The Echo Phase-Adaptive Dimmer provides reverse- or forward- phase
dimming for loads up to 600 watts. It is compatible with all Echo
control products, including daylight and occupancy sensors and
manual control stations, providing flexibility and energy savings.
APPLICATIONS
• Houses of worship
• Education
• Hospitality
• Healthcare facilities
• Office buildings
• Conference rooms
• Meeting rooms
• Retail
FEATURES
• Single-channel, 600-watt dimmer
• Forward or Reverse-phase operations
• 120V or 277V power input
• Plug and Play: ready to go out of the box, no software or
external programming required
• Supports Unison Echo control stations and responsive controls
• EchoConnect
freedom to put station where you need them
- Up to 16 Echo control products
- Up to 16 Echo output products
- Up to 500 meters (1,640 feet) of control-wire per system
GENERAL
• UL and cUL LISTED
• Rated for plenum use
• Supports Demand Response via EchoConnect
®
: Two-wire topology-free system gives you the
ORDERING INFORMATION
Echo Line Voltage Dimmer
MODELDESCRIPTION
ELVD-G2600-Watt Phase Adaptive Dimmer (120V)
ELVD-277-G2600-Watt Phase Adaptive Dimmer (277V)
Echo Power Requirements
EchoConnect:One unit of output power
Auxiliary Power:Not required
Echo Presets
Supports 16 Echo Presets
1 of 6
Unison Echo Phase-Adaptive DimmerETC
Echo Distributed Power Series
SPECIFICATIONS
FUNCTIONAL
• Control individual fixtures or power for tungsten, line-voltage LED and other general-purpose loads
• Supports loads up to 600 watt loads
• Supports minimum loads of 1 watt
• Plug and Play: ready to go out of the box, no software or external programming required
• Interacts with Echo Responsive Controls and Stations
MECHANICAL
• Constructed of injection-molded ABS plastic
• Button interface and LED indicator per zone for configuration
• Rotary dials for selection of space and zone number
• Half-inch conduit knockout mounted
• Mains-voltage wiring exits through knockout mount
• EchoConnect wiring exits through side of controller
• MicroSD for field software upgrades
• Optional mounting plate available for applications that require low-voltage wiring to be in conduit
• External heatsink
• Mains power input:
- 12 AWG Hot - Black (120V), Brown (277V)
- 14 AWG Neutral - White
- 12 AWG Ground - Green/Yellow
• Dimmed output:
- 12 AWG - Red
ELECTRICAL
• 120V or 277VAC, 50/60Hz power input
• Phase-adaptive, default reverse phase
• 600W resistive or electronic load capacity
• 300W magnetic load capacity (120V only)
- Magnetic transformers must be properly loaded to their rated current
- Use care when retrofitting magnetic transformers with LED loads to ensure proper loading
• EchoConnect Class 2 control network
- Topology-free wiring using Belden 8471 or equivalent and one #18 ESD drain wire
- Wiring may be bus, loop, homerun or any combination of these
• Up to 500 meters (1640 feet) of control wiring per system
• Optional Cat5/5e wiring using Belden 1583A or equivalent
- Requires optional Cat5 termination accessories
• UL and cUL LISTED
• Conforms to UL 508 and UL 2043
THERMAL
• Ambient room temperature: -10 to 45°C / 14 to 113°F
• Ambient humidity: 5 to 95% non-condensing
2 of 6
ECHO FAMILY OF PRODUCTS
Unison Echo Phase-Adaptive DimmerETC
Echo Distributed Power Series
EchoConnect Power Supplies
MODELDESCRIPTION
E-SPS6U Room Station Power Supply, Knockout Mount
E-SPS-DIN16U DIN rail Station Power Supply with 24V Aux
E-SPM16U DRd Station Power Module
E-SPM-A16U DRd Station Power Module with 24V Aux
E-SPM-RM16U Rack-Mount Station Power Module Aux
E-SPM-RM-A16U Rack-Mount Station Power Module 24V Aux
E-SPM-WM16U Wall-Mount Station Power Module
E-SPM-WM-A16U Wall-Mount Station Power Module 24V Aux
E-APS24V Aux Power Supply, Knockout Mount
Echo Stations
MODELDESCRIPTION
E1001Inspire One Button Station
E1002Inspire Two Button Station
E1004Inspire Four Button Station
E1006Inspire Six Button Station
E1008Inspire Eight Button Station
E1104Inspire Four Button with Fader Station
EPS05Echo Preset Station - 5 Button
EPS10Echo Preset Station - 10 Button
EPSLOEcho Lockout Station
E-ATCEcho TimeClock
Echo Responsive Controls
MODELDESCRIPTION
ELSLight Sensor
EOCCCeiling-Mount PIR Occupancy Sensor
EVACCeiling-Mount PIR Vacancy Sensor
E-DOC-CCeiling-Mount Dual Tech Occupancy Sensor
E-DVAC-CCeiling-Mount Dual Tech Vacancy Sensor
E-DOC-WWall-Mount Dual Tech Occupancy Sensor
E-DVAC-WWall-Mount Dual Tech Vacancy Sensor
E-DOC-SM1Switch-Mount Dual Tech Sensor - One Button
E-DOC-SM2Switch-Mount Dual Tech Sensor - Two Button
Echo Interfaces
MODELDESCRIPTION
EACCEchoAccess Interface
EEBEcho Expansion Bridge
EDMXCEcho DMX Scene Controller
EEIEcho-Echofl ex Interface
ECIIEcho Contact Input Interface
ECOIEcho Contact Output Interface
EDRIEcho Demand Response Interface
Zone Controllers
MODELDESCRIPTION
ERC-G2One Zone Relay Controller
EDRC-G2Two Zone Relay Controller
ELD-G2One Zone 0-10V Controller
EDLD-G2Two Zone 0-10V Controller
ESSC-G2One Zone SmartSpace Controller
EDSSC-G2Two Zone SmartSpace Controller
ELVD-G2600-Watt Phase Adaptive Dimmer
ELVD-277-G2600-Watt Phase Adaptive Dimmer- 277V
Room Controllers
MODELDESCRIPTION
ERMC4-G2Four Zone Room Controller
ERMCT4-G2Four Zone Room Controller with TimeClock
ERMC8-G2Eight Zone Room Controller
ERMCT8-G2Eight Zone Room Controller with TimeClock