Extron electronic IP Link IR Learner IPL T IRL User Manual

IP

L

T

IRL

R

1

0

0

L

I

N

K

A

C

T

I

R

R

E

A

D

Y

TCP/IP

Network

Remote Control

PC

Ethernet

Extron
IPL T IRL

IP Link IR Learner

Japan

+81.3. 3511.7655
+81.3. 3511.7656 FAX

www.extron.com

© 2006 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.

USA

714.4 91.1500 / 800. 633. 9876

714.4 91.1517 FAX

Europe

+31.3 3.453. 4040 / +800. 3987.6673
+31.3 3.453. 4050 F AX

Asia

+65. 6383. 4400 / +80 0.7339.8766
+65. 6383. 4664 FA X

Japan

+81.3. 3511.7655
+81.3. 3511.7656 FAX

www.extron.com

© 2006 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.

USA

714.4 91.1500 / 800. 633. 9876

714.4 91.1517 FAX

Europe

+31.3 3.453. 4040 / +800. 3987.6673
+31.3 3.453. 4050 F AX

Asia

+65. 6383. 4400 / +80 0.7339.8766
+65. 6383. 4664 FA X

IPL T IRL

IP Link® IR Learner

I P L In k® — I P L I n k® A cc es s o r Ie s

fEAturEs

•

Captures IR remote control codes to create IP Link® IR drivers

•

Front panel IR emitter verifies accuracy of captured IR codes

•

Integral high performance Web server

•

Free, easy-to-use IR learning software

•

Supports industry standard Ethernet protocols

•

UL/CUL listed and CE compliant

•

External international power supply included, part # 70-055-01

dEscrIPtIon

The Extron IPL T IRL is an IP Link® IR Learner that captures infrared remote control codes to
create drivers usable with any IP Link® IR port. The IPL T IRL has the ability to learn IR codes
from existing remote controls. It is designed to add devices to the comprehensive database of
infrared codes supplied by Extron.

The IPL T IRL includes a front panel IR emitter that makes it easy to verify the accuracy of
captured IR codes.

When used with the free Extron IR Learner software, you can "teach" commands to the IPL T IRL
by transmitting infrared signals from your existing remote controls to the IPL T IRL's learning
eye. To do this, simply point the device's remote control at the front panel of the IPL T IRL from
a distance of between 2 and 12 feet.

Once the codes have been learned, they can be stored on a PC transmitted to any device
with an IP Link IR port, such as the IPL T SFI244. Such a combination will allow any device
that accepts IR control signals to be controlled from any computer connected to a Local Area
Network, Wide Area Network, or the Internet.

sPEcIfIcAtIons

EtH Ern Et co ntr oL Int Er fAcE

Connectors . .. .. . .. .. . .. .. . .. .. .. . 1 RJ-45 female connector

Data rate .. .. . .. .. . .. .. .. . .. .. . .. .. 10/100Base-T, half/full duplex with autodetect

Protocols . .. .. .. . .. .. . .. .. . .. .. . .. . ARP, DHCP, ICMP (ping), TCP/IP, UDP/IP, Telnet, HTTP, SMTP

Default settings .. . .. .. . .. .. . .. .. . Link speed and duplex level = autodetected

IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off

sEr IAL c onf IGu rAtI on In tEr fAcE

Port number / Type .. . .. .. . .. .. . . 1 RS-232 serial

Connectors . .. .. . .. .. . .. .. . .. .. .. . (1) 9-pin female D

Baud rate and protocol .. .. . .. . 300 to 115200 baud default settings (adjustable), 9600 baud,

Pin configurations .. . .. .. . .. .. . .. 2 = TX, 3 = RX, 5 = GND

8 data bits, 1 stop bit, no parity

Ir / s Er IAL co ntr oL In tEr fAcE

Output number .. .. . .. .. . .. .. . .. .. 1

Connectors . .. .. . .. .. . .. .. . .. .. .. . (1) 3.5 mm, 2 pole captive screw connector

IR output carrier frequency .. .. 30 kHz to 1 MHz

IR learning carrier frequency . 30 kHz to 1 MHz
IR learning capture distance .. 2" (5.1 cm) to 12" (30.5 cm) from the front panel

Pin configurations .. . .. .. . .. .. . .. pin 1 = signal, pin 2 = GND

GEn ErA L

External power supply . .. . .. .. . 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable;

Power input requirements .. . .. 12 VDC, 0.5 A

Temperature / Humidity .. .. . .. . Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Rack mount . .. . .. .. . .. .. . .. .. . .. . Yes, with optional 1U 9.5” deep rack shelf kit, part #60-190-01; or

Enclosure type .. .. .. . .. .. . .. .. . .. Metal

Enclosure dimensions . .. .. . .. .. 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)

Product / Shipping weight . .. .. 0.7 lbs (0.3 kg) / 2 lbs (1 kg)

Vibration . .. .. . .. .. . .. .. . .. .. . .. .. . ISTA 1A in carton (International Safe Transit Association)

Listings .. . .. .. . .. .. . .. .. . .. .. . .. .. . UL, CUL (UL rated for use in a plenum air space: meets UL2043 and UL60950

Compliances . .. .. . .. .. . .. .. . .. .. . CE, FCC Class A, VCCI, AS/NZS, ICES

MTBF . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. 30,000 hours

Warranty .. . .. .. .. . .. .. . .. .. . .. .. . . 3 years parts and labor

to 12 VDC, 1 A, regulated

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

the 1U 3.5" deep VersaTools
Also under-furniture mountable with optional bracket kit #70-212-01

4.3 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.)

for fire and smoke.)

®

rack shelf kit, part #60-190-20

modEL VErsIon d EscrIPtIo n PArt # msrP

IPL T IRL IR Learner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-544-08

$

770

449