Faber INLT28SS600 Specsheet

INSERT RANGE HOOD

INCA INLIGHT

INSERT VENTILATION TO PAIR WITH CURRENT KITCHEN TRENDS. An elegant, built in ush mounted range hood with a depth of

11 ¼ making it an ideal choice for shallow depth cabinetry and perfect for kitchen remodeling projects. The sleek stainless steel panel mounts ush for a clean
fully integrated look and can be accented with a liner accessory.

AVAILABLE MODELS

Model # Size / Color Motor Class (CFM) Sound Levels (sones)

INLT28SS600 28 Stainless 600 CFM 2.8 - 7.5 sones

KEY FEATURES

Backlit electronic controls

Backlit electronic controls with a White LED
light to indicate the current speed and two
level lighting

LED Light Bar

Low consumption 1 watt LED bulbs

with a dimmer light up your cooking

but use very little energy

Perimeter Aspiration

Air is forced through narrow slots around
the perimeter of the center panel greatly
improving contaminant extraction.

Remote Control (INCLUDED)

Control all features of the hood from the
convenience of a wireless remote control

INSERT RANGE HOOD

INCA INLIGHT

SPECIFICATIONS DIMENSIONS

cut out dimensions 26 9/16" w x 10 1/4" d

convertible to ductless /
recirculating

body depth|height 11 1/14" | 12 1/8"

controls 4 speed electronic w/ white LED

lighting LED light bar

ducting top 6" round

grease lters dishwasher safe mesh

perimetric ltration system yes

10 minute intensive speed yes

15 minute auto shut o yes

ADA compliant yes - remote included

power cord included yes

AC power 400 watts / 3.2 amps

yes – kit purchase separately

PERFORMANCE

SPEED 1 2 3 BOOST

CFM 150 300 450 560

Sones 2.8 4.3 6.0 7.5

10"7/162"5/8

9"1/16

Overall

3"7/8

26"9/16

27"9/16

5"7/8

8"11/16

22"3/16

Min.2"3/8 - Max.2"3/4

10"3/16

11"1/4

ACCESSORIES

# CFMRED –

CFM Reducer Kit*

For use in make up air areas where
an under 300 cfm hood is required.
is kit reduces the ducting to 5”
round and reduces the cfm to under

300.

# CFMRED2 –

CFM Reducer Kit*

For use in make up air environments
where an under 400 cfm hood is required.
is kit reduces the ducting to 5” round
and reduces the cfm from 600 to under

400.

# FILTER1 –

Charcoal Filter Kit

High quality charcoal lter for use
when recirculating the air back into
the kitchen. Filters out odor and
should be replaced every 6 months

# FILTER1LL –

Long Lasting Charcoal Filter Kit

New washable charcoal lter can be
recharged and washed up to 8 times. For
use when recirculating the air back into
the kitchen. Filters out odor and can last
up to 4 years.

Rev :4/18

# LINE30ST / LINE36ST –

Cut Out

Stainless Steel Liner 30 & 36"

Create a perfectly-sealed, non-
combustible 4” tall perimeter to
“line” the wood below the hood.
Depth adjustable from 16” - 17
7/8” .

# MUDAMPER6 / MUDAMPER8 –

Universal Make-Up Air Damper

Satises make-up air requirements,
this kit uses an air switch to activate the
make-up air damper to open and bring
fresh air into the home when the hood
fan is on. It then closes tightly when the
hood is o. e CFM level is not reduced
with this accessory.

30" Liner

# WIREBOX –

Fixed Wiring Box

Replace the power cord with a hard wired
box to power the range hood

36" Liner

WARNING! Product specications are subject to change without
notication. Consult the installation instructions before you begin
installing this range hood. * Check local make up air codes for
guidelines.

2 Cabot Road Hudson, MA 01749 • TEL: [phone] • E-Mail: [e-mail] www.faberonline.com

Imagined in Italy