Escort 9500CI User Manual
PASSPORT 9500ci International Quick Reference
Power But ton
Programmi ng Buttons
Software Updates
PASSPORT’s red light and speed camera
database is easily updated using our exclusive
detector software tools found on our web site.
Firmware, or the operating software for the
detector, can also be updated using these
tools.
In order to have access to these updates,
you must register your PASSPORT at www.
EscortRadar.com. Once registered, you will
receive email notifications that updates are
now available for your database or firmware.
The PASSPORT 9500ci International will
need to be powered up to use the software
tools. If you have an Internet connected
laptop computer, you can take it to the vehicle
to download the updates.
There are 12 user-selectable options you can
customize on your 9500ci. The buttons
labeled VOL and BRT on the controller are
used to enter Preferences. Once you enter
Preferences, the VOL button is used to REVIEW
your current choices, and BRT button is used
to CHANGE settings.
How to use Preferences
1 To enter Preferences, press and hold
both the VOL and BRT buttons down for 2
seconds. The unit will display the word
Prefs, accompanied by a voice
announcement.
2 Press the VOL button to review the
current settings. You can either tap the
button to change from item to item, or hold
the button to scroll through the items.
3 Press the BRT button to change any
setting. You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options.
4 To exit Preferences, simply wait 8
seconds without pressing any button, or
press the PWR button
display
Complete, accompanied by a voice
announcement.
). The unit will
(
U L T I M A T E R A D A R
•
L A S E R D E F E N S E S Y S T E M
PASSPORT 9500ci International Quick Reference
Press the VOL button to go from
one category to the next
(Power-on indication)
For descriptions and
details of features and
functions visit
EscortRadar.com to
view and download the
complete PASSPORT
9500ci International
Owner’s Manual.
When KSW is off,
each K segment can be turned on or off
K1 (23.950 - 24.110) ON or OFF (default is on)
K2 (24.110 - 24.175) ON or OFF (default is on)
K3 (24.175 - 24.250) ON or OFF (default is on)
When KaSW is off,
each Ka segment can be turned on or off
Ka1 (33.388 - 33.708) ON or OFF (default is off)
Ka2 (33.713 - 33.888) ON or OFF (default is off)
Ka3 (33.888 - 34.208) ON or OFF (default is off)
Ka4 (34.206 - 34.589) ON or OFF (default is on)
Ka5 (34.588 - 34.804) ON or OFF (default is off)
Ka6 (34.808 - 35.166) ON or OFF (default is off)
Ka7 (35.166 - 35.388) ON or OFF (default is off)
Ka8 (35.388 - 35.625) ON or OFF (default is on)
Ka9 (35.628 - 35.848) ON or OFF (default is off)
Ka10 (35.848 - 36.008) ON or OFF (default is off)
PILOT
CRUISE ALERT
GPS
AUTOLEARN
SPEED ALERT
METER
AUTOMUTE
UNITS
VOICE
LANGUAGE
BANDS
MARKERS
Press the BRT/CHG button to change
your setti ng within a categor y
Pilot HWY
Pilot H
Pilot H.>
Pilot V
Pilot SPD
OFF 20-100
GPS ON
GPS OFF
aLrn OFF
aLrn ON
sAlrt ON
sAlrt OFF
Meter STD
Meter EXP
Meter SPC
aMute ON
aMute OFF
Units MET
Units ENG
Voice ON
Voice OFF
Lang ENG
Lang SPA
Bands DFT
Bands MOD
X ON or OFF (default is OFF)
KSW ON or OFF (default is ON)
KMTR ON or OFF (default is OFF)
KaSW ON or OFF (default is OFF)
POP ON or OFF (default is OFF)
SWS ON or OFF (default is OFF)
LSR RECV or SHFT or OFF (default is RECV)
RDR ON or OFF (default is OFF)
Mark DFT
Mark MOD
rCam ON
sCam ON or OFF (default is ON)
aCam ON or OFF (default is ON)
Trap ON or OFF (default is ON)
Othr ON or OFF (default is ON)
* Full word: Highway, AutoScn, etc.
Letter: H, A, C, Cnx
Letter, with scanning dot
Vehicle voltage
Vehicle speed
* 20 KPH. Offers double beep alert tones
below specified spee d 20, 25, 30. . . 100 KPH
* GPS On
GPS Off
* AutoLearn Off
AutoLearn On
* Speed Alert On
Speed Alert Off
* Bar-gr aph Meter
Exper t Display
Spec Display
* AutoMute On
AutoMute Off
* Units Metric
Units English
* Voice Alerts On
Voice Alerts Off
* Langu age English
Language Spanish
* Factor y Default Settings
Factory Default Settings Modified
Turn bands ON or OFF by
pressing the MUTE button
* Factor y Default Settings
One or more bands have been changed
or OFF (default is ON)
* Factory Default Settings
Tuned Exclusively For The European Union
Loading...