™
Frontman 25R Owner's Manual
Your new Frontman™25R has been designed by the
same Fender®Tone-Team that has created many
other classic Fender amps like the ToneMaster®,
Prosonic™, Princeton®Chorus and Twin Reverb®to
name a few. Moreover, it’s crafted in the same
tradition and given the same care and attention to
detail as our classic ‘59 Bassman and the versatile
Featuring convenient all front panel mounted controls
and jacks, the Frontman™25R also offers remote
channel switching via the optional footswitch.
Furthermore with output jacks for both an 8Ω
external speaker enclosure and headphones, your
Frontman™25R has the flexibility of volume levels for
everything from private practicing to small gigs.
Hot Rod Series.
Please read through this manual. Check out the
Solidly built and affordably priced, the Frontman 25R
is a great amp by any measure. Because of its
illustrious family tree, your new Two Tone Tommy is
sound settings and experiment. Spin the tone
controls and see what happens. Take the time to get
to know each other... Tune-up, Plug-in and PLAY-ON.
capable of a lot more than meets the eye.
Frontman 25R Sound Settings
Old Faithful / Any Pick-up Combination (Normal Channel)
Ω
Barbed Wire / Bridge Position (Drive Channel)
Hard Times / Neck Position (Drive Channel)
Simply Speaking / Bridge Position (Drive Channel)
Ω
Ω
Ω
Frontman 25R Front Panel Functions
Ω
A
A. INPUT - Plug your guitar in here.
B. VOLUME - Adjusts the overall loudness of the
NORMAL CHANNEL.
C. GAIN - Adjusts the amount of preamp gain in the
DRIVE CHANNEL. Cleaner sound is achieved at lower
gain settings; high gain settings will produce more
sustain and distortion. This control works in
conjunction with the DRIVE VOLUME control (item E) to
set the overall loudness of the DRIVE CHANNEL.
D. GAIN SELECT - Activates the DRIVE CHANNEL.
E. DRIVE VOLUME - Indicates the DRIVE CHANNEL is
selected.
F. DRIVE CHANNEL INDICATOR - Adjusts the
overall loudness of the DRIVE CHANNEL.
G. TREBLE - Adjusts the amount of boost or cut in
the high frequency range.
H. MID - Adjusts the overall tone quality without
affecting the signal level. High MID settings will
provide emphasis in the midrange frequencies
whereas a lower setting will notch the midrange.
B
C
D
E
F
GH
I
K. FOOTSWITCH - This jack provides an input
connection for the optional remote footswitch to
select between the NORMAL and DRIVE CHANNELS. For
proper operation of the footswitch, the GAIN
SELECT switch (item D) should be in the out position.
L. EXTERNAL SPEAKER - This jack provides an
output to an external speaker enclosure. The
enclosure must have a minimum impedance of 8Ω.
Using this jack automatically disables the internal
speaker. DO NOT PLUG HEADPHONES IN HERE.
M. HEADPHONES - This jack provides an output to
a standard stereo or mono pair of headphones for
private listening. Using this jack automatically
disables the speaker. This jack can also be used as
an unbalanced line output by using either a stereo or
mono 1/4" phone plug connection. CAUTION:
PROLONGED LISTENING AT HIGH LEVELS MAY BE HAZARDOUS
TO YOUR HEARING AND POSSIBLY CAUSE HEARING DAMAGE
N. POWER INDICATOR - Indicates the Frontman
25R is receiving AC power.
O. POWER SWITCH - This switch turns the AC
power ON and OFF. When the switch is OFF, the
amplifier is completely shut down.
J
K
L
M
O
N
.
I. BASS - Adjusts the amount of boost or cut in the
low frequency range.
J. REVERB - Adjusts the amount of reverb present
in both the NORMAL and DRIVE CHANNELS.
LINE CORD - This amplifier is equipped with a
grounding type supply cord to reduce the possibility
of shock hazard. Be sure to connect it to a grounded
receptacle. DO NOT ALTER THE AC PLUG.
Frontman 25R Specifications
TYPE PR 225
PART NUMBER 22-1572 (100V)
22-1502 (120V)
22-1562 (230V)
22-1542 (230V) UK
22-1532 (240V) Aust
POWER 100V version: 100V AC, 50/60 Hz, 75W
REQUIREMENTS 120V version: 120V AC, 60 Hz, 75W
230V version: 230V AC, 50 Hz, 75W
240V version: 240V AC, 50 Hz, 75W
INPUT IMPEDANCE >1MΩ
NOMINAL INPUT LEVEL 100 mV
POWER OUTPUT 25W R.M.S.
RATED LOAD IMPEDANCE 8Ω
SPEAKER COMPLEMENT One 8Ω Special Design
10" Speaker (P/N 036502)
ACCESSORIES Optional Remote Single Footswitch
(P/N 002-8890-000)
DIMENSIONS Height: 15.5 in. 39.4 cm
Width: 17 in. 43.2 cm
Depth: 8.5 in. 21.6 cm
Weight: 25 lbs. 11.4 kg
WARNING: -NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL ONLY.
-TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS AMPLIFIER TO RAIN OR MOISTURE.
-THIS UNIT MUST BE EARTH GROUNDED.
Fender®, Strat®, ToneMaster®, Princeton®and Twin
Reverb®are registered trademarks of the Fender
THIS EQUIPMENT CONFORMS TO
THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC
Musical Instruments Corporation.
Frontman™and Prosonic™are trademarks of the
Fender Musical Instruments Corporation.
FENDER
Product specifications are subject to change without notice.
A PRODUCT OF:
®
MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
Loading...