob D fig. 25 to adjust the backrest support.

Heated seats

(for versions/markets, where provided)

With the key turned to MAR, press button A fig. 26 to switch the function on/off. When the function is enabled, the LED on the button turns on.

F0V0208

FOLDAWAY PASSENGER SEAT

(for versions/markets, where provided)

The passenger seat can be folded away on some Cargo versions.

17)

Completely retract the seat for a total folding down avoiding interference with the dashboard.

Seat folding

To fold the seat, proceed as follows:

open the passenger side door;

pull levers A and fold the backrest forwards in the direction indicated by the arrow;

then push the backrest B fig. 28down: the seat is now completely folded over on itself into the "table" position;

F0V0144

F0V0146

KNOWING YOUR CAR

pull flap C fig. 29 and push the backrest down further: the seat is now completely folded away.

F0V0142

F0V0143

Repositioning the seat

To return the seat back to its normal position, proceed as follows:

grip tab A fig. 30 and lift the

backrest upwards;

operate levers B fig. 31 and lift the

seat further upwards.

18) 19)

F0V0145

ACCESS TO THE REAR SEATS

(Doblò and Doblò Combi versions)

To access the rear seats, open one of the sliding side doors (see "Doors" in this section).

FOLDING TABLE SEAT

(Doblò and Doblò Combi versions, where provided)

On some versions the seat can be folded into a table position.

20)

Completely retract the seat in table position for a total folding down avoiding interference with the dashboard.

IMPORTANT Move the seat only when there are no rear passengers. Seat folding

Open the passenger side door;

Pull lever A fig. 32 and fold the backrest forwards in the direction indicated by the arrow;

Push the backrest B fig. 32 down: the seat is now completely folded over on itself into the "table" position.

F0V0201

Repositioning the seat:

operate lever A fig. 32 and lift the backrest upwards.

3RD ROW SEAT MOVEMENTS

Proceed as follows:

completely lower the rear seat head restraints;

move the seat belt to the side, making sure that it is fully extended and not twisted;

lift lever A fig. 33 retaining the backrest and fold the latter forwards. When you lift the lever, you will see a red band.

pull the tape B fig. 33 behind the seat backrests and fold the seats and the backrests forwards.

F0V0407

F0V0408

Note On the split seats, there are

rubber bands on the lower edge of the cushion so you can attach the folded seat to the 2nd row rear seat head restraint rods (see the plate on the seat backrest fig. 33).

21)

REMOVING 3RD ROW SEATS

Proceed as follows:

remove the rear seat head restraints; remove the rolling curtain from its

housing;

move the seat belt to the side, making sure that it is fully extended and not twisted;

lift lever A fig. 33 retaining the backrest and fold the latter forwards. When you lift the lever, you will see a red band.

pull the tape B fig. 33 behind the seat backrests and fold the seats and the backrests forwards;

position the head restraint using the openings under the cushion to insert the rods;

push the lever as indicated in fig. 35;

F0V0206

remove the seat from the

attachments on the floor.

REPOSITIONING 3RD ROW SEATS

Proceed as follows:

attach the hooks to the floor fig. 36;

KNOWING YOUR CAR

push the lever as illustrated in fig. 35 and pull it to make sure that the seat is still correctly secured;

withdraw the head restraint under the cushion;

fold the cushion and the backrest over;

reposition the head restraint;

re-position the rolling curtain in its housing.

F0V0207

FRONT BENCH

(for versions/markets, where provided)

15)

Some versions feature a front bench with central and side passenger backrests that fold down to a table. To fold down the backrests, pull tabs A or B fig. 37 to fold down the central or side section of the backrest respectively fig. 38.

F0V0551

The central backrest features a retaining clip that can be used to hold documents. IMPORTANT Before folding down the central backrest, you need to completely lower the head restraint to prevent it from interfering with the gear lever in certain driving conditions. By pulling tab C fig. 37, you can also raise the single central and side seat cushion to access a dedicated storage compartment fig. 39.

IMPORTANT Make sure that the seat is properly secured to the fastenings on the floor and that the lever A fig. 33 is tightened (red band not visible).

F0V0550

F0V0552

+ 268 hidden pages