Extron electronic GLI 1000, GLI 1000 2RCA, GLI 1000 BNC, GLI 1000 2BNC, GLI 1000 HD User Manual
Rack Mount
The GLI 1000 unit can be mounted to the
rear of a flat 2U rack panel (also a 1U rack
panel for the 2RCA and 2BNC models) or
the front of a recessed rack panel (not
shown) using four 6-32 x 3/8 screws.
Projector Mount
Secure the optional mounting bracket to
the GLI 1000 using the four #8 machine
screws already installed in the side of the
GLI. Secure the GLI to the projector
mount by inserting the mounting bolt
through the slotted hole in the bracket.
(See figure on reverse.)
Surface Mount
Secure both optional mounting brackets to
the GLI 1000 using the eight #8 machine
screws already installed in the sides of the
GLI. Drill four 3/32” pilot holes, 1/4”
deep in the mounting surface. Secure the
GLI to the surface with four #8 wood
screws. (See figure on reverse.)
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
www.extron.com
714.491.1500
Fax 714.491.1517
GLI 1000 Installation Instructions
Rack Mount
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
GLI 1000 2RCA
GLI 1000 5BNC
HV
UT
P
IN
B
G
V
R
H
B
PUT
T
OU
G
R
Extron
GLI 1000 BNC
Ground Loop Inhibitor
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron
E
ID
V
PU
IN
VIDEO/Y
UTPUT
O
GLI 1000 15HD
INPUT
INPUT
Extron
GLI 1000 2BNC
Extron
GLI 1000 HD
Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
Printed in the USA
/Y
O
T
O/C
VIDE
GLI 1000 2RCA
UT
OUTP
VIDEO/C
GLI 1000 2BNC
OUTPUT
68-662-01
Rev. A
Computer
Ceiling
Digital Projector
Projector
GLI 1000 Installation Instructions (Cont’d)
Extron
RGB 109xi
Interface
Mount
INPUT OUTPUT
GLI 1000 15HD
Projector
Mounting
Bracket
Mounting
Bolt
Extron
GLI 1000 HD
#8 Screws (4 Plcs)
Each Side
Surface
Mount
Drill pilot holes
3/32" (2.4mm) diam.
1/4" (6.3mm) deep
Table/Wall-mount
Bracket (for wall-mount, rotate
bracket 90˚ before installing)
Mounting Screws (2 Plcs)
Each Side
__
OUTPUT
INPUT
GLI 1000 15HD
Loading...