Fairchild Semiconductor KH206 Datasheet

Features
-3dB bandwidth of 180MHz
70MHz large signal bandwidth (20Vpp)
0.1% settling in 19ns
Overdrive protected
Stable without compensation
3Minput impedance
Direct replacement for CLC206
Applications
Fast, precision A/D conversion
Automatic test equipment
Input/output amplifiers
Photodiode, CCD preamps
High-speed modems, radios
Line drivers
General Description
The KH206 is a wideband, overdrive-protected operational amplifier designed for applications needing both speed and high drive capability (100mA). Utilizing a well-established current feed­back architecture, the KH206 exhibits performance far beyond that of conventional voltage feedback op amps. For example, the KH206 has a bandwidth of 180MHz at a gain of +20 and settles to 0.1% in 19ns. Plus, the KH206 has a combination of important features not found in other high-speed op amps.
The 100mA output current and the large signal bandwidth of 70MHz (20Vpp) make the KH206 ideal for applications which involve both high signal amplitudes and heavy loads as in coaxial line driving applications.
Complete overdrive protection has been designed into the KH206. This is critical for applications, such as ATE and instrumentation, which require protection from signal levels high enough to cause saturation of the amplifier. This feature allows the output of the op amp to be protected against short circuits using techniques developed for low-speed op amps. With this capability, even the fastest signal sources can feature effective short circuit protection.
The KH206 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions:
KH206AI -25°C to +85°C 12-pin TO-8 can KH206AK -55°C to +125°C 12-pin TO-8 can, features
burn-in & hermetic testing
KH206AM -55°C to +125°C 12-pin TO-8 can,
environmentally screened and electrically
tested to MIL-STD-883 KH206HXC -55°C to +125°C SMD#: 5962-8985801HXC KH206HXA -55°C to +125°C SMD#: 5962-8985801HXA
KH206
Overdrive-Protected Wideband Op Amp
www.fairchildsemi.com
REV. 1A February 2001
Typical Performance
Bottom View
DATA SHEET KH206
2 REV. 1A February 2001
KH206 Electrical Characteristics
(Av= +20,Vcc= ±15V, RL= 200, Rf= 2k; unless specified)
Absolute Maximum Ratings Recommended Operating Conditions
Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters.
Loading...
+ 3 hidden pages