Fender Showman 412S User Manual

Your new Showman®412S Loudspeaker Enclosure is constructed from 5/8" (1.6 cm) 11-ply Birch Plywood and is capable of handling up to 300 Watts. The Showman®412S features four 12" (30.5cm) speakers with 54 oz (1.53 kg) magnets and is designed for use with the Fender
®
CONNECTING THE SHOWMAN®412S LOUDSPEAKER ENCLOSURE
Because the Showman®412S may be used in either a stereo or monaural configuration, it it important to make connections from your amplifier to the 412S correctly. When using a stereo amplifier such as the Fender
®
MONO position. Note that the left input jack will now be disconnected and unusable.
Note: If using a tube amplifier, your tube amp could fall into protect mode or even be damaged by using an improper impedance load. Therefore, it is important to heed all caution and safety warnings on both your amplifier and Showman®412S loudspeaker enclosure.
SPECIFICATIONS
PART NUMBER 021-1675-010
DRIVERS Four 12" (30.5 cm) Steel Frame Drivers
1 3/4" (4.5 cm) Voice Coils 54 oz (1.53 kg) Magnets
CABINET 5/8" (1.6 cm) 11-ply Birch Plywood
SENSITIVITY 96 dB, 1 Watt - 1 Meter
POWER HANDLING 300 Watts
IMPEDANCE 16Mono, 8/8Stereo
CONNECTIONS 1/4" High Current Input Jacks
ENCLOSURE VOLUME VB = 5.2 ft
3
(147 L)
DIMENSIONS
Height: 30 in (76.2 cm) Width: 30 in (76.2 cm) Depth: 15 in (38.1 cm)
WEIGHT 99 lb (45.0 kg)
Product specifications are subject to change without notice.
P/N 057486 REV A
THE FENDER®SHOWMAN®412S LOUDSPEAKER ENCLOSURE
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA USA
Copyright © 2002 FMIC
Loading...