Exibel 38-4250, 38-4251 User Manual [se]

Universal Phone Holder

Universalhållare · Universalholder · Yleispidike · Universalhalterung

Art.no.

38-4250

38-4251

Ver. 20130426

English 2
Svenska 4
Norsk 6
Suomi 8
Deutsch 10

English

Universal Phone Holder

Art. no 38-4250, 38-4251

Please read the entire instruction manual before using the product and save it for
future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. If you have any questions regarding
technical problems please contact Customer Services.

Exibel Universal Phone Holder

Extra-wide holder, adjustable approx. 40–110 mm. Swivel mount, perfect for using
a “smartphone” as a sat nav. Equipped with a flexible arm and a suction cup for
attaching to a windscreen. Compatible with most phones, MP3 players and sat navs.

Contents

• Flexible arm with suction cup

• Universal holder for mobile phones, sat navs, etc.

• Instruction manual

Description

5

1. Side clamps

2. Foldable feet

3. Clamp release button

4. Attachment for arm

5. Swivel attachment

6. Flexible arm

7. Locking lever

8. Cup release button

9. Pull tab

10. Suction cup

4

3

6

7

8

2

1

2

9

10

Assembly

1. Line the lug on the cradle’s arm attachment (4) up with the slot in the arm’s swivel
attachment (5) and push the two pieces together.

2. Clean the surface of the glass where the suction cup (10) is to be mounted and
remove the plastic film from the base of the suction cup.

3. Lift the locking lever (7) and press the suction cup against the clean glass surface.
Press down the locking lever completely until the suction cup is attached to
the glass surface.

4. Bend the flexible arm to the desired position. Adjust the holder’s horizontal angle
by twisting the holder.

5. Push the clamp release button (3) to open the side clamps.

6. Place the mobile phone (max. width 110 mm) in the middle of the holder and
carefully close the side clamps until the mobile phone is securely fastened.
The feet can be opened out to support the bottom of the phone if desired.

7. To remove the phone: Hold the phone with one hand whilst pushing the clamp
release button (3).

8. Remove the arm from the surface of the glass by pushing in the cup release
button (8) and then pulling the tab (9) up until the suction cup comes free.

Disposal

Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.

Specifications

Length of arm 16 cm (38-4250)
27 cm (38-4251)

Max phone width 110 mm
Operating temp. -20–70 ºC

English

3

Universalhållare

Art. nr 38-4250, 38-4251

Läs igenom hela bruksanvisningen före användning och spara den sedan för framtida
bruk. Vi reserverar oss för ev. text- och bildfel samt ändringar av tekniska data.
Vid tekniska problem eller andra frågor, kontakta vår kundtjänst (se adressuppgifter

Svenska

på baksidan).

Universalhållare Exibel

Extra bred hållare, justerbar ca 40-110 mm. Vridbar, perfekt om du använder din
smartphone som navigator. Försedd med böj- och ställbar arm med kraftig sugpropp
för montering mot vindrutan. Passar de flesta telefoner, mp3-spelare och navigatorer.

Förpackningen innehåller

• Flexibel arm med sugpropp

• Universalhållare för mobiltelefon, navigator etc.

• Bruksanvisning

Beskrivning

5

1. Sidoklämmor

2. Vikbara bottenstöd

3. Frigöringsknapp

4. Fäste för arm

5. Vridbart fäste

6. Flexibel arm

7. Låsreglage

8. Öppningsknapp

9. Dragflik

10. Sugkopp

4

3

6

7

8

2

1

4

9

10