The ETC ColorSource Spot jr brings a four-color light engine at a fraction of the cost and a fraction of the size. Using a mix of red, green, blue,
and lime LED emitters, the ColorSource Spot jr offers an amazing range of color. This fixture is available in both Original and Deep Blue arrays,
and features the same color integrity technology as ETC’s other fixtures. Increasing the versatility of this fixture is its built-in zoom capabilities
and 5,708 lumen output.
APPLICATIONS
• Theatres and performance spaces
• Houses of worship
• Universities and schools
• Hospitality
• Retail
• Exhibition centers
• Meeting rooms
• Clubs
• Cafetoriums
PRODUCT FEATURES
• ETC’s RGB-L array (red, green, blue and lime)
- Also available in Deep Blue, which replaces the blue LEDs
with indigo for rich, saturated blues and magentas
• Simple user interface with seven-segment display
• powerCON
• DMX/RDM in and thru (5-pin XLR)
• LED droop compensation
• Optically calibrated
• Built-in zoom
®
in and thru
ORDERING INFORMATION
ColorSource Spot jr Light Engine
MODELDESCRIPTIONETL PART NUMBERCE PART NUMBER
CSSPOTJR2550ColorSource Spot jr XLR, black7416A10017416A1201
CSSPOTJR2550-1ColorSource Spot jr XLR, white7416A1001-17416A1201-1
CSSPOTJRDB2550ColorSource Spot jr Deep Blue XLR, black7416A10027416A1202
CSSPOTJRDB2550-1ColorSource Spot jr Deep Blue XLR, white7416A1002-17416A1202-1
Color options: -1 = white
Fixture ships with a 1.5 m powerCON power-input cable with a connector of choice. See page 9 for connector options.
1
ETC
PRODUCT SPECIFICATIONS
ColorSource Spot jr
ColorSource Series
Source
LED details52 Lumileds LUXEON® C LED
Max lumensStandard: 5,708
Deep Blue: 5,426
Max lumens per watt44.8
L70 rating (hours to 70%
output)*
>54,000 hours (both variants)
Color
Colors usedStandard: Red, green, blue, lime
Deep Blue: Red, green, indigo, lime
Color temperature rangeColor mixing
Calibrated arrayYes
Red shiftNo
Optical
Beam angle rangeBuilt in 25-50 degree zoom
Gate size50 mm
Aperture size6.25”-14”
Pattern projectionYes
Pattern sizeM (OD 66 mm, ID 48 mm), up to
2.03 mm (0.080 in) thick
Camera flicker
control/Hz range
1,200 Hz (default) and 25,000 Hz (via
RDM)
Control
Input methodDMX512 via 5-pin XLR
ProtocolsDMX512/RDM
Modes (footprint)4 modes, see page 10
RDM configurationYes
UI typeSeven-segment, three-button interface
Local controlYes
Onboard presetsYes (12)
Onboard sequencesYes (5)
Onboard effectsNo
Fixture-to-fixture controlYes
Notes15-bit virtual dimming engine
Electrical
Voltage range100–240 VAC 50/60 Hz
Input methodpowerCON power in and thru
Inrush35 A at 120 V (First half-cycle)
45 A at 240 V (First half-cycle)
Fixtures per circuit 7 fixtures (15 A power thru
connector) or 8 fixtures (R20 module
or similar)
Wattage typical/standby166 W / 2.6 W at 120 V
162 W / 2.0 W at 240 V
Current draw1.59 A at 120 V
0.87 A at 240 V
Thermal
Ambient operating temp0°–40° C (32°–104° F)
Fan (controllable)Yes (no)
Droop compensationYes
dB rangePending
BTUs/hour549
Physical
MaterialsABS plastic
Color optionsBlack or white
Mounting optionsYoke
IP ratingIP20
Weight5.4 kg (12 lb)
Included accessoriesHanging yoke, 1.5 m power cable
NotesSee page 9 for power cable options
Warranty
Fixture5 years
LED array 10 years
Regulatory and Compliance
Approved regulatory
standards
cETLus Listed
Conforms to UL 1598 Listed
Certified to CSA C22.2 No. 250 Listed
CE Compliant
*Note about LED luminaire lifetime:
For information on lifetime testing, visit: etcconnect.com/About/News/ETC-Fixture-Ratings-and-Warranties-Extended.aspx.
All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. In
individual situations, LEDs will be used for different durations and levels. This can eventually lead to minor alterations in color performance,
necessitating slight adjustments to presets, cues or programs.
2
ETC
-20%
+20%
1
2
3
45
16
6
7
8
9
10
15
11
1213
14
D
uv
84
CCT
100
0.0015
RgR
f
3246 K
8%
7%
1%
-8%
-14%
-5%
-5%
1%
5%
7%
7%
4%
-3%
0%
0%
8%
-40%
-30%
-20%
-10%
0%
10%
20%
30%
40%
Local Chroma S hift (R
cs,hj
)
0. 03
-0.07
-0.11
-0.10
-0.02
0. 07
0. 16
0. 06
0. 09
0. 07
0. 01
-0.07
-0.07
0. 06
0. 09
0. 01
-0 .5
-0 .4
-0 .3
-0 .2
-0 .1
0.0
0.1
0.2
0.3
0.4
0.5
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Local Hue Shif t (R
hs,hj
)
Hue- Angle Bi n (j)
Colors are for visual orientation purposes only. Created with the IES TM-30-18 Calculator Versio n 2 .0.
IES TM-30-18 C olor Rendit ion Repor t
-20%
+20%
1
2
3
45
16
6
7
8
9
10
15
11
1213
14
D
uv
81
CCT
111
0.0045
RgR
f
5646 K
5%
0%
1%
4%
11%
16%
12%
3%
-6%
-9%
-4%
1%
9%
13%
19%
10%
-40%
-30%
-20%
-10%
0%
10%
20%
30%
40%
Local Chroma S hift (R
cs,hj
)
-0.05
-0.03
0. 07
0. 13
0. 11
0. 05
-0.06
-0.11
-0.08
0. 03
0. 18
0. 19
0. 17
0. 09
0. 04
-0.07
-0 .5
-0 .4
-0 .3
-0 .2
-0 .1
0.0
0.1
0.2
0.3
0.4
0.5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Local Hue Shif t (R
hs,hj
)
Hue- Angle Bi n (j)
Colors are for visual orientation purposes only. Created with the ANSI/IES TM-30-18 Calcu lator Version 2.00.
ANSI/IES TM
-30-18 Color Re ndition Report
PRODUCT FEATURES
ColorSource Spot jr
ColorSource Series
LED DROOP COMPENSATION
ETC’s custom software adjusts for the
changes that naturally occur as LEDs heat
up and cool down so you never have to
RGB-L ARRAY
The custom four-color blend of LEDs
incorporates a hint of lime to increase
spectral reach and color depth.
worry about color shift.
COLOR METRIC INFORMATION
COLORSOURCE SPOT JR 3200 K TM-30-18
SIMPLE USER INTERFACE
The simple seven-segment display and
navigation buttons enable quick setup
and recall of built-in presets.
COLORSOURCE SPOT JR 5600 K TM-30-18
3
ETC
-20%
+20%
1
2
3
45
16
6
7
8
9
10
15
11
1213
14
D
uv
84
CCT
113
0.0051
RgR
f
3320 K
8%
5%
3%
4%
10%
14%
15%
9%
3%
-5%
-4%
1%
6%
9%
11%
13%
-40%
-30%
-20%
-10%
0%
10%
20%
30%
40%
Local Chroma S hift (R
cs,hj
)
-0.05
-0.06
-0.01
0. 06
0. 08
0. 06
-0.05
-0.10
-0.12
-0.09
0. 04
0. 06
0. 06
0. 11
0. 04
-0.05
-0 .5
-0 .4
-0 .3
-0 .2
-0 .1
0.0
0.1
0.2
0.3
0.4
0.5
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Local Hue Shif t (
R
hs,hj
)
Hue- Angle Bi n (j)
Colors are for visual orientation purposes only. Created with the ANSI/IES TM-30-18 Calcu lator Version 2.00.
ANSI/IES TM-30-1 8 Col or Rendition R eport
-20%
+20%
1
2
3
45
16
6
7
8
9
10
15
11
1213
14
D
uv
81
CCT
111
0.0045
RgR
f
5646 K
5%
0%
1%
4%
11%
16%
12%
3%
-6%
-9%
-4%
1%
9%
13%
19%
10%
-40%
-30%
-20%
-10%
0%
10%
20%
30%
40%
Local Chroma S hift (R
cs,hj
)
-0.05
-0.03
0. 07
0. 13
0. 11
0. 05
-0.06
-0.11
-0.08
0. 03
0. 18
0. 19
0. 17
0. 09
0. 04
-0.07
-0 .5
-0 .4
-0 .3
-0 .2
-0 .1
0.0
0.1
0.2
0.3
0.4
0.5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Local Hue Shif t (
R
hs,hj
)
Hue- Angle Bi n (j)
Colors are for visual orientation purposes only. Created with the ANSI/IES TM-30-18 Calcu lator Version 2.00.
ANSI/IES TM-30-1 8 Col or Rendition R eport
COLOR METRIC INFORMATION
COLORSOURCE SPOT JR DEEP BLUE 3200 K TM-30-18
ColorSource Spot jr
ColorSource Series
COLORSOURCE SPOT JR DEEP BLUE 5600 K TM-30-18
Additional Color Metrics
STANDARD 3200 KSTANDARD 5600 KDEEP BLUE 3200 KDEEP BLUE 5600 K
CRI Ra (R9)82 647980
TLCI84486773
4
ETC
COLOR METRIC INFORMATION
ColorSource Spot jr
ColorSource Series
5
ETC
0
0.2
0.4
0.6
0.8
1
-20-15-1 0-50510
1520
Candela
Degrees
X
Y
0
0.2
0.4
0.6
0.8
1
-25 -20 -15 -10 -505 10 15 20 25
Candela
Degrees
X
Y
Field Angle
Field Angle
PHOTOMETRY INFORMATION
ColorSource Spot jr
ColorSource Series
ColorSource Spot jr Narrow
ModeDegree CandelaField
Lumens
Full On Direct2734,8945,7085,640161.335.4
3200 K2726,5804,3594,30098.444.3
5600 K2726,4144,3804,297138.031.7
Metric conversions: For meters, multiply feet by 0.3048.
For lux, multiply footcandles by 10.76.
27.2˚27.7˚
Throw Distance (d)10 ft
3.0 m
Field Diameter4.9 ft
1.5 m
15 ft
4.6 m
7.4 ft
2.3 m
Illuminance (fc)34915587391
Illuminance (lux)3,7561,66993941710.76
To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared.
For field diameter at any distance, multiply distance by 0.493.
For beam diameter at any distance, multiply by 0.484.
Beam
Lumens
20 ft
6.1 m
9.9 ft
3.0 m
Power
Consumption
30 ft
9.1 m
14.8 ft
4.5 m
Lumens
Per Watt
186.8 ft
56.9 m
–
Beam Angle
Candela Plot
Iso-Illuminance Diagram
(Flat Surface Distribution)
10%
50%
% illuminance
foot candle
or lux
ColorSource Spot jr Mid
ModeDegree CandelaField
Lumens
Full On Direct3718,6305,4675,391161.333.9
3200 K3714,8074,1924,14698.442.6
5600 K3715,7454,1143,930138.029.8
Metric conversions: For meters, multiply feet by 0.3048.
For lux, multiply footcandles by 10.76.
37.3˚37.8˚
Throw Distance (d)10 ft
3.0 m
Field Diameter6.8 ft
Illuminance (fc)1868347211
Illuminance (lux)2,00589150122310.76
To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared.
For field diameter at any distance, multiply distance by 0.685.
For beam diameter at any distance, multiply by 0.675.
2.1 m
15 ft
4.6 m
10.3 ft
3.1 m
13.7 ft
Beam
Lumens
20 ft
6.1 m
4.2 m
Power
Consumption
30 ft
9.1 m
20.5 ft
6.3 m
136.5 ft
41.6 m
–
Lumens
Per Watt
Beam Angle
6
Candela Plot
Iso-Illuminance Diagram
(Flat Surface Distribution)
10%
50%
% illuminance
foot candle
or lux
ETC
0
0.2
0.4
0.6
0.8
1
-30 -25 -2 0 -15 -10 -5 0 5 10 15 20 25 30
Candela
Degrees
X
Y
0
0.2
0.4
0.6
0.8
1
-20-15-1 0-505101520
Candela
Degrees
X
Y
Field Angle
Field Angle
PHOTOMETRY INFORMATION
ColorSource Spot jr
ColorSource Series
ColorSource Spot jr Wide
ModeDegree CandelaField
Lumens
Full On Direct4513,4045,2864,004161.332.8
3200 K4513,1864,0321,99498.441.0
5600 K4513,7724,2622,132138.030.9
Metric conversions: For meters, multiply feet by 0.3048.
For lux, multiply footcandles by 10.76.
45.3˚48.8˚
Throw Distance (d)10 ft
3.0 m
Field Diameter9.1 ft
2.8 m
15 ft
4.6 m
13.6 ft
4.1 m
Illuminance (fc)1346034151
Illuminance (lux)1,44364136116010.76
To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared.
For field diameter at any distance, multiply distance by 0.907.
For beam diameter at any distance, multiply by 0.835.
Beam
Lumens
20 ft
6.1 m
18.1 ft
5.5 m
Power
Consumption
30 ft
9.1 m
27.2 ft
8.3 m
Lumens
Per Watt
115.8 ft
35.3 m
–
Beam Angle
Candela Plot
Iso-Illuminance Diagram
(Flat Surface Distribution)
10%
50%
% illuminance
foot candle
or lux
ColorSource Spot jr Deep Blue Narrow
ModeDegree CandelaField
Lumens
Full On Direct2733,8215,4265,350161.633.6
3200 K2733,4424,6514,570103.844.8
5600 K2739,5555,1405,012133.038.6
Metric conversions: For meters, multiply feet by 0.3048.
For lux, multiply footcandles by 10.76.
26.8˚27.2˚
Throw Distance (d)10 ft
3.0 m
Field Diameter4.8 ft
Illuminance (fc)33815085381
Illuminance (lux)3,6401,61891040410.76
To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared.
For field diameter at any distance, multiply distance by 0.484.
For beam diameter at any distance, multiply by 0.476.
1.5 m
15 ft
4.6 m
7.3 ft
2.2 m
Beam
Lumens
20 ft
6.1 m
9.7 ft
2.9 m
Power
Consumption
30 ft
9.1 m
14.5 ft
4.4 m
183.9 ft
56.1 m
–
Lumens
Per Watt
Beam Angle
7
Candela Plot
Iso-Illuminance Diagram
(Flat Surface Distribution)
10%
50%
% illuminance
foot candle
or lux
ETC
0
0.2
0.4
0.6
0.8
1
-25 -20 -15 -10 -5 05 10 15 20 25
Candela
Degrees
X
Y
0
0.2
0.4
0.6
0.8
1
-30 -25 -20 -1 5 -10 -5 0 5 10 15 20 25 30
Candela
Degrees
X
Y
Field Angle
Field Angle
PHOTOMETRY INFORMATION
ColorSource Spot jr
ColorSource Series
ColorSource Spot jr Deep Blue Mid
ModeDegree CandelaField
Lumens
Full On Direct3919,3715,2935,238161.632.8
3200 K3915,1694,5254,409103.843.6
5600 K3916,8335,0174,884133.037.7
Metric conversions: For meters, multiply feet by 0.3048.
For lux, multiply footcandles by 10.76.
39.0˚39.4˚
Throw Distance (d)10 ft
3.0 m
Field Diameter7.2 ft
2.2 m
15 ft
4.6 m
10.7 ft
3.3 m
Illuminance (fc)1948648221
Illuminance (lux)2,08592752123210.76
To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared.
For field diameter at any distance, multiply distance by 0.716.
For beam diameter at any distance, multiply by 0.708.
Beam
Lumens
20 ft
6.1 m
14.3 ft
4.4 m
Power
Consumption
30 ft
9.1 m
21.5 ft
6.5 m
Lumens
Per Watt
139.2 ft
42.4 m
–
Beam Angle
Candela Plot
Iso-Illuminance Diagram
(Flat Surface Distribution)
10%
50%
% illuminance
foot candle
or lux
ColorSource Spot jr Deep Blue Wide
ModeDegree CandelaField
Lumens
Full On Direct4512,9075,0353,699161.631.2
3200 K4511,0084,2753,144103.841.2
5600 K4512,1674,7253,473133.035.5
Metric conversions: For meters, multiply feet by 0.3048.
For lux, multiply footcandles by 10.76.
45.3˚49.1˚
Throw Distance (d)10 ft
3.0 m
Field Diameter9.1 ft
Illuminance (fc)1295732141
Illuminance (lux)1,38961734715410.76
To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared.
For field diameter at any distance, multiply distance by 0.914.
For beam diameter at any distance, multiply by 0.835.
2.8 m
15 ft
4.6 m
13.7 ft
4.2 m
6.1 m
18.3 ft
5.6 m
Beam
Lumens
20 ft
Power
Consumption
30 ft
9.1 m
27.4 ft
8.4 m
113.6 ft
34.6 m
–
Lumens
Per Watt
Beam Angle
8
Candela Plot
Iso-Illuminance Diagram
(Flat Surface Distribution)
10%
50%
% illuminance
foot candle
or lux
ETC
ColorSource Spot jr
ColorSource Series
ADDITIONAL ORDERING INFORMATION
Fixture Accessories
MODELDESCRIPTIONPART NUMBER
400CCC-clamp 7060A2009 (not CE)
400SCSafety cable7060A1022
DPSJ-X25 ft powerCON-to-Edison input power cable with inline switch7400B7030 (not CE)
CSSPOTJRAHColorSource Spot jr accessory holderPSF1181
CSSPOTJRAH-1ColorSource Spot jr accessory holder, whitePSF1181-1
CSSPOTJRTHColorSource Spot jr top hatPSF1182
CSSPOTJRTH-1ColorSource Spot jr top hat, whitePSF1182-1
CSSPOTJRHHColorSource Spot jr half top hatPSF1183
CSSPOTJRHH-1ColorSource Spot jr half top hat, whitePSF1183-1
CSSPOTJRMHColorSource Spot jr media holderPSF1184
CSSPOTJRMH-1 ColorSource Spot jr media holder, whitePSF1184-1
CSSPOTJRDNColorSource Spot jr donutPSF1185
CSSPOTJRDN-1ColorSource Spot jr donut, whitePSF1185-1
CSSPOTJRPHColorSource Spot jr gobo holder7416A1301
CSSPOTJRAKColorSource Spot jr Accessory Kit
(gobo holder, smooth wash diffuser (in gate), accessory holder, media frame)
CSSPOTJRAK-1ColorSource Spot jr Accessory Kit
(gobo holder, smooth wash diffuser (in gate), accessory holder, media frame), white
Power Input Cables
Use information below to order 5 ft power input leads with factory-fitted connectors. CE fixtures ship with powerCON to bare end cables in the box.
MODELDESCRIPTIONPART NUMBER
DPA-A5 ft powerCON to parallel blade U-ground (Edison) connector7410B7037-A (not CE)
DPA-B5 ft powerCON to 20 A two-pin and ground (stage pin) connector7410B7037-B (not CE)
DPA-C5 ft powerCON to grounded 20 A twistlock connector7410B7037-C (not CE)
DPA-X5 ft powerCON to bare-end power input lead7410B7037-X (not CE)
Power Thru Jumpers
Note: Power thru jumpers connect to a fixture’s output (thru) connector to provide a link to successive fixtures.
MODELDESCRIPTIONPART NUMBER
DPJ-55 ft powerCON-to-powerCON
DPJ-1010 ft powerCON-to-powerCON
fixture-to-fixture jumper7410B7020 (not CE)
fixture-to-fixture jumper7410B7010 (not CE)
Diffusers
The Soft Focus Diffuser fits into a standard M-size pattern holder and delivers beautiful, homogenized light. You can also use the Soft Focus Diffuser with patterns for dappled
and soft-edge projections.
MODELDESCRIPTIONPART NUMBER
CSSPOTJRDColorSource Spot jr in gate smooth wash diffuser7416A4025
7416K1001
7416K1001-1
9
ETC
CONTROL
DMX Input Channel Profiles
DMX
Profile
5ch
(Default)
RGB31-Red
1ch11-IntensityThis mode controls the intensity of Preset 1.
Dir61-Intensity
DMX
Channels
51-Intensity
Channel
Assignments
2-Red
3-Green
4-Blue
5-Strobe
2-Green
3-Blue
2-Red
3-Green
4-Blue/Indigo*
5-Lime
6-Strobe
Notes
Lime is mixed automatically.
Lime is mixed automatically.
*Original ColorSource Spot Jr fixture uses blue
in channel 4; Deep Blue ColorSource
Spot jr fixture uses indigo in channel 4.
ColorSource Spot jr
ColorSource Series
PHYSICAL
ColorSource Spot Jr Weights
WEIGHT*SHIPPING WEIGHT
lbkglbkg
With Barrel12.05.414.06.4
*Does not include mounting hardware.
ColorSource Spot Jr Dimensions
HEIGHTWIDTHDEPTH
inmminmminmm
ColorSource Spot jr13.0333110.1725818.12460
Corporate Headquarters l Middleton, WI USA
Global Offices