ETC UFR2-LV Datasheet
®
Unison Foundry® 0-10V Dimming ControllerETC
Foundry Distributed Power Series
GENERAL INFORMATION
Unison Foundry 0-10V Dimming Controller offers DMX controlled,
fully-rated 20-Amp relays with fully isolated 0-10V dimming for direct
control of compatible LED drivers and fluorescent dimming ballasts.
The Controller mounts to an electrical junction box.
APPLICATIONS
• Arena and stadium suites
• Office buildings
• Conference and meeting rooms
• Healthcare facilities
• Houses of worship
• Classrooms
• Hospitality and restaurants
• Retail
FEATURES
• Switched power control of two circuits with 0-10V dimming
• 20A fully-rated relays for use with general purpose, tungsten,
fluorescent and LED loads
• Supports plug loads
• Fully isolated 0-10V dimming outputs
• 120/277VAC power input
• DMX controlled and RDM configurable
GENERAL
• UL and cUL LISTED
• Rated for plenum use
ORDERING INFORMATION
Foundry 0-10V Dimming Controller
MODEL DESCRIPTION
UFR2-LV Dual Zone DMX Relay with 0-10V
FOUNDRY FAMILY OF PRODUCTS
Foundry Distributed Product Series
MODEL DESCRIPTION
UFR2 Dual Zone DMX Relay
UFR2-LV Dual Zone DMX Relay with 0-10V
UFD 600W 120V DMX Dimmer
UFD-277 600W 277V DMX Dimmer
Foundry Mini Panel Product Series
MODEL DESCRIPTION
UFMP4 4 Zone Mini Panel
UFMP8 8 Zone Mini Panel
1 of 3
Unison Foundry 0-10V Dimming ControllerETC
Foundry Distributed Power Series
SPECIFICATIONS
FUNCTIONAL
• Control for individual fixtures, zone power and 0-10V dimming for fluorescent ballasts and LED drivers
• Supports USITT DMX512-A (ANSI E1.11)
• Supports RDM (ANSI E1.20)
MECHANICAL
• Constructed of injection-molded ABS plastic
• Button interface and LED indicators for configuration
• Half-inch conduit knockout mounted
• Mains-voltage wiring exits through knockout mount
• 0-10V dimming control wiring exits through knockout mount
• DMX wiring connects to side of controller
• Mains power input connections:
- 12 AWG Hot - Black
- 14 AWG Neutral - White
• Relay output connections:
- Zone 1, 12 AWG - Red
- Zone 2, 12 AWG - Red/White
• 0-10V dimming output connections:
- Zone 1, 18 AWG - Violet and Gray
- Zone 2, 18 AWG - Violet/White and Gray/White
• Optional mounting plate available for applications that require low-voltage wiring to be in conduit
ELECTRICAL
• 120V-277V, 50/60Hz power input
• Normally Open (NO) 20-amp fully-rated relay
• Supports lighting and plug loads
• 0-10VDC control rated for up to 100mA sink per output
- 0-10V connections are fully isolated from ground to 2500V RMS
• UL and cUL LISTED
- Conforms to UL 508 and UL 2043
DMX INPUT PORT
• Optically-isolated from Controller electronics
• Withstands fault voltages of up to 250VAC
• Integrated DMX/RDM termination
CONFIGURATION
• Remote configuration available via RDM controllers including:
- ETC DMX/RDM gateway networked to a device running ETC Net3 Concert software
- ETC control console with RDM functionality
- 3rd party configuration and control products
• Manual configuration of the starting DMX address on the controller
THERMAL
• Ambient room temperature: 0 to 50°C
• Ambient humidity: 5 to 95% non-condensing
2 of 3
Loading...