FEC PMWEX30, RMM-EX30 User Manual
MODEL RMM-EX30 RACK KIT
FEC
FOR SONY PMW-EX30
PARTS IDENTIFICATION
ALIGN THESE
HOLES BOTH
SIDES
THESE HOLES
TO THE FRONT
PLACE THE BASE
ON TOP OF THIS
FLANGE
REAR
BRACKET
1.
TRIM PANEL
SIDE PANELS
POSITION THE RIGHT SIDE PANEL, LEFT SIDE PANEL AND BASE
1.
REAR BRACKET
BASE
BLANK PANEL
HOLES FOR
THE BLANK
PANEL
AS SHOWN. CENTER THE COUNTERSUNK HOLES IN THE BASE
OVER THE THREADED HOLES ON THE SIDE PANELS AND INSERT
A 8-32 X 3/8" FLAT HEAD SCREW IN EACH HOLE (4).
2. THE PMW-EX30 CAN BE MOUNTED ON EITHER SIDE OF THE
KIT. REMOVE THE SCREWS FROM THE SIDE OF THE UNIT THAT
WILL BE PLACED AGAINST THE SIDE PANEL. LOWER THE FEET
ON THE BOTTOM OF THE UNIT THROUGH THE CLEARANCE
HOLES IN THE BASE/ SHELF ASSEMBLY. ALIGN THE OBROUND
HOLES IN THE SIDE PANEL WITH THE THREADED HOLES IN THE
SIDE OF THE UNIT AND INSERT A 3MM X 10MM PAN HEAD
SCREW (4) THROUGH THE SIDE PANEL INTO THE UNIT.
POSITION THE REAR BRACKET AS SHOWN IN STEP 1.
ATTACH THE REAR BRACKET TO THE REAR OF THE BASE SHELF
WITH 3MM X 10MM PAN HEAD SCREWS (2) AND 3MM HEX
NUTS (2). INSERT A 3MM X 6MM PAN HEAD SCREW (1)
THROUGH THE OBROUND HOLE IN THE BRACKET AND INTO
THE REAR OF THE UNIT.
2.
HOLES FOR
THE UNIT
3.
THIS FLANGE
ON OUTSIDE
OF RAIL
WHEN USING ONLY ONE UNIT, A BLANK PANEL IS SUPPLIED TO
FILL IN THE UNUSED SPACE. POSITION THE BLANK PANEL AS
SHOWN. CENTER THE OBROUND HOLES IN THE BOTTOM OF
THE BLANK PANEL OVER THE MATCHING HOLES IN THE BASE.
INSERT AN 8-32 X 3/8" TRUSS HEAD SCREW (2) IN EACH HOLE
AND SECURE EACH SCREW WITH AN 8-32 HEX NUT(2). REPEAT
THE SAME PROCESS WITH THE ALIGNED HOLES IN THE BLANK
PANEL AND SIDE PANEL. INSERT A 8-32 X 3/8" TRUSS HEAD
SCREW (2) THROUGH THE SIDE PANEL AND SECURE IT WITH
AN 8-32 HEX NUT (2).
3. MOUNT THE ASSEMBLY ON THE CABINET FRONT MOUNTING
RAILS WITH 10-32 X 5/8" TRUSS HEAD BLACK OXIDE SCREWS (4).
4. SLIDE THE WINDOW IN THE TRIM PANEL OVER THE EQUIPMENT
AND SECURE THE PANEL TO THE CABINET RAILS WITH 10-32 X 1"
COLOR MATCH SCREWS.
FEC
ALBERTSON, NY 11507
PO BOX 266
PHONE: (516) 967-9565
FAX: (516) 908-3537
P/N: 16092
RMK-2303
1/6/09
4.
KIT HEIGHT: 3 RU (5.219")
KIT DEPTH: 7.25"
HARDWARE:
4 10-32 X 1" TRUSS HEAD SCREWS (BO)
4 10-32 X 5/8" TRUSS HEAD SCREWS (BO)
4 8-32 X 3/8" FLAT HEAD SCREWS (UC)
4 8-32 X 3/8" TRUSS HEAD SCREWS
4 8-32 KEPS NUTS
6 3MM X 10MM PAN HEAD SCREWS
2 3MM X 6MM PAN HEAD SCREW
2 3MM HEX NUTS
Loading...