ExtremeWireless™ WS-
AP3865e Installation Guide
P/N 9034808-02
March 2017
Copyright © 2017 Extreme Networks, Inc. All Rights Reserved.
Legal Notices
Extreme Networks, Inc., on behalf of or through its wholly-owned subsidiary, Enterasys Networks, Inc., reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made.
The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice.
Trademarks
Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries.
All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners.
For additional information on Extreme Networks trademarks, please see: www.extremenetworks.com/company/legal/trademarks/
Support
For product support, including documentation, visit: www.extremenetworks.com/support/
i
Hazardous Substances
This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
European Waste Electrical and Electronic Equipment (WEEE) Notice
In accordance with Directive 2011/65/EU of the European Parliament on waste electrical and electronic equipment (WEEE):
1.The symbol above indicates that separate collection of electrical and electronic equipment is required and that this product was placed on the European market after August 13, 2005, the date of enforcement for Directive 2011/65/EU.
2.When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It must be collected and treated separately.
3.It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment.
4.It is the users’ responsibility to utilize the available collection system to ensure WEEE is properly treated.
For information about the available collection system, please contact Enterasys Customer Support at +353 61 705500 (Ireland).
ii
Supplement to Product Instructions
|
|
|
|
|
(Hazardous Substance) |
|
||
|
|
|
|
|
|
|
||
(Parts) |
|
|
|
|
|
|
||
|
||||||||
|
3E |
+J |
&G |
&U |
3%% |
3%'( |
||
|
|
|||||||
(Metal Parts)
(Circuit Modules)
(Cables & Cable Assemblies)
(Plastic and Polymeric parts)
(Circuit Breakers)
SJ/T 11363-2006 |
|
Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T 11363-2006 standard.
SJ/T 11363-2006 |
|
Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T 11363-2006 standard.
|
|
This table shows where these substances may be found in the supply chain of Enterasys’ electronic information products, as of the date of sale of the enclosed product. Note that some of the component types listed above may or may not be a part of the enclosed product.
|
|
|
|
|
|
|
|
The Environmentally Friendly Use Period (EFUP) for all enclosed products and their parts are per the symbol shown here, unless otherwise marked. Certain parts may have a different EFUP (for example, battery modules) and so are marked to reflect such. The Environmentally Friendly Use Period is valid only when the product is operated under the conditions defined in the product manual.
iii
Enterasys Networks, Inc. Firmware License Agreement
BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT,
CAREFULLY READ THIS LICENSE AGREEMENT.
This document is an agreement ("Agreement") between the end user ("You") and Enterasys Networks, Inc., a wholly-owned subsidiary of Extreme Networks, Inc., on behalf of itself and its Affiliates (as hereinafter defined) ("Enterasys"), that sets forth Your rights and obligations with respect to the Enterasys software program/firmware (including any accompanying documentation, hardware or media) (collectively, the "Program") in the package and prevails over any additional, conflicting or inconsistent terms and conditions appearing on any purchase order or other document submitted by You. "Affiliate" means any person, partnership, corporation, limited liability company, other form of enterprise that directly or indirectly through one or more intermediaries, controls, or is controlled by, or is under common control with the party specified.
This Agreement constitutes the entire understanding between the parties, with respect to the subject matter of this Agreement. The Program may be contained in firmware, chips or other media.
BY INSTALLING OR OTHERWISE USING THE PROGRAM, YOU REPRESENT THAT YOU ARE AUTHORIZED TO ACCEPT THESE TERMS ON BEHALF OF THE END USER (IF THE END USER IS AN ENTITY ON WHOSE BEHALF YOU ARE AUTHORIZED TO ACT, “YOU” AND “YOUR” SHALL BE DEEMED TO REFER TO SUCH ENTITY) AND THAT YOU AGREE THAT YOU ARE BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES, AMONG OTHER PROVISIONS, THE LICENSE, THE DISCLAIMER OF WARRANTY AND THE LIMITATION OF LIABILITY. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT OR ARE NOT AUTHORIZED TO ENTER INTO THIS AGREEMENT, ENTERASYS IS UNWILLING TO LICENSE THE PROGRAM TO YOU AND YOU AGREE TO RETURN THE UNOPENED PRODUCT TO ENTERASYS OR YOUR DEALER, IF ANY, WITHIN TEN (10) DAYS FOLLOWING THE DATE OF RECEIPT FOR A FULL REFUND.
IF YOU HAVE ANY QUESTIONS ABOUT THIS AGREEMENT, CONTACT EXTREME NETWORKS, LEGAL DEPARTMENT AT (408) 579-2800.
You and Enterasys agree as follows:
1.LICENSE. You are granted a revocable, non-exclusive and non-transferable right to use only one (1) copy of the Program provided in this package subject to the terms and conditions of this Agreement.
2.RESTRICTIONS. Except as otherwise authorized in writing by Enterasys, You may not, nor may You permit any third party to:
(a)Reverse engineer, decompile, disassemble or modify the Program, in whole or in part, including for reasons of error correction or interoperability, except to the extent expressly permitted by applicable law and to the extent the parties shall not be permitted by that applicable law, such rights are expressly excluded. Information necessary to achieve interoperability or correct errors is available from Enterasys upon request and payment of Enterasys’ applicable fee.
(b)Incorporate the Program in whole or in part, in any other product or create derivative works based on the Program, in whole or in part.
(c)Publish, disclose, copy reproduce or transmit the Program, in whole or in part.
(d)Assign, sell, license, sublicense, rent, lease, encumber by way of security interest, pledge or otherwise transfer the
Program, in whole or in part.
(e)Remove any copyright, trademark, proprietary rights, disclaimer or warning notice included on or embedded in any part of the Program.
iv
3.APPLICABLE LAW. This Agreement shall be interpreted and governed under the laws and in the state and federal courts of the State of California without regard to its conflicts of laws provisions. You accept the personal jurisdiction and venue of the Superior Court of California in Santa Clara County or the United States District Court for the Northern District of California in San Jose, California. None of the 1980 United Nations Convention on the Limitation Period in the International Sale of Goods, and the Uniform Computer Information Transactions Act shall apply to this Agreement.
4.EXPORT RESTRICTIONS. You acknowledge and agree that the Program and its accompanying materials/documentation are subject to the export control laws and regulations of the United States, including but not limited to the Export Administration Regulations (EAR), the International Traffic in Arms Regulations (ITAR), and the sanction regimes of the U.S. Department of Treasury, Office of Foreign Assets Control's Foreign Assets Control Regulations (FACR). You agree that You will comply with these laws and regulations.
You agree that You will not, without prior U.S. Government authorization, export, reexport, or transfer the Program, either directly or indirectly, to any country subject to a U.S. trade embargo or sanction (e.g. Cuba, N. Korea, Iran, Syria, Sudan) or to any resident or national of said countries, or to any person, organization, or entity on any of the restricted parties lists maintained by the U.S. Departments of State, Treasury, or Commerce. In addition, You agree that You will not export, reexport or transfer the Program to any end-user engaged in activities, or for any end-use, directly or indirectly related to the design, development, production, use, or stockpiling of weapons of mass destruction, e.g. nuclear, chemical, or biological weapons, and the missile technology to deliver them.
5.UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The enclosed Program (i) was developed solely at private expense; (ii) contains “restricted computer software” submitted with restricted rights in accordance with section 52.227-19 (a) through (d) of the Commercial Computer Software-Restricted Rights Clause and its successors, and (iii) in all respects is proprietary data belonging to Enterasys, its Affiliates and/or its suppliers. For Department of Defense units, the Program is considered commercial computer software in accordance with DFARS section 227.7202-3 and its successors, and use, duplication, or disclosure by the U.S. Government is subject to restrictions set forth herein.
6.DISCLAIMER OF WARRANTY. EXCEPT FOR THOSE WARRANTIES EXPRESSLY PROVIDED TO YOU IN WRITING BY ENTERASYS, ENTERASYS DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT WITH RESPECT TO THE PROGRAM. IF THE IMPLIED WARRANTIES MAY NOT BE DISCLAIMED BY APPLICABLE LAW, THEN ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THIRTY (30) DAYS AFTER DELIVERY OF THE PROGRAM TO YOU.
7.LIMITATION OF LIABILITY. IN NO EVENT SHALL ENTERASYS OR ITS AFFILIATES AND SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS, PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR RELIANCE DAMAGES, OR OTHER LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM, EVEN IF ENTERASYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS FOREGOING LIMITATION SHALL APPLY REGARDLESS OF THE CAUSE OF ACTION UNDER WHICH DAMAGES ARE SOUGHT.
NOTWITHSTANDING THE FOREGOING, THE CUMULATIVE LIABILITY OF ENTERASYS TO YOU FOR ALL CLAIMS RELATING TO THE PROGRAM, IN CONTRACT,
v
TORT OR OTHERWISE, SHALL NOT EXCEED THE TOTAL AMOUNT OF FEES PAID TO ENTERASYS BY YOU FOR THE RIGHTS GRANTED HEREIN.
8.AUDIT RIGHTS. You hereby acknowledge that the intellectual property rights associated with the Program are of critical value to Enterasys and its Affiliates, and, accordingly, You hereby agree to maintain complete books, records and accounts showing: (i) license fees due and paid, and (ii) the use, copying and deployment of the Program. You also grant to Enterasys and its authorized representatives, upon reasonable notice, the right to audit and examine during Your normal business hours, Your books, records, accounts and hardware devices upon which the Program may be deployed to verify compliance with this Agreement, including the verification of the license fees due and paid to Enterasys and the use, copying and deployment of the Program. Enterasys' right of examination shall be exercised reasonably, in good faith and in a manner calculated to not unreasonably interfere with Your business. In the event such an audit discovers any non-compliance with this Agreement, including copies of the Program made, used or deployed in breach of this Agreement, You shall promptly cease such unauthorized conduct, pay to Enterasys the appropriate license fees and be subject to any other available claim from Enterasys pursuant to applicable law. Enterasys reserves the right, to be exercised in its sole discretion and without prior notice, to terminate this Agreement, including the license, effective immediately, for failure to comply with this Agreement. Upon any such termination, You shall immediately cease all use of the Program and shall return to Enterasys the Program and all copies of the Program.
9.OWNERSHIP. This is a license agreement and not an agreement for sale. You acknowledge and agree that the Program constitutes trade secrets and/or copyrighted material of Enterasys and/or its suppliers. You agree to implement reasonable security measures to protect such trade secrets and copyrighted material. All right, title and interest in and to the Program shall remain with Enterasys and/or its Affiliates and suppliers. All rights not specifically granted to You shall be reserved to Enterasys.
10.TRADEMARKS. ENTERASYS, ENTERASYS NETWORKS, ENTERASYS SECURE NETWORKS, NETSIGHT, ENTERASYS NETSIGHT, and any logos associated therewith, are trademarks or registered trademarks of Enterasys Networks, Inc., in the United States and/or other countries. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. For more information on Enterasys and Extreme trademarks, see: www.extremenetworks.com/about-extreme/trademarks.aspx.
All other product names mentioned in Program may be trademarks or registered trademarks of their respective companies.
11.ENFORCEMENT. You acknowledge and agree that any breach of this Agreement by You may cause Enterasys irreparable damage for which recovery of money damages would be inadequate, and that Enterasys may be entitled to seek timely injunctive relief to protect Enterasys’ rights under this Agreement in addition to any and all remedies available at law.
12.ASSIGNMENT. You may not assign, transfer or sublicense this Agreement or any of Your rights or obligations under this Agreement, except that You may assign this Agreement to any person or entity that acquires substantially all of Your stock assets. Enterasys may assign this Agreement in its sole discretion to anyone or any entity without Your consent and without notice, including assigning this Agreement to its parent company, Extreme Networks, Inc. This Agreement shall be binding upon and inure to the benefit of the parties, their legal representatives, permitted transferees, successors and assigns as permitted by this Agreement. Any attempted assignment, transfer or sublicense in violation of the terms of this Agreement shall be void and a breach of this Agreement.
vi
13.WAIVER. A waiver by Enterasys of a breach of any of the terms and conditions of this Agreement must be in writing and will not be construed as a waiver of any subsequent breach of such term or condition. Enterasys’ failure to enforce a term upon Your breach of such term shall not be construed as a waiver of Your breach or prevent enforcement on any other occasion.
14.SEVERABILITY. In the event any provision of this Agreement is found to be invalid, illegal or unenforceable, the validity, legality and enforceability of any of the remaining provisions shall not in any way be affected or impaired thereby, and that provision shall be reformed, construed and enforced to the maximum extent permissible. Any such invalidity, illegality, or unenforceability in any jurisdiction shall not invalidate or render illegal or unenforceable such provision in any other jurisdiction.
15.TERMINATION. Enterasys may terminate this Agreement immediately upon Your breach of any of the terms and conditions of this Agreement. Upon any such termination, You shall immediately cease all use of the Program and shall return to Enterasys the Program and all copies of the Program.
vii
viii
|
Contents |
About This Guide |
|
Who Should Use This Guide ............................................................................................................................. |
xi |
How to Use This Guide ...................................................................................................................................... |
xi |
Related Documents .......................................................................................................................................... |
xii |
Typographical Conventions .............................................................................................................................. |
xii |
Chapter 1: Introduction |
|
WS-AP3865e Overview .................................................................................................................................. |
1-1 |
WS-AP3865e LED Indicators ................................................................................................................... |
1-3 |
Antennas .................................................................................................................................................. |
1-4 |
External Antenna Connectors .................................................................................................................. |
1-4 |
LAN Ports ................................................................................................................................................. |
1-4 |
Chapter 2: Installation |
|
Package Contents .......................................................................................................................................... |
2-1 |
Unpacking the WS-AP3865e ................................................................................................................... |
2-1 |
Separately Ordered Components ................................................................................................................... |
2-2 |
WS-AP3865e Installation Procedures ............................................................................................................ |
2-2 |
Removing the AP Cover ........................................................................................................................... |
2-3 |
Attaching the Mounting Bracket ............................................................................................................... |
2-4 |
Mounting the WS-AP3865e to a Wall ....................................................................................................... |
2-4 |
Mounting the WS-AP3865e to a Pole ...................................................................................................... |
2-5 |
Attaching Antennas .................................................................................................................................. |
2-7 |
LAN 1/LAN 2 Connections ....................................................................................................................... |
2-7 |
Installing the Cable Gland Adapter Assembly .................................................................................... |
2-8 |
Weatherproofing the AP3865e Connections ................................................................................................ |
2-11 |
Weatherproofing the LAN1 and LAN2 glands ......................................................................................... |
2-12 |
Weatherproofing the Antenna ................................................................................................................ |
2-13 |
Forming a Drip Loop for AP3865e Cables ............................................................................................. |
2-14 |
Ground Connection ................................................................................................................................ |
2-15 |
Appendix A: Specifications |
|
Appendix B: Regulatory Information |
|
WS-AP3865e .................................................................................................................................................. |
B-1 |
WS-AP3865e External Antenna AP ......................................................................................................... |
B-1 |
United States ............................................................................................................................................ |
B-1 |
FCC Declaration of Conformity Statement ........................................................................................ |
B-1 |
USA Conformance Standards ........................................................................................................... |
B-2 |
FCC RF Radiation Exposure Statement............................................................................................ |
B-3 |
External Antennas ............................................................................................................................. |
B-3 |
Professional Installation Notice ......................................................................................................... |
B-3 |
Canada ..................................................................................................................................................... |
B-3 |
Industry Canada Compliance Statement........................................................................................... |
B-3 |
Canada Conformance Standards ...................................................................................................... |
B-4 |
External Antennas ............................................................................................................................. |
B-4 |
European Community .............................................................................................................................. |
B-4 |
Declaration of Conformity in Languages of the European Community.............................................. |
B-6 |
European Conformance Standards ................................................................................................... |
B-7 |
External Antennas ............................................................................................................................. |
B-8 |
Conditions of use in the European Community ................................................................................. |
B-8 |
ix
European Spectrum Usage Rules ..................................................................................................... |
B-9 |
Certifications of Other Countries .................................................................................................................. |
B-10 |
WS-AP3865e Approved External Antennas ........................................................................................... |
B-11 |
Tables
1-1 |
WS-AP3865e LED Status Indicators .................................................................................................. |
1-3 |
2-1 |
WS-AP3865e Supplied Components ................................................................................................. |
2-1 |
A-1 |
Specifications for the WS-AP3865e ................................................................................................... |
A-1 |
B-1 |
European Spectrum Usage Rules ...................................................................................................... |
B-9 |
B-2 |
List of Approved Antennas - WS-AP3865e ...................................................................................... |
B-11 |
Figures
1-1 |
WS-AP3865e Front View.................................................................................................................... |
1-2 |
1-2 |
WS-AP3865e Top/Bottom View ......................................................................................................... |
1-2 |
1-3 |
WS-AP3865e LEDs ............................................................................................................................ |
1-3 |
2-1 |
AP Cover ............................................................................................................................................ |
2-3 |
2-2 |
Mounting Bracket Orientation ............................................................................................................. |
2-4 |
2-3 |
Mounting the WS-AP3865e to a Wall ................................................................................................. |
2-5 |
2-4 |
Pole Mount Orientation....................................................................................................................... |
2-6 |
2-5 |
.WS-AP3865e Pole Mount Option - Vertical Position ......................................................................... |
2-6 |
2-6 |
Installing Terminator Caps.................................................................................................................. |
2-7 |
2-7 |
RJ45 Cable Gland Adapter Assembly ................................................................................................ |
2-8 |
2-8 |
Weatherproofing the AP3865 Antenna............................................................................................. |
2-12 |
2-9 |
Drip Loop for the WS-AP3865e ........................................................................................................ |
2-13 |
2-10 |
WS-AP3865e Ground Terminal Location ......................................................................................... |
2-14 |
x
About This Guide
The guide describes how to mount and connect cables to the IdentiFi Wireless Outdoor Access Point WS AP3865e. In addition, this guide provides information on the product certifications and national approvals for the WS AP3865e.
Note: This guide does not provide information on configuration of the WS-AP3865e. For information on how to configure the WS-AP3865e, see the IdentiFi Wireless Software User Guide.
Who Should Use This Guide
Electrical Hazard: Only qualified personnel should install or service this unit.
Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a esta unida.
Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden.
This product should be installed and serviced by a qualified licensed technician, electrician, or electrical maintenance person familiar with its operation and the hazards involved. Proper installation, which includes wiring, mounting, fusing or other over current protection and grounding, can reduce the chance of electric shocks, fires, or explosion in this product or products used within this product.
How to Use This Guide
Read through this guide completely to familiarize yourself with its contents and to gain an understanding of the features and capabilities of the WS AP3865e. A general working knowledge of data communications networks is helpful when setting up this module.
This preface provides an overview of this guide, and a brief summary of each chapter; defines the conventions used in this document; and instructs how to obtain technical support from Extreme Networks. To locate information about various subjects in this guide, refer to the following table.
For... |
Refer to... |
|
|
An overview of the WS-AP3865e features. |
Chapter 1, Introduction |
|
|
Instructions to mount the WS-AP3865e, attach antennas, |
|
connect cables, and connect power. Instructions are also |
|
included to mount and connect the WS-AP3865e Power |
Chapter 2, Installation |
Supply. |
|
|
|
Specifications, environmental requirements, and physical |
|
properties of the WS-AP3865e and WS-AP3865e Power |
Appendix A, Specifications |
Supply. |
|
|
|
Regulatory certifications and national approvals. |
Appendix B, Regulatory Information |
|
|
IdentiFi Wireless WS-AP3865e Installation Guide xi
Related Documents
Related Documents
The manuals listed below can be obtained from the World Wide Web in Adobe Acrobat Portable Document Format (PDF) at the following site:
https://extranet.enterasys.com/downloads/
•IdentiFi Wireless AP External Antenna Site Preparation and Installation Guide
•IdentiFi Wireless Software User Guide
Typographical Conventions
The following typographical conventions and icons are used in this document.
blue type |
Indicates a hypertext link. When reading this document online, click the text in blue to go to |
||||||
|
|
|
|
|
|
|
the referenced figure, table, or section. |
|
|
||||||
Lowercase x |
Indicates the general use of an alphanumeric character (for example, 6x1xx, the x’s |
||||||
|
|
|
|
|
|
|
indicate a combination of numbers or letters). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: Calls the reader’s attention to any item of information that may be of special |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
importance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Caution: Contains information essential to avoid damage to the equipment. |
|
|
|
|
|
|
|
Precaución: Contiene información esencial para prevenir dañar el equipo. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Achtung: Verweißt auf wichtige Informationen zum Schutz gegen Beschädigungen. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Warning: Warns against an action that could result in personal injury or death. |
|
|
|
|
|
|
|
Advertencia: Advierte contra una acción que pudiera resultar en lesión corporal o la |
|
|
|
|
|
|
|
muerte. |
|
|
|
|
|
|
|
Warnhinweis: Warnung vor Handlungen, die zu Verletzung von Personen oder gar |
|
|
|
|
|
|
|
Todesfällen führen können! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electrical Hazard: Warns against an action that could result in personal injury or death. |
|
|
|
|
|
|
|
Riesgo Electrico: Advierte contra una acción que pudiera resultar en lesión corporal o la |
|
|
|
|
|
|
|
muerte debido a un riesgo eléctrico. |
|
|
|
|
|
|
|
Elektrischer Gefahrenhinweis: Warnung vor sämtlichen Handlungen, die zu Verletzung |
|
|
|
|
|
|
|
von Personen oder Todesfällen – hervorgerufen durch elektrische Spannung – führen |
|
|
|
|
|
|
|
können! |
|
|
|
|
|
|
|
|
xii About This Guide
1
Introduction
This chapter provides general information about the IdentiFi Wireless Outdoor Access Point WS AP3865e.
For information about... |
Refer to page... |
|
|
WS-AP3865e Overview |
1-1 |
|
|
WS-AP3865e LED Indicators |
1-3 |
|
|
Antennas |
1-4 |
|
|
External Antenna Connectors |
1-4 |
|
|
LAN Ports |
1-4 |
|
|
WS-AP3865e Overview
The WS AP3865e (see Figure 1 1 on page 1 2) enables you to extend your wireless LAN beyond the boundaries of indoor locations. They are resistant to harsh outdoor conditions and extreme temperatures. Using the advanced full mesh wireless distribution feature of the wireless LAN, the WS AP3865e can extend your wireless LAN to outdoor locations without Ethernet cabling. A mounting bracket is available to enable quick and easy mounting of the WS AP3865e to walls, rails, and poles.
The WS AP3865e is an 802.11ac AP that supports 802.11a/802.11g and 802.11b legacy devices. It is delivered in a rugged enclosure. The WS AP3865e supports a variety of antennas, providing range and coverage versatility.
The WS AP3865e interoperates fully with the wireless LAN, including support for wireless VoWLAN, branch office mode, availability and mobility features.
IdentiFi Wireless WS-AP3865e Installation Guide 1-1
WS-AP3865e Overview
Figure 1-1 WS-AP3865e Front View
The following view (see Figure 1 2) illustrate the connections to the WS AP3865e.
Figure 1-2 WS-AP3865e Top/Bottom View
1 |
Radio 2 |
- Left Antenna (2.4 GHz) |
5 |
LAN 1 |
Port (POE Input) |
|
2 |
Radio 1 |
- Middle Antenna (5.0 GHz) |
6 |
Radio 2 |
- Middle Antenna (2.4 GHz) |
|
3 |
Radio 2 |
- Right Antenna (2.4 GHz) |
7 |
LAN 2 |
Port (Pwr Out) |
|
4 |
Radio 1 |
- Left Antenna (5.0 GHz) |
8 |
Radio 1 |
- Right Antenna (5.0 GHz) |
|
Note: The WS-AP3865e provides six external antenna ports. The network administrator determines which antenna port will be used based on the external antenna selected. The WS-AP3865e can also be configured to select the antenna that provides the best possible data transmission (diversity).
1-2 Introduction
Loading...