eQ 3 KS300US Users Manual
Operating Instructions
Combination Weather Sensor
KS 200US
ELV Electronics Ltd. · Hongkong
2
These operating instructions belong with this product. They contain important information
for putting it into service and operating it. This should be noted also when this product is
passed on to a third party.
Therefore look after these operating instructions for future reference!
A list of contents with the corresponding page numbers can be found in the index on page 4.
1st English edition May 2006
Documentation © 2006 ELV Electronics Limited
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or
duplicated or processed using electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is
regularly checked and corrections made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
Printed in Hong Kong
Modifications due to technical improvements may be made without prior notification.
00066944 Y2006 V1.0
3
Introduction
Dear Customer,
Thank you for purchasing this product.
The product has been EMC-tested and thus meets the requirements of the valid national
guidelines. See also FCC-Information.
In order to maintain this condition and ensure safe operation, you, as the user, have to observe
this operating manual.
Prior to using the product for the first time, please read the entire operating manual and observe
all operating and safety instructions.
We should already like to point out now the correct order for commissioning the
products. Please also observe the installation and calibration instructions in this
operating manual as well as the information about impairment of radio transmission
between the sensors and base station.
All company names and product descriptions listed herein are the trademarks of the
respective manufacturers. All rights are reserved.
F
4
Table of Contents
Page
1. Intended Use ....................................................................................................................
5
2. Scope of Delivery .............................................................................................................
6
3. Explanation of Symbols
................................................................................................... 6
4. Features and Functions
................................................................................................... 7
5. Safety Instructions ...........................................................................................................
7
6. Battery and Accumulator Information ...........................................................................
8
7. Preparation and Start-up ................................................................................................
9
Start-up of the Multipurpose Sensor .................................................................................
9
8. Replacing the Battery ....................................................................................................
12
Multipurpose Sensor ....................................................................................................... 12
9. Troubleshooting .............................................................................................................
13
10. Coverage ........................................................................................................................
14
11. Maintenance and Cleaning ...........................................................................................
15
a) General .......................................................................................................................
15
b) Cleaning the Multipurpose Sensor ............................................................................
15
12. Handling ..........................................................................................................................
16
a) General .......................................................................................................................
16
b) Multipurpose Sensor ..................................................................................................
16
13. Disposal ..........................................................................................................................
17
a) General .......................................................................................................................
17
b) Disposal Instructions for Batteries/Accumulators .....................................................
17
14. Technical Data ................................................................................................................
18
15. FCC-Information ............................................................................................................
19
5
1. Intended Use
The combination weather sensor is a high-quality universal weather measuring system which is
able to process a large number of weather data and additional information.
All relevant data are transmitted to an optional base unit.
The forecasts of the basis station are to be considered orientation values. They do not represent
an absolutely accurate prognosis. The manufacturer does not take over any responsibility for
incorrect indications, measured values or weather forecasts and the consequences thereof.
This product is designed for private use and is not suitable for medical purposes or for informing
the public.
The components of this product are not a toy, they contain fragile glass and ceramic parts.
Set up all the components in such a manner that they are out of the reach of children.
The product is operated by batteries. All external sensors transmit their data to the base station
via radio in the range of 433 MHz (coverage up to 100m in the free field).
Use other than that described above will lead to damage to the product.
Please read the complete operating instructions before use. They contain important
information for correct installation, functioning and operation.
6
2. Scope of Delivery
• Multipurpose sensor / combination sensor KS 200US
• Mounting rod for the multipurpose sensor
• Specially shaped aluminium part for installing the mounting rod
• Hose band clip
• Operating instructions
3. Explanation of Symbols
The symbol with the lightening in the triangle is used when your health is at risk, e.g.
through an electric shock
An exclamation mark in a triangle indicates important information in these operating
instructions which must be observed without fail.
The ”hand” symbol can be found when you are to be given tips and information on
operation.
F
Loading...