Extron electronic FOX Matrix 7200, FOX Matrix 3200 User Manual
FOX Matrix 3200 FOX Matrix 7200
Modular Fiber Optic Matrix Switchers
Setup Guide
Fiber Optic Matrix Switchers
68-1740-51 Rev. A
08 14
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended
to alert the user of the presence of uninsulated dangerous voltage
within the product’s enclosure that may present a risk of electric
shock.
ATTENTION: This symbol, , when used on the product, is
intended to alert the user of important operating and maintenance
(servicing) instructions in the literature provided with the
equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur
le produit, signale à l’utilisateur la présence à l’intérieur du boîtier
du produit d’une tension électrique dangereuse susceptible de
provoquer un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en sav tion, la compatibilité EMI/EMF, l’accessibilité, et autres
sujets connexes, lisez les informations de sécurité et de conformité
Extron, réf. 68-290-01, sur le site Extron, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses
dieses Produktes gefährliche Spannungen herrschen, die nicht
isoliert sind und die einen elektrischen Schlag verursachen
können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer
in der im Lieferumfang enthaltenen Dokumentation besonders
wichtige Hinweise zur Bedienung und Wartung (Instandhaltung)
geben.
Weitere Informationen über die Sicherheitsrichtlinien,
Produkthandhabung, EMI/EMF-Kompatibilität, Zugänglichkeit und
verwandte Themen finden Sie in den Extron-Richtlinien für Sicherheit
und Handhabung (Artikelnummer 68-290-01) auf der Extron-Website,
www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el
producto, avisa al usuario de la presencia de voltaje peligroso sin
aislar dentro del producto, lo que puede representar un riesgo de
descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de importantes instrucciones
de uso y mantenimiento recogidas en la documentación
proporcionada con el equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y
temas relacionados, consulte la Guía de cumplimiento de normativas
y seguridad de Extron, referencia 68-290-01, en el sitio Web de Extron,
www.extron.com.
Инструкция по технике
безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о
наличии неизолированного опасного напряжения
внутри корпуса продукта, которое может привести к
поражению электрическим током.
ВНИМАНИЕ: Данный символ, , если указан на
продукте, предупреждает пользователя о наличии
важных инструкций по эксплуатации и обслуживанию в
руководстве, прилагаемом к данному оборудованию.
Для получения информации о правилах техники
безопасности, соблюдении нормативных требований,
электромагнитной совместимости (ЭМП/ЭДС), возможности
доступа и других вопросах см. руководство по безопасности
и соблюдению нормативных требований Extron на сайте
Extron: www.extron.com, номер по каталогу - 68-290-01.
Chinese Simplified（简体中文）
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险
电 压 ，有 触 电 危 险 。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 www.extron.com，参见
Extron 安全规范指南，产品编号 68-290-01。
Chinese Traditional（ ）
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手
冊中有重要的操作和維護（維修）説明。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關
主題的詳細資訊，請瀏覽 Extron 網站：www.extron.com，然後參閱
《Extron 安全性與法規遵守手冊》，準則編號 68-290-01。
Japanese
警告:この記号 が製品上に表示されている場合は、筐体内に絶
縁されて いない高 電圧が流 れ、感電の危 険があることを
示して います。
注意: この記号 が製品上に表示されている場合は、本
機の取扱説明書に 記載されている重要な操作と保
守( 整備)の指 示についてユーザー の 注 意を喚 起する
も ので す。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エク ストロ ン の ウェ ブ サイト www.extron.comよ り 『 Extron
Safety and Regulatory Compliance Guide』 (P/N 68-290-01) をご覧く
ださい。
Korean
경고: 이 기호 , 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이
있음을 경고합니다.
주의: 이 기호 , 가 제품에 사용될 경우, 장비와 함께 제공된
책자에 나와 있는 주요 운영 및 유지보수(정비) 지침을
경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련
항목에 대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron
안전 및 규제 준수 안내서, 68-290-01 조항을 참조하십시오.
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part15 of the FCC rules. The ClassA
limits provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference; the user must correct the
interference at his own expense.
NOTE: This unit was tested with shielded I/O cables on the
peripheral devices. Shielded cables must be used to ensure
compliance with FCC emissions limits.
For more information on safety guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and related topics, see the
“Extron Safety and Regulatory Compliance Guide
Extron website.
Copyright
© 2014 Extron Electronics. All rights reserved
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
(®)
The following registered trademarks
, registered service marks
RGB Systems, Inc. or Extron Electronics:
Registered Trademarks
AVTrac, Cable Cubby, CrossPoint, eBUS, EDID Manager, EDID Minder, Flat Field, GlobalViewer, Hideaway, Inline,
IP Intercom, IP Link, Key Minder, LockIt, MediaLink, PlenumVault, PoleVault, PowerCage, Pure3, Quantum, SoundField,
SpeedMount, SpeedSwitch, System INTEGRATOR, TeamWork, TouchLink, V-Lock, VersaTools, VoiceLift, VN-Matrix,
WallVault, WindoWall, XTP, and XTP Systems
Registered Service Mark
AAP, AFL - Accu-RATE Frame Lock, ADSP - Advanced Digital Sync Processing, Auto-Image, CableCover,
CDRS - Class D Ripple Suppression, DDSP - Digital Display Sync Processing, DMI - Dynamic Motion
Interpolation, Driver Configurator, DSP Configurator, DSVP - Digital Sync Validation Processing, EQIP, FastBite,
FlexOS, FOXBOX, Global Configurator, IP Intercom HelpDesk, LinkLicense, MAAP, MicroDigital, ProDSP,
QS-FPC - QuickSwitch Front Panel Controller, Scope-Trigger, SIS - Simple Instruction Set, Skew-Free, SpeedNav,
Triple-Action Switching, XTRA, ZipCaddy, and ZipClip
(SM)
: S3 Service Support Solutions
Trademarks
(™)
(SM)
(®)
, and trademarks
” on the
(TM)
are the property of
Conventions Used in this Guide
Notifications
The following are used:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT: Risque potentiel de blessure grave ou de
mort.
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X$* Y3%* Y3&* Y3^ CE}
NOTE: For commands and examples of computer or device
responses mentioned in this guide, the character “0” is used for
the number zero and “O” is the capital letter “o.”
Computer responses and directory paths that do not have variables are
written in the font shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs,
and eld names are written in the font shown here:
From the File menu, select New.
Click the OK button.
Contents
Introduction ................................. 1
About this Guide ........................... 1
About the FOX Matrix Switchers ... 2
Congurability and
Transmission modes ................ 3
Installation ................................... 5
Rear Panel ..................................... 5
A Note on I/O Boards ................ 5
Making Connections ................. 7
Front Panel .................................. 10
Front Panel Operations ................ 11
Creating a Tie .............................. 11
Viewing Ties
(and Muting Outputs) ................. 12
Saving or Recalling a Preset ....... 12
Locking the Front Panel
(Executive Mode) ....................... 13
Remote Control .......................... 15
Selected SIS Commands ............ 15
Command and Response
Table for SIS Commands ....... 16
Matrix Switchers Control
Program ..................................... 20
Installing the Program ............. 20
LAN port Connection............... 21
Starting the Program ............... 21
Built-in HTML Pages ................... 23
Conguring for Network
Communication ...................... 23
Loading the Start-up Page ...... 24
Maintenance and Modifications .... 27
Removing and Installing
a Board or Blank Panel .............. 27
Removing and Installing
a Power Supply Module............. 29
Removing and Installing
a Fan Module ............................. 31
Specifications Availability
Product specications are available on the Extron website,
www.extron.com.
FOX Matrix 3200 and FOX Matrix 7200 • Contents v
Introduction
WARNING: The ber optic I/O boards of the FOX matrix switchers
output continuous invisible light, which may be harmful to the eyes;
use with caution.
Do not look into the ber optic cable connectors or into the ber
optic cables themselves.
Plug the attached dust caps into the optical transceivers when the
ber cable is unplugged.
AVERTISSEMENT : L'appareil émet une lumière invisible en
continu, à utiliser avec precaution.
Ne regardez pas dans les connecteurs de câble bre optique sur
le panneau arrière ou dans les câbles bre optique eux-mêmes.
Branchez les protections contre la poussière dans l'ensemble
émetteur/récepteur lorsque le câble bre optique est débranché.
This section provides an overview of the Extron FOX Matrix 3200 and
FOX Matrix 7200 and describes their features. Topics that are covered
include:
• About this Guide
• About the FOX Matrix Switchers
About this Guide
NOTE: For more information on any subject in this guide, see the
FOX Matrix 3200 and FOX Matrix 7200 Series User Guide, available
at www.extron.com.
This setup guide helps you easily and quickly set up and congure
your FOX Matrix 3200 and FOX Matrix 7200 switcher. Step by step
instructions show you how to:
• Install the input and output boards
• Connect the hardware
• Perform basic operations
• Use both the front panel controls and selected Simple Instruction
Set (SIS) commands
• Load and start the Matrix Switchers Control Program
• Connect to the built-in HTML pages, which you can use to operate
the switcher
FOX Matrix 3200 and FOX Matrix 7200 • Introduction 1vi FOX Matrix 3200 and FOX Matrix 7200 • Contents
About the FOX Matrix Switchers
MIXING
The FOX Matrix Switchers (see gure 1 for a FOX Matrix 3200 example)
are congurable matrix switchers that distribute optical signals. Fiber
optic I/O boards route signals that are compatible with all Extron
FOX 500, FOXBOX, FOX, FOX 2G, and FOX HD-SDI ber optic product
lines. 3G/HD-SDI/SDI/ I/O boards route 3G, high denition serial digital
interface (HD-SDI), and serial digital interface (SDI) signals. The matrix
switcher routes any input signal to any combination of outputs. An
optical input can be tied to optical outputs, 3G/HD-SDI SDI outputs,
or both and an 3G/HD-SDI SDI input can be tied to 3G/HD-SDI/SDI
outputs, optical outputs, or both. The matrix switcher can route multiple
input/output congurations simultaneously.
NOTES:
• Compatible optical signals are digital signals from 270 Mbs
through 4.25 Gbps that are sent and received via ber optic
small form factor pluggable (SFP) modules.
• The FOX transmitter-to-receiver communications, including the
serial link, occupy one matrix switcher input and output. This
matrix switcher can also support the FOX return (receiver-totransmitter) serial communications, but returning this signal
stream to the transmitter occupies a separate matrix switcher
input and output.
The switcher has two internal, hot-swappable 100 VAC to 240 VAC,
50-60 Hz, 175-watt (FOX Matrix 3200) or 180-watt (FOX Matrix 7200)
power supplies that provide worldwide power compatibility and reliability.
Configurability and Transmission modes
The FOX Matrix Switchers are assembled from individual input/output
(I/O) boards. The switcher can include up to four (FOX Matrix 3200) or
nine (FOX Matrix 7200) I/O boards, each of which supports 8 inputs by
8 outputs. The four types of I/O boards are:
• Singlemode fiber optic 8x8 I/O board
• Multimode fiber optic 8x8 I/O board
• Singlemode pathological fiber optic 8x8 I/O board. This board
addresses the compatibility issues of passing pathological signals
generated from 3G HD-SDI, HD-SDI, and SDI signals over ber optic
systems
• 3G HD-SDI, HD-SDI, and SDI 8x8 I/O board
NOTE: As listed above, three versions of the fiber optic I/O boards
are documented in this manual. They are categorized by the type
of fiber optic cable, multimode or singlemode, which defines the
effective range of transmission:
DISPLAY
FULL/FINE
INPUT
POWER
12V
0.3A MAX
POWER
PHONES
HD SDI HD SDI HD SDI HD SDI
db db db db
0
10
20
30
40
50
EXT
5CH2 6 CH3 7 CH4 8
CH1
REC
CH1
5 CH2 6
PB
HD/SDI IN
REMOTE
EJECT
1(9P) 2(50P) RS-232C
db
0
0
0
0
10
10
10
10
20
20
20
20
30
30
30
30
40
40
40
40
50
50
50
50
L
1-4
IMX
CUE
MONITOR
R
5-8REC
REC
CH3
7 CH4 8 CUE
PB
UNITYVARIABLE
FOX HDSDI
OPTICAL
MODE
12
BUFFERED OUTPUTS
RxTx
FOX 3G HD-SDI
Singlemode
MPEG IMXDigital BETACAMHDCAM
ASSEMBLEINSERT
VIDEO CH1 CH2 CH3 CH3 CUE
TC
00:00:00:00
CHANNEL
CONDITION
F1 F2 F3 F4 F5 F6
HOME
LIST GOOD SHOT MARK TRIM
REC
PREROLL
EDIT
REC/
ERASE
AUDIO
ININOUT
DMC EDIT DELETE
ENTRY
MEMORY
REW
PLAY
F FWD
PREVIEWAUTO EDIT
REVIEW
OUT
FOX HDSDI
POWER
OPTICAL
12V
MODE
0.3A MAX
High Definition
Video System
HDCAM
MULTI
RECORDER
SHUTTLE/VAR
CONTROL
JOG
JOG
VAR
PLAYER
PUSH/
SHUTTLE
SHIFT
ALARM
F
E
O
S
R
R
W
E
KEY INHI
V
A
E
R
R
D
RESET
REC INHI
STANDBY
STOP
HD/SDI IN
POWER
1(9P) 2(50P) RS-232C
PHONES
HD SDI HD SDI HD SDI HD SDI
db db db db
0
0
10
10
20
20
30
30
DISPLAY
40
40
FULL/FINE
50
50
EXT
CH1
5CH2 6 CH3 7 CH4 8
INPUT
MIXING
REC
CH1
5 CH2 6
CH3
PB
UNITYVARIABLE
12
BUFFERED OUTPUTS
RxTx
FOX 3G HD-SDI
Multimode
MPEG IMXDigital BETACAMHDCAM
REMOTE
EJECT
ASSEMBLE INSERT
VIDEO CH1 CH2 CH3 CH3 CUE
TC
db
0
0
0
10
10
10
00:00:00:00
20
20
20
CHANNEL
CONDITION
30
30
30
40
40
40
50
50
50
F1 F2 F3 F4 F5 F6
HOME
LIST GOOD SHOT MARK TRIM
L
1-4
REC/
IMX
CUE
MONITOR
ERASE
R
5-8REC
DMC EDIT DELETE
MEMORY
REC
PREVIEW AUTO EDIT
REVIEW
7 CH4 8 CUE
PB
M
1 - 8
ANAHEIM, CA
S
9 - 16
17 - 24
H
25 - 32
H
100-240V 50/60Hz 1.2A MAX.
RESET
REMOTE
RS-232/RS-422
BI-LEVEL
LAN
CORDS BEFORE SERVICING
DISCONNECT BOTH POWER
TRI-LEVEL
ACT LINK
SWITCH
100-240V 50/60Hz 1.2A MAX.
REFERENCE
FOX Matrix 3200
S
Singlemode
I/O Board
M
Multimode
I/O Board
SDI/HD-SDI
I/O Board
High Definition
Video System
HDCAM
MULTI
RECORDER
SHUTTLE/VAR
CONTROL
JOG
JOG
VAR
PUSH/
PLAYER
SHUTTLE
SHIFT
ALARM
F
E
O
S
R
R
W
E
KEY INHI
V
A
E
R
R
D
RESET
REC
REC INHI
PREROLL
EDIT
AUDIO
ININOUT
STANDBY
ENTRY
REW
PLAY
F FWD
STOP
OUT
OUT
OUT
IN
OUT
OUT
IN
B
A
OUT
OUT
IN
OUT
OUT
IN
B
A
B
AD
E
C
MUTI-RATE SDI INPUTS
B
AD
E
C
MUTI-RATE SDI INPUTS
PRIMARY POWER SUPPLY
REDUNDANT
PRIMARY
Singlemode
Multimode
SDI/HD-SDI
IN
C
IN
C
F
F
OUT
IN
D
OUT
IN
D
H
G
H
G
OUT
IN
OUTINOUT
E
F
OUT
IN
OUTINOUT
E
F
B
AD
E
C
MUTI-RATE SDI OUTPUTS
B
AD
E
C
MUTI-RATE SDI OUTPUTS
REDUNDANT POWER SUPPLY
IN
OUT
IN
G
H
IN
OUT
IN
G
H
H
G
F
H
G
F
POWER
12V
0.3A MAX
HD/SDI IN
FOX 3G HD-SDI
Multimode
POWER
12V
0.3A MAX
FOX 3GHD-SDI
Singlemode
H
ATION
Tx
COMMUNIC
TION
A
Tx
COMMUNIC
FOX HDSDI
OPTICAL
MODE
12
BUFFERED OUTPUTS
RxTx
FOX HDSDI
OPTICAL
MODE
12
HD/SDI IN
BUFFERED OUTPUTS
RxTx
• Singlemode — Very long distance, up to 30 km (18.75 miles)
NOTE: In this figure, the FOX 3G HD-SDI units
are set to bidirectional transceiver mode.
Figure 1. Typical FOX Matrix 3200 application
The Extron proprietary ber optic signal, generated by Extron ber
optic transmitters, can include video, stereo audio, and transmitterto-receiver RS-232 serial communications. The video component of
the signal can be RGB video, Digital Visual Interface (DVI) video, HDMI
video, 3G/HD-SDI/SDI video, or low resolution video, depending on the
transmitter and receiver.
The matrix switcher can be remotely controlled via its Ethernet LAN port
or either of two serial ports, one on the rear panel and one on the front
panel, using either the Windows-based Extron Matrix Switchers Control
• Multimode — Long distance, up to 300 m (984 feet)
By adding or removing I/O boards, you can expand and contract the FOX
Matrix Switchers from an 8-input by 8-output matrix to up to either:
• FOX Matrix 3200 — A 32-input by 32-output matrix
• FOX Matrix 7200 — A 72-input by 72-output matrix
NOTE: On a fiber optic I/O board as delivered from Extron, all
transceiver modules are configured the same: either all multimode
or all singlemode. You can mix multimode and singlemode fiber
optic I/O boards in a FOX matrix switcher, but you must ensure
that you connect the proper transmission mode fiber cables to the
board.
Program or the SIS.
FOX Matrix 3200 and FOX Matrix 7200 • Introduction2 3FOX Matrix 3200 and FOX Matrix 7200 • Introduction
Installation
Location A
AA
AA
BB
This section describes installation of the FOX matrix switchers, including
Rear Panel
connections and features. Topics that are covered include:
• Rear Panel
• Front Panel
A Note on I/O Boards
As shown in gure 2, each I/O board is identied by the input and output
numbers supported by the board position. The transceiver modules on
the I/O boards are identied as A through H.
Output and Input
ANAHEIM, CA
Location A
Input
Figure 2. Arrangement of Inputs and Outputs on the I/O Boards
The board position designators, printed beside the fans, correspond to
the input and output numbers served by that position (1 - 8, 9 - 16, and
so on).
The location designators, A through H, correspond to the transceiver
modules, numbered from left to right, each of which includes an input
and an output.
See gure 2. The input and output numbers supported by the I/O board
in slot 2 (location 9 - 16) are as follows: A = 9, B = 10, C = 11, D = 12,
E = 13, F = 14, G = 15, and H = 16.
I#1
O#1
OUT
IN
1 - 8
A
OUT
IN
9 - 16
A
O#9
17 - 24
I#9
AD
25 - 32
100-240V 50/60Hz 1.2A MAX.
I#26
I#25
O#10
B
I#27
O#2
OUT
B
OUT
B
C
I#28
I#2
O#3
IN
IN
O#11
I#10
E
MUTI-RATE SDI INPUTS
I#29
I#3
O#4
OUT
IN
C
OUT
IN
C
O#12
I#11
F
PRIMARY POWER SUPPLY
I#30
I#31
Location H
Input
G
I#32
I#4
OUT
IN
D
OUT
IN
D
I#12
H
I#5
O#5
O#13
AD
O#6
OUT
IN
OUT
E
OUT
IN
E
O#14
I#13
B
C
C
Slot 1
F
OUT
D
(1-8)
IN
Slot 2
(9-16)
F
Slot 3
No board
installed
Slot 4
(25-32)
O#26
O#25
Location A
Output
ATTENTION:
• Turn off power to the input and output devices, and disconnect
their power cords before making connections.
• Débranchez le produit et les autres appareils.
FOX Matrix 3200 and FOX Matrix 7200 • Installation 54 FOX Matrix 3200 and FOX Matrix 7200 • Introduction
OUT
IN
OPTICAL
2* 1
*
OPTIONAL FOR
RETURN DATA
LINK
LINK
OPTICAL
Transmitting
Unit
Receiving
Unit
FOX Matrix
Switcher
12*
*
OPTIONAL FOR
RETURN DATA
LINK
LINK
ÕÕÎÎ
AA
BBCCDDEEGGHH
IIHHFF
AA
BB
CC
DD
EE
FF
GG
HHHH
II
FAN ASSIMBLY
FAN ASSIMBLY
ANAHEIM, CA
WARNING: This unit outputs continuous invisible light, which
may be harmful to the eyes; use with caution. For additional
safety, plug the attached dust caps into the optical transceivers
when the ber cable is unplugged.
AVERTISSEMENT : L'appareil émet une lumière invisible
en continu, à utiliser avec precaution. Branchez les protections
contre la poussière dans l'ensemble émetteur/récepteur lorsque
le câble bre optique est débranché.
OUT
OUT
IN
1 - 8
1 - 8
OUT
IN
9 - 16
9 - 16
OUT
IN
17 - 24
17 - 24
OUT
IN
25 - 32
25 - 32
OUT
IN
33 - 40
33 - 40
OUT
IN
41 - 48
41 - 48
OUT
IN
49 - 56
49 - 56
AD
57 - 64
57 - 64
AD
65 - 72
65 - 72
DISCONNECT BOTH POWER
CORDS BEFORE SERVICING
REDUNDANT
100-240V
50/60Hz
3.7A MAX.
PRIMARY
100-240V
50/60Hz
3.7A MAX.
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
B
C
MUTI-RATE SDI INPUTS
B
C
MUTI-RATE SDI INPUTS
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
E
F
E
F
PRIMARY POWER SUPPLY
G
G
OUT
OUT
OUT
IN
1 - 8
1 - 8
ANAHEIM, CA
REMOTE
RS-232/RS-422
LAN
OUT
OUT
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
IN
OUT
OUT
IN
OUT
OUT
IN
OUT
OUT
IN
OUT
OUT
IN
OUT
OUT
IN
IN
IN
IN
IN
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
ACT LINK
OUT
9 - 16
9 - 16
OUT
17 - 24
17 - 24
AD
25 - 32
25 - 32
100-240V 50/60Hz 1.2A MAX.
RESET
BI-LEVEL
BI-LEVEL
DISCONNECT BOTH POWER
DISCONNECT BOTH POWER
CORDS BEFORE SERVICING
CORDS BEFORE SERVICING
TRI-LEVEL
TRI-LEVEL
SWITCH
SWITCH
100-240V 50/60Hz 1.2A MAX.
REFERENCE
REFERENCE
OUT
A
IN
OUT
IN
OUT
A
B
C
REDUNDANT
PRIMARY
Figure 4. FOX Matrix 3200 Switcher Rear Panel
Power Supply indicator LEDs (see page 9).
H
Replaceable fans (see Removing and
I
Installing a Fan Module on page 31 to
IN
B
IN
IN
B
MUTI-RATE SDI INPUTS
OUT
IN
C
OUT
IN
C
OUT
IN
C
E
F
PRIMARY POWER SUPPLY
IN
D
OUT
IN
D
OUT
IN
D
H
G
IN
OUT
E
OUT
IN
OUT
E
OUT
IN
OUT
E
B
AD
C
MUTI-RATE SDI OUTPUTS
IN
F
IN
F
IN
F
E
REDUNDANT POWER SUPPLY
OUT
OUT
OUT
F
IN
OUT
IN
G
G
G
H
IN
OUT
IN
H
IN
OUT
IN
H
H
G
replace the fan).
OUT
OUT
C
MUTI-RATE SDI OUTPUTS
C
MUTI-RATE SDI OUTPUTS
IN
OUT
IN
OUT
E
F
E
F
LAN
REMOTE
RS232/RS422
ACT
REDUNDANT POWER SUPPLY
OUT
G
G
OUT
H
H
SWITCH REFERENCE
BI-LEVEL TRI-LEVEL
IN
IN
Making Connections
Fiber optic boards with connectors and
A
LEDs —
NOTES:
• Ensure that you use the proper
ber cable for your I/O board.
Typically, singlemode ber has a
IN
IN
RESET
LINK
yellow jacket and multimode cable
OUT
OUT
IN
OUT
IN
H
H
IN
OUT
IN
B
AD
B
AD
has an orange or cyan jacket.
• The FOX matrix switcher uses one
connector on the block as an input
and the second connector on the
same block as a separate output.
6 FOX Matrix 3200 and FOX Matrix 7200 • Installation 7FOX Matrix 3200 and FOX Matrix 7200 • Installation
Figure 3. FOX Matrix 7200 Switcher Rear Panel
Fiber optic boards with connectors and LEDs (see page 7).
A
3G HD-SDI, HDI-SDI, and SDI boards with connectors (see page 8).
B
Remote port (see page 8).
C
Ethernet port (LAN connector) (see page 8).
D
Reset button and LED (see page 8).
E
Switch Reference connectors (see page 8).
F
Power connectors (see page 9).
G
Input connector — Connect a fiber
Î
optic cable between each Input LC
connector and a FOX 500 Tx or any
other compatible Extron FOX device.
NOTE: Or, for the serial return
(receiver-to-transmitter) function,
connect the far end to the Optical 2
connector on a FOX Rx receiver.
Input LED — See Fiber optic I/O
board LED indications on page 9.
Loading...