© 2000 Fairchild Semiconductor Corporation DS009162 www.fairchildsemi.com
October 1986
Revised February 2000
DM74ALS563A Octal D-Type Transparent Latch with 3-STATE Output
DM74ALS563A
Octal D-Type Transparent Latch with 3-STATE Output
General Description
These 8-bit register s feature totem-pole 3- STATE outputs
designed specifically fo r driving highly-capacitive or relatively low-impedance loa ds. Th e hi gh -im ped ance state and
increased high-logic-level drive provide these registers with
the capability of being connected directly to and driving the
bus lines in a bu s-or ga nized sy stem w ith ou t n eed fo r interface or pull-up components. They are particularly attractive
for implementing buffer registers, I/O ports, bidirectional
bus drivers, and working registers.
The eight inverting latches of the DM74ALS563A are transparent D-type latches. While the e nable ( G) is HIGH th e Q
outputs will follow the da ta (D) inputs. W hen the enable is
taken LOW the output will be latched at the complement of
the level of the data that was set up.
A buffered output control input ca n be used to place the
eight outputs in either a normal l ogic state (HIGH or LOW
logic levels) or a high-impedance state. In the high-impedance state the outputs ne ither load nor dr ive the bus lines
significantly.
The output control does not affect the i nternal oper ation of
the latches. That is, the old data can be retained or new
data can be entered even while the outputs are OFF.
Features
■ Switching specifications at 50 pF
■ Switching specifications guaranteed over full tempera-
ture and V
CC
range
■ Advanced oxide-isolated, ion-implanted Schottky TTL
process
■ 3-STATE buffer-type outputs drive bus lines directly
Ordering Code:
Devices also availab le in Tape and Reel. Specify by appending th e s uffix let t er “X” to the ordering code.
Connection Diagram
Order Number Package Number Package Description
DM74ALS563AWM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
DM74ALS563AN N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide