Fender Artist-1272A-SM, Artist-1275A-SM Service Manual

ARTIST SERIES STAGE MONITORS

1272A
1275A

p/n 071-1272-100 (1272A)
p/n 071-1275-100 (1275A)

SERVICE MANUAL

Fender Musical Instruments Corp.

7975 North Hayden Road Scottsdale, AZ 85258

ARTIST SERIES STAGE MONITORS: 1272A, 1275A

(This is the model name for warranty claims)

SERVICE MANUAL

FEBRUARY 1995 REV A

IMPORTANT NOTICE:

The information contained herein is CONFIDENTIAL and PROPRIETARY to Fender Musical Instruments Corp. It is
disclosed solely for use by qualified technicians for purposes of equipment maintenance and service. It is not to be
disclosed to others without the expressed permission of Fender Musical Instruments Co. All specifications subject to
change without notice.

For warranty repair service, only Fender specified part numbers are to be used. It is recommended they also be used
for post-warranty maintenance and repair.

Parts marked with an asterisk (
and SAFETY requirements. DO NOT USE A SUBSTITUTE!

A coded naming convention is used in the description of certain parts. The codes and what they mean are as follows:

CAPACITOR CODES HARDWARE CODES

CAP AE = Aluminum Electrolytic BLX = Black Oxide
CAP CA = Ceramic Axial CR = Chrome Plated
CAP CD = Ceramic Disk HWH = Hex Washer Head
CAP MPF = Metalized Polyester Film M = Machine Screw
CAP MY = Mylar NI = Nickel Plated
CAP PFF = Polyester Film/Foil OHP = Oval Head Phillips

RESISTOR CODES

RES CC = Carbon Comp SMA = Sheet Metal "A" Point
RES CF = Carbon Film SMB = Sheet Metal "B" Point
RES FP = Flame Proof SS = Stainless Steel
RES MF = Metal Film TF = Thread Forming
RES WW = Wire Wound ZI = Zinc Plated

*) indicate the required use of that specific part. This is necessary for RELIABILITY

PB = Particle Board
PHP = Pan Head Phillips
PHPS = Pan Head Phillips Sems