Extron electronic HSA 200, HSA 222 User Manual

Specifications — HSA 200 Series, HSA 222 Series
Video— HSA 200SE, HSA 200CE
Gain ������������������������������������������������� 0 dB, 0�6 dB, 1�2 dB, selectable (when input is 0�7 Vp-p, output is 0�7 V, 0�75
V, 0�8 Vp-p)
Bandwidth �������������������������������������� 300 MHz (-3 dB)
N
Video input— HSA 200S, HSA 200C
Number/signal type ��������������������� 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video Connectors ������������������������������������� (1) 15-pin HD female
Video input— HSA 200SE, HSA 200
Number/signal type ��������������������� 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video Connectors ������������������������������������� (1) 15-pin HD female Nominal level �������������������������������� 1�0 Vp-p for Y of component video
Minimum/maximum levels �������� Analog: 0�3 V to 1�5 Vp-p with no offset at unity gain Impedance �������������������������������������� 75 ohms Horizontal frequency �������������������� 15 kHz to 135 kHz Vertical frequency �������������������������� 30 Hz to 170 Hz Input coupling ������������������������������� DC
Video output— HSA 200S, HSA 200C
Number/signal type ��������������������� 1 pass-through VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV
Connectors ������������������������������������� 5 BNC female on pigtails
Video outputHSA 200SE, HSA 200CE
Number/signal type ��������������������� 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video Connectors ������������������������������������� 5 BNC female on pigtails Nominal level �������������������������������� 1�0 Vp-p for Y of component video
Minimum/maximum levels �������� Analog: 0�3 V to 1�5 Vp-p Impedance �������������������������������������� 75 ohms DC offset ����������������������������������������� ±5 mV with input at 0 offset Return loss �������������������������������������� <-35 dB @ 5 MHz
0�7 Vp-p for RGB and for R-Y and B-Y of component video
component video
0�7 Vp-p for RGB and for R-Y and B-Y of component video
N
Output resolution may vary depending on whether or not the Extender is attached to the computer at startup, and also on the type of computer being used.
Sync— HSA 200SE, HSA 200CE
Input type ��������������������������������������� RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync Output type ������������������������������������ RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync Input level �������������������������������������� 2�0 V to 5�0 Vp-p Output level ����������������������������������� TTL: 5�0 Vp-p, unterminated Input impedance ��������������������������� 510 ohms Output impedance ������������������������ 75 ohms Max� propagation delay ��������������� 18�8 ns Max� rise/fall time ������������������������ 4 ns Polarity�������������������������������������������� Positive or negative (follows input)
Extron HSA 200S, HSA 200SE, HSA 200C, HSA 200CE, HSA 222S, HSA 222C • Specications
1
Specifications — HSA 200 Series, HSA 222 Series, cont’d
Audio— HSA 200SE, HSA 200CE
Gain ������������������������������������������������� Unbalanced output: 0 dB; balanced output: +6 dB Frequency response ���������������������� 20 Hz to 20 kHz, ±0�5 dB THD + Noise ���������������������������������� 0�025% @ 1 kHz, 0�020% @ 20 kHz at nominal level S/N �������������������������������������������������� >90 dB at rated maximum output (21 dB, balanced) Stereo channel separation ������������ >75 dB @ 20 Hz to 20 kHz
Audio input— HSA 200S, HSA 200C
Number/signal type ��������������������� 1 stereo, unbalanced Connectors ������������������������������������� (1) 3�5 mm stereo female jack
Audio input— HSA 200SE, HSA 200CE
Number/signal type ��������������������� 1 stereo, unbalanced Connectors ������������������������������������� (1) 3�5 mm stereo female jack Impedance �������������������������������������� >10k ohms unbalanced, DC coupled Nominal level �������������������������������� -10 dBV (316 mVrms) Maximum level ������������������������������ +6 dBu, (balanced or unbalanced) at 1% THD+N
N
Audio output— HSA 200S, HSA 200C
Number/signal type ��������������������� 1 pass-through stereo, unbalanced Connectors ������������������������������������� (1) 3�5 mm, direct insertion captive screw connector, 3 pole
Audio output— HSA 200SE, HSA 200CE
Number/signal type ��������������������� 1 stereo, balanced/unbalanced Connectors ������������������������������������� (1) 3�5 mm direct insertion captive screw connector, 5 pole Impedance �������������������������������������� 50 ohms unbalanced, 100 ohms balanced Nominal level �������������������������������� Unbalanced output: -10 dBV (316 mVrms)
Maximum level (Hi-Z) ����������������� >+14 dBu, balanced at 1% THD+N Maximum level (600 ohm) ����������� >+6 dBm, balanced at 1% THD+N
General
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Balanced output: -2 dBu (632 mVrms)
The Universal AC outlet is fully compatible with Europlug, British, Indian, Danish, and Italian plug types. See the Universal AC outlet guide on the Extron Web site, www.extron.com, for compatibility details on all plug types.
Power
HSA 200SE/CE ������������������ Supplied by an external power supply
External power supply
HSA 200SE/CE ������������������ 100 VAC to 240 VAC, 50/60 Hz, external, to 12 VDC, 0�42 A, regulated
Power input requirements
HSA 200SE/CE ������������������ 12 VDC, 0�2 A
Temperature/humidity
HSA 200SE/CE ������������������ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32° to +86 °F (0 to +30 °C) / 10% to 90%, noncondensing
Mounting
Furniture mount ���������������� Yes
Enclosure type ������������������������������� Metal
2
Extron HSA 200S, HSA 200SE, HSA 200C, HSA 200CE, HSA 222S, HSA 222C • Specications
Enclosure dimensions
C
HSA 200S, HSA 200SE — USA models
HSA 222S — USA model
HSA 200C, HSA 200CE — USA models
HSA 200S, HSA 200SE, HSA 200C, HSA 200CE — USA models
HSA 222S — USA model
HSA 200S/HSA 200SE — international square models
Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit's connector access side is underlined. Extron is not responsible for miscut mounting holes.
Top plate (outer rim) � 6�470" W x 5�125" D
(16�43 cm W x 13�02 cm D)
Surface cutout (inside rim)
5�970 ±0�0325" W x 4�625 ±0�0325" D (15�16 ±0�083 cm W x 11�75 ±0�083 cm D)
Top plate (inside tilt plate)
4�344" W x 3�000" D (11�03 cm W x 7�62 cm D)
Top plate (outer rim) � 6�470" W x 5�125" D
(16�43 cm W x 13�02 cm D)
Surface cutout (inside rim)
5�970 ±0�0325" W x 4�625 ±0�0325" D (15�16 ±0�083 cm W x 11�75 ±0�083 cm D)
Top plate (inside tilt plate)
4�660" W x 2�875" D (11�84 cm W x 7�30 cm D)
Top plate (outer rim) � 6�500" diameter (16�51 cm diameter) circle Surface cutout (inside rim)
6�000 ±0�0325" diameter (15�24 ±0�083 cm diameter) circle
Top plate (inside tilt plate)
4�344" W x 3�000" D (11�03 cm W x 7�62 cm D)
Box (under surface) ��� 4�0" H x 4�6" W (front of unit) x 4�4" D (10�2 cm H x 11�7 cm W x 11�2 cm D)
without clamps 4�0" H x 8�0" W (front of unit) x 4�4" D (10�2 cm H x 20�3 cm W x 11�2 cm D) with clamps
Box (under surface) ��� 5�6" H x 5�3" W (front of unit) x 3�6" D (14�2 cm H x 13�5 cm W x 9�1 cm D)
without clamps 5�6" H x 8�6" W (front of unit) x 3�6" D (14�2 cm H x 21�8 cm W x 9�1 cm D) with clamps
Top plate (outer rim) � 8�183" W x 6�375" D (20�79 cm W x 16�19 cm D) Surface cutout (inside rim)
7�683 ±0�0325" W x 5�875 ±0�0325" D (19�51 ±0�083 cm W x 14�92 ±0�083 cm D)
Top plate (inside tilt plate)
5�90" W x 4�10" D (14�99 cm W x 10�41 cm D)
Extron HSA 200S, HSA 200SE, HSA 200C, HSA 200CE, HSA 222S, HSA 222C • Specications
3
Specifications — HSA 200 Series, HSA 222 Series, cont’d
HSA 222S — international square models
Top plate (outer rim) � 8�183" W x 6�375" D (20�78 cm W x 16�19 cm D) Surface cutout (inside rim)
7�683 ±0�0325" W x 5�875 ±0�0325" D (19�51 ±0�083 cm W x 14�92 ±0�083 cm D)
Top plate (inside tilt plate)
6�183" W x 3�75" D (15�70 cm W x 9�53 cm D)
HSA 200C/HSA 200CE — international circular models
Top plate (outer rim) � 8�5" diameter (21�6 cm diameter) circle Surface cutout (inside rim)
8�0 ±0�0325" diameter (20�3 ±0�083 cm diameter) circle
Top plate (inside tilt plate)
5�9" W x 4�1" D (15�1 cm W x 10�4 cm D)
HSA 200 — international, all models
Box (under surface) ��� 4�0" H x 6�3" W (front of unit) x 5�0" D (10�2 cm H x 15�9 cm W x 12�7 cm D)
without clamps 4�0" H x 10�0" W (front of unit) x 5�0" D (10�2 cm H x 25�3 cm W x 12�7 cm D) with clamps
HSA 222 — international, all models
Box (under surface) ��� 4�5" H x 6�6" W (front of unit) x 4�9" D (11�4 cm H x 16�8 cm W x 12�4 cm D)
without clamps 4�5" H x 10�3" W (front of unit) x 4�9" D (11�4 cm H x 26�2 cm W x 12�4 cm D) with clamps
Product weight
HSA 200S, HSA 200C �������� 4�0 lbs (1�8 kg) HSA 222S ���������������������������� 3�5 lbs (1�6 kg) HSA 200SE, HSA 200CE ��� 5�0 lbs (2�3 kg)
Shipping weight
HSA 200S, HSA 200C, HSA 222S ������7 lbs (4 kg)
HSA 200SE, HSA 200CE ��� 8 lbs (4 kg) Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association) Regulatory compliance
Safety ����������������������������������� CE, CUL, CSA C/US, UL
EMI/EMC
HSA 200SE, HSA 200CE
CE, C-tick, FCC Class A, ICES, VCCI MTBF ����������������������������������������������� 30,000 hours Warranty ����������������������������������������� 3 years parts and labor
N
N
4
Extron HSA 200S, HSA 200SE, HSA 200C, HSA 200CE, HSA 222S, HSA 222C • Specications
All nominal levels are at ±10%.
Specifications are subject to change without notice.
7.6-102208-D13
Loading...