Esatto ETL95 User Manual
Model Code/s:
Model Code/s: Product:
ETL95ETL95
9.5kg Top Load
Washing Machine
Document:
User Manual
Notes
Contents
Safe ty and pr ecautions...... ..... ..... ..... ............ ..... ..... ..... ............ ..... ..... ..
Installation of the washer.......... ..... ..... ................. ..... ..... ................. ..... .
Preparation before washing............ ..... ..... ................. ..... ..... .................
Parts identification of the washer......... ..... ..... ................. ..... ..... ..... ........
Instructi on of the washer operation panel............. ..... ..... ................. ..... ..
Quick start ..... ..... ..... ................. ..... ..... ................. ..... ..... ................. ....
The main wash....... ..... ..... ..... ............ ..... ..... ..... ............ ..... ..... ..... ........
Special features..... ..... ..... ..... ............ ..... ..... ..... ................. ..... ..... ........
Cleaning and Maintenance of the washi ng mach ine.. ................. ..... ..... .................
Identify usual trouble of washer..............................................................................
2
5
7
8
9
11
12
13
15
16
Safety and precautions
Observe the following items in order to prevent from injuring yourself, others
and the damage of property:
Warning
Caution
Please observe following contents of graphics.
This graphics represents(cause attention),and detailed
This indicates serious injury or death to human
being may be caused.
This will remind you that injury to people and
damage to property may occur.
cautions will be displayed inside the graphics.
This graphics represents (operation prohibited), and detailed
prohibitive items will be displayed inside the graphics.
This graphic represents (forcible execution), and detailed
forcible execution items will be displayed inside the graphics.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or
lack
of experience and
given supervision
or instruction concerning
by a person responsible for their safety.
knowledge, unless they have been
use of the appliance
Children
should be
supervised to ensure that they do not play with the appliance.
Warning
Malfunction display and solutions ............ ..... ..... ..... ............ ..... ..... ..... ....
Technical specifications......... ..... ..... ..... ................. ..... ..... ................. ..... ..... ..
1
17
18
Please do not disassembly
and assembly the
machine without
authorization.
No dismantling
Please do not install the machine in
damp and raining environment to avoid
electric shocking, catching fire, faults
and distortion
accidents.
小天鹅
No dampness
Please do not insert your hand
and take out clothes inside the
spin barrel before
it is fully stopped.
No touching
Please do not directly rinse the
machine with water when
cleaning.
小天鹅
No rinsing
2
Please do not let children climb the
machine or peer into the rotating
spin barrel to avoid accidents.
Warning
It is prohibited to wash the clothes
touching with kerosene, gasoline,
alcohol and other flammable materials.
Please use correct power source.
Please do not pull out or insert the
plug with wet hands to avoid electric
shocking.
Prohibited
Please do not damage power flexible
cord and power plug to avoid electric
shocking, short circuit and catching
fire.
Prohibited
Please pull out plug from the socket
if the machine is not in use.
Pull out the plug
Prohibited
Regularly clean the power plug to
remove dust and dirt to avoid contact
failure.
!
Please well connect the earth line of
socket to avoid electric shocking by
accidental leakage.
（earthing）
Earthing
!
Please ensure that the water inlet pipe
is connected and the tap is opened
before washing
clothes.
+
+
!
Customers are not allowed to change
the power line without permission.
Prohibited
Wet hands are
prohibited
Caution
The water temperature shall not exceed
50℃ when washing
with warm water.
Prohibited
It is strictly prohibited to place
children or lay
weights on the
washer.
Prohibited
>50 C
小天鹅
小天鹅
Please insert the power plug tightly.
!
Please do not place on the washer
burning candle, mosquito-repellent
incense, cigarette and other
flammable things, as well
as electric stove, air
heating fan and other
heating
sources.
Smoke and fire prohibited
3
Please do not pull the electric cord
when pulling out the
plug.
小天鹅
!
Please do not wash down jacket,
raincoat, fishing coat and similar
clothes in the
washer.
Prohibited
4
Installation of the washer
Installation of the washer
Remove package
Remove package and take out the bottom board of
the cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion is
strictly forbidden.
Installation of drain hose
Completely sleeve the drain
hose over the sewer.
Fix and tighten it with a hoop.
( As shown in the figure )
Placement of water drain hose
Under3m
Under 15cm
If the water drain hose shall
be extended, its length shall
not exceed 3 meters,
otherwise it will affect the
water discharging time.
The placed height of water
drain hose shall not exceed
15cm.
FOR LOWER DRAIN SYSTEM ONLY
Placement of upper water drain hose
The he ig ht o f dr ain hose (“a”)s ho ul d between 86-10 0 cm .
Diam et er o f “b ”shuld not less t ha n 3 cm , and flow capaci ty
not le ss t ha n 40 L /Min.
Befo re w as hi ng machine star ts , us er should hang up t he
drai n pi pe 8 6-100cm heigh t fr om t he f loor.
FOR UP PE R DR AI N SYSTEM ONLY
Base foamed cushion
Do not bend the water
drain hose and place
it under the washer.
86~100 cm
Installation of water inlet pipe
+
+
+
+
1
2
Small ball
Push down the slide jacket
to expose the small balls and
enable separation of connector
socket from speedy connector.
4
A
B
Tightly screw another end of water inlet
hose on water inlet valve . (with rubber
seal ring inside).
Note: When tightening the clamping nut,
evenly apply the force and do not twist
the water inlet valve to avoid breaking of
water inlet valve joint.
+
+
5mm
Junk ring
The connection socket
consists of A and B two
parts. Before installation,
A and B two parts must
be unscrewed about
5mm, or directly
disconnected. If the
bore of water tap is
larger, remove the
plastic junk ring of
Connect
part A.
Connect: Push down the slide jacket
of speedy connector (4 small balls
must be exposed ),insert it into the
connection socket and then push
upward Release the connection
+
+
of water tap with speedy connector
completely. If it is required to feed
6
water, simply open the water tap.
Separate: Close the water tap, push
down the slide jacket of speedy
connector and pull out the speedy connector.
+
+
3
Unscrew four screws of part A
and sleeve part A horizontally
over the mouth at the end of
5
water tap (the mouth at the end
+
of water tap must be flat and
+
smooth. Flatten it by filing if it is
not flat) and push it upward with force making the rubber
washer firmly press the plane center of water tap mouth.
Then tighten the screw sequentially. After that, tightly
screw on part B.
+
+
7
Separate
Clamping nut
Water inlet hose
+
Installation of water inlet pipe
Put the water inlet pipe(which has
metallic filtering bag) screw on to the tap.
Tightly screw another end of water
inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the
clamping nut, evenly apply the
force and do not twist the water
inlet valve to avoid breaking of
water inlet valve joint.
Clamping nut
Water inlet hose
If the supply cord is damaged, it must be replaced by the
Only for model with single screw thread water inlet pipe
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard. The instructions for appliances
connected to the water mains by detachable hose-sets shall
state that the new hose-sets supplied with the appliance are
to be used and that old hose-sets should not be reused.The
Only for model with double
screw thread water inlet pipe
55
openings must not be obstructed by a carpet.This appliance
is for indoor use only.
666
6
Loading...