Epson Stylus RX580 Product Information Guide

Page 1
Epson Stylus Photo RX580

Product Parts

Sheet feeder
Paper support
Edge guide
LCD screen
Tray lever
AC inlet
Feeder guard
Document cover
Control panel
USB port
Front tray extensions
Document table
Memory card slots
EXT. I/F USB port (for PictBridge USB storage devices)
Scanner unit Cartridge cover
®
Infrared port
or
Copy a photo or document
View and print photos on memory card; scan to card; print an index sheet; print from an index sheet; play a slide show of photos on card
Display 1 or 9 photos; crop or zoom a photo
Check ink status; replace ink cartridges; maintain the RX580; adjust CD/DVD print position; backup photos; restore default settings; make PictBridge or Bluetooth
Print on CD/DVDs; reprint or restore photos; print photo greeting cards
CD/DVD tray
®
settings
Stop printing or copying; cancel settings
11/06 Epson Stylus Photo RX580 - 1
Page 2
Epson Stylus Photo RX580

Accessories

Ink Cartridges

Cartridge Part number
Black 78 (T078120)
Cyan 78 (T078220)
Magenta 78 (T078320)
Yellow 78 (T078420)
Light Cyan 78 (T078520)
Light Magenta 78 (T078620)
High-Capacity Black 77 (T077120)
High-Capacity Cyan 77 (T077220)
High-Capacity Magenta 77 (T077320)
High-Capacity Yellow 77 (T077420)
High-Capacity Light Cyan 77 (T077520)
High-Capacity Light Magenta 77 (T077620)
Caution: To ensure good results, use genuine Epson cartridges and do not refill them. Other products may cause damage to your RX580 not covered by Epson’s warranties.
Don’t use an ink cartridge beyond the expiration date on the package.
Note: Try the High-Capacity 77 cartridges available at http://www.epson.com/highcapacity (U.S. sales) or http://www.epson.ca (Canadian sales).

Epson Media

Paper name* Size Part number
Epson Ultra Premium Photo Paper Glossy
Epson Ultra Premium Glossy Photo Paper
Epson Premium Photo Paper Glossy
Epson Premium Glossy Photo Paper
Epson Premium Photo Paper Semi-gloss
Epson Premium Semigloss Photo Paper
Epson Photo Paper Glossy
Epson Glossy Photo Paper
Epson Ultra Premium Photo Paper Luster
Epson Premium Luster Photo Paper
Epson Bright White Paper
Epson Premium Bright White Paper
Epson Premium Presentation Paper Matte
Epson Matte Paper Heavyweight
Epson Premium Presentation Paper Matte Double-sided
Borderless 4 × 6 inches S041934
Letter (8.5 × 11 inches) S041935
Borderless 4 × 6 inches S041808
S041727
Borderless 5 × 7 inches S041464
Borderless 8 × 10 inches S041465
Letter (8.5 × 11 inches) S041286
S041667
Borderless 4 × 6 inches S041982
Letter (8.5 × 11 inches) S041331
Borderless 4 × 6 inches S041809
Letter (8.5 × 11 inches) S041141
S041649 S041271
Letter (8.5 x 11 inches) S041405
Letter (8.5 × 11 inches) S041586
Borderless 8 × 10 inches S041467
Letter (8.5 × 11 inches) S041257
Legal (8.5 × 14 inches) S041067
Letter (8.5 × 11 inches) S041568
2 - Epson Stylus Photo RX580 11/06
Epson Double-sided Matte Paper
Epson Presentation Paper Matte
Epson Photo Quality Ink Jet Paper
Epson Iron-on Cool Peel Transfer paper
Epson Photo Quality Self Adhesive Sheets
Letter (8.5 × 11 inches) S041062
Letter (8.5 × 11 inches) S041153
A4 (8.3 × 11.7 inches) S041106
* Availability of paper types varies by location
Page 3
Epson Stylus Photo RX580

Product Specifications

Printing

Printing method On-demand ink jet
Ink Configuration Six individual ink cartridges in black,
cyan, magenta, yellow, light cyan, and light magenta

Mechanical

Paper feed Friction
Paper path Sheet feeder, top entry
CD/DVD tray, front entry
Sheet feeder capacity About 120 sheets
Dimensions
Storage Width: 17.7 inches (450 mm)
Depth: 16.3 inches (414 mm) Height: 8.3 inches (210 mm)
Printing Width: 17.7 inches (450 mm)
Depth: 21.0 inches (534 mm) Height: 11.1 inches (281 mm)

Scanning

Scanner type Flatbed color
Photoelectric device CIS
Effective pixels 10,200 × 14,040 pixels at 1200 dpi
Document size US letter size or A4 (8.5 × 11.7 inches)
Scanning resolution 1200 dpi (main scan)
2400 dpi (sub scan)
Output resolution 50 to 4800, 7200, and 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
Scanning speed 1200 dpi B/W:
Approximately 10 msec per line
1200 dpi Color: Approximately 28 msec per line
Image data 16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
Light source RGB three color LED

Electrical

Weight 18.3 lb (8.3 kg) without ink cartridges

Ink Cartridges

Colors Black, cyan, magenta, yellow, light cyan
light magenta
Cartridge life Within 6 months after opening package,
at 77 °F (25 °C)
Dimensions (W × D × H) 0.5 × 2.7 × 1.9 inches
(12.7 × 68.0 × 47.0 mm)
Storage temperature –4 to 104 °F (–20 to 40 °C) (installed)
-22 to 104 °F (–30 to 40 °C) (packing storage) 1 month at 104 °F (40 °C)
Freezing temperature* 3.2 °F (–16 °C)
* Ink thaws and is usable after approximately 3 hours at
77 °F (25 °C)
Caution: To ensure the best results, use genuine Epson cartridges and do not refill them. Other products may cause damage to your RX580 not covered by Epson’s warranties. Don’t use an ink cartridge beyond the expiration date on the package.
Rated Voltage 100-120 V Model 220-240 V Model
Input voltage range* AC 90 to 132 V AC 198 to 264 V
Rated frequency range 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Rated current 0.6 A
Power consumption
* Check the label on the back of the RX580 for its voltage.
ISO/IEC10561 Letter Pattern
Low power mode
Sleep mode Approx. 2.5 W Approx. 2.7 W
Power off mode
(max. 1.2 A)
Approx. 16 W
Approx 5.5 W
Approx. 0.2 W Approx. 0.3 W
0.3 A (max. 0.6 A)

Environmental

Temperature
Operation 50 to 95 °F (10 to 35 °C)
Storage –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
11/06 Epson Stylus Photo RX580 - 3
Page 4
Epson Stylus Photo RX580
Humidity (without condensation)
Operation 20 to 80% RH
Storage 5 to 85% RH

Interfaces

USB 2.0 Hi-Speed (Device Class for computers), based on Universal Serial Bus Specifications Revision 2.0; 480Mbps
USB 2.0 Hi-Speed (Mass Storage Class for external storage devices)
Bluetooth
®
Ver. 2.0+EDR (option)
IrDA Ver. 1.3

Safety Approvals

Safety standards UL 60950-1
CAN/CSA-22.2 No.60950-1
EMC FCC part 15 Subpart B class B
CAN/CSA-CEI/IEC CISPR 22 Class B

Paper

Paper Type Specifications
Single sheets Plain bond
paper or special paper distributed by Epson
Envelopes Plain bond
paper
Printable area
Normal Borderless*
Thickness: 0.003 to 0.004 inch (0.08 to 0.11 mm) for plain bond paper
Weight: 17 lb to 24 lb (64 g/m² to 90 g/m²) for plain bond paper
Weight: 20 lb to 24 lb (75 g/m² to 90 g/m²)
A The minimum top margin is 0.12 inch (3.0 mm).
B-L The minimum left margin is 0.12 inch (3.0 mm).
B-R The minimum right margin is 0.12 inch (3.0 mm).
C The minimum bottom margin is 0.12 inch (3.0 mm).
D-L The minimum left margin is 0.20 inch (5.0 mm).
D-R The minimum right margin is 0.20 inch (5.0 mm).
E The minimum bottom margin is 0.79 inch (20.0 mm).
* When you print with the borderless feature, print quality may
decline in the expanded area. Before printing large jobs using the borderless setting, print a single sheet to confirm printout quality.
Note: Always load paper into the sheet feeder with the short edge first. Load envelopes flap edge left with the flap side down.

Memory Cards

Compatible memory cards:
Slot Type of Card
Memory Stick
card*
®
Top slot xD-Picture Card
Bottom slot CompactFlash
xD Picture Card Type M xD-Picture Card Type H MagicGate MagicGate Memory Stick Duo* Memory Stick Memory Stick Duo™* Memory Stick PRO Memory Stick PRO Duo™* MultiMediaCard
SD
Memory Card SDHC Memory Card miniSD miniSDHC card* microSD card* microSDHC card*
Microdrive
Envelopes
4 - Epson Stylus Photo RX580 11/06
* User-supplied adapter required
Page 5
Epson Stylus Photo RX580
Memory card slots:
CF Type II card slot Compatible with CF+ and CompactFlash
Memory Stick/Memory Stick PRO card slot
SD/MMC card slot Compatible with SD Memory Card
xD-Picture card Slot Compatible with xD-Picture card, Card
Voltage requirements 3.3 v
Specification 3.0 cards
Compatible with Memory Stick Standard version 1.42-00 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.02-00 cards
Specifications / PART1. Physical Layer Specification Version 2.0 cards and MultiMediaCard Standard Version 4.1 cards
Specification Version 1.20 Type M and Type H cards
Maximum current is 500mA
Memory card image file requirements:
Media format Compliant with DCF version 1.0 or 2.0
File format JPEG or TIFF, DOS FAT (FAT 12 or 16, one partition)
Image size 80 × 80 pixels to 9200 × 9200 pixels
Number of files Up to 999
taken with a DCF version 1.0 or 2.0 compliant digital camera Supports Exif version 2.21
Don’t load paper above the arrow mark on the left edge
guide. Make sure the paper is under the tabs on the left and right edge guides.
Load the printable side face-up. It’s often brighter or whiter
than the other side.
Always load the short edge first, even when printing in
landscape mode.
Load letterhead or preprinted paper into the RX580 top
edge first.
If you experience paper feeding problems, try loading fewer
sheets.
If you’re using special paper, follow the instructions that
came with it.

Copying Without a Computer

Placing the Original on the Glass

1. Open the document cover and place your original face-down on the glass, in the upper left corner.

Paper Loading Guidelines

You can load up to 120 sheets of plain paper. You can load the following number of sheets of Epson special media:
Paper type
Epson Presentation Paper Matte Epson Photo Quality Ink Jet Paper
Epson Bright White Paper Epson Premium Bright White Paper
Epson Ultra Premium Photo Paper Glossy Epson Ultra Premium Glossy Photo Paper Epson Premium Photo Paper Glossy Epson Premium Glossy Photo Paper Epson Premium Photo Paper Semi-gloss Epson Premium Semigloss Photo Paper Epson Photo Paper Glossy Epson Glossy Photo Paper Epson Premium Presentation Paper Matte Epson Matte Paper Heavyweight Epson Premium Presentation Paper Matte Double-sided Epson Double-sided Matte Paper Epson Ultra Premium Photo Paper Luster Epson Premium Luster Photo Paper
Epson Iron-on Cool Peel Transfer paper Epson Photo Quality Self Adhesive Sheets
Loading capacity
100 sheets
80 sheets
20 sheets
One sheet
2. Close the document cover gently so that your original doesn’t move.
Caution: Never open the document cover beyond where it stops and do not place heavy objects on top of the RX580.
If you need to press the document flat while you copy it, do not press too hard and be careful not to move it.
Note: If you need to copy a thick or large document, you can remove the document cover. Just open it and pull it straight up. When you are done, replace the document cover by inserting the tabs back into the slots.
11/06 Epson Stylus Photo RX580 - 5
Page 6
Epson Stylus Photo RX580

Copying Documents

You can copy documents in color or black and white, using plain paper or a variety of Epson papers for special projects.
1. Make sure the RX580 is turned on.
2. Place your document on the glass as described on page 5. Be sure to close the document cover.
3. Load up to 120 sheets of plain paper or 20 sheets of specialty paper.
4. Press the
5. Press l or r to choose
6. If you want more than one copy, press the to select the number you want.
7. If you want to resize your copy, print on special paper, or adjust other settings, see “Selecting Copy Settings” on the right.
8. Press the x
If you need to cancel copying, press the y
Clear Settings
printed; it will be ejected automatically to the front tray.
Note: The copies may not be exactly the same size as the original.
Copy mode button.
Color or B&W.
Copies + button
Start button to start copying.
Stop/
button. Do not pull out paper that is being
If you want to copy on a different size or type of paper,
or select other special settings, press the x
Settings
button. See “Print Settings for Copying” on
Print
page 7 for more information.
The RX580 remembers your settings, even after you
turn it off.
7. Adjust any settings as necessary, then press
8. Press the x
Note: If you want to restore the color in faded photos, see “Reprinting Photos and Restoring Color” on page 7.
Start button to start copying.
OK.

Selecting Copy Settings

You can select special settings for copying on various sizes and types of paper, reducing or enlarging your original, or other types of copies. The settings you select will be saved, even after you turn off the RX580.
Layout Settings for Copying
1. Press the Copy mode button.
2. Press d to select
3. Press u or d to select one of the following layout settings,
then press
Layout, then press r.
OK.

Copying Photos

You can copy a photograph on 4 × 6, 5 × 7, 8 × 10, or
8.5 × 11-inch paper. You can easily resize your photo to fit on
any size paper you want to use. The easiest way to copy photos (using default settings) is using 4 × 6 Epson Premium Photo Paper Glossy.
See page 2 for a list of special Epson papers for photos and creative projects.
1. Place your photo on the glass as described on page 5. Be sure to close the document cover.
2. Load your photo paper.
3. Press the
4. Press l or r to choose
5. If you want more than one copy, press the to select the number you want.
6. Press d, then press r, select
These settings are automatically selected when you copy
If you want to copy using a special layout, such as white
Copy mode button.
Color or B&W.
Copies + button
Photo, and press OK.
photos: Borderless prints, automatically sized to fit on 4 × 6-inch Premium Photo Paper Glossy.
borders or multiple photos on one sheet, press d, then press r and select your layout. See “Layout Settings for Copying” on the right for more information.
Layout Setting for Copying Result
Border
Copies your original with a standard 3-mm margin.
Borderless
Copies your photo all the way to the edges of the paper (on Epson photo papers only). Your image is slightly expanded and cropped to fill the page.
CD/DVD Copy
Copies onto a CD or DVD. See your printed Basics Guide for more information.
Wallet Copy
Makes wallet-sized copies of your original; 9 copies on letter-sized paper or as many will fit on smaller sheets.
2-up Copy
Copies two letter-size originals onto one sheet. After the first original is scanned, you place the second one on the glass. Then both originals are copied on one sheet of paper.
6 - Epson Stylus Photo RX580 11/06
Page 7
Epson Stylus Photo RX580
Layout Setting for Copying Result
Repeat Copy
Prints a photo at actual size as many times as it will fit on one sheet.
Repeat-4
Prints a photo four times on one sheet.
Print Settings for Copying
You can choose from various sizes and types of Epson paper and other settings to get just the results you want.
1. Press the
2. Press the x
Copy mode button.
Print Settings button.
3. Press u or d to select a menu item, then press the r button.
4. Press u or d to select one of the following print settings,
then press
OK.
Zoom: Select Actual to print your photo at its original
size. You can reduce or enlarge your original by a specific percentage using the select
Auto Fit Page for borderless printing and resizing
Copies + or buttons. Or
the image to fit standard paper sizes.
Paper Type: Select the type of paper you loaded. See
“Selecting the Paper Type Setting When You Print or Copy Without a Computer” on page 8 for a list of Epson papers and the corresponding Paper Types.
Paper Size: Select the paper size you loaded.
Quality: Select Draft, Standard or Best.
Copy Density: Make your copies darker or lighter.
Expansion: When you print borderless photos, your
image is slightly expanded and cropped to fill the sheet of paper. If too much of your photo edges are cut off, select
Mid or Min. If you see a white edge on your
photo, leave it set on
Standard.

Reprinting Photos and Restoring Color

If you have faded photos (up to 5 × 7 inches), you can bring them back to life using the Color Restoration feature.
For photos that are not faded, you can follow the same steps to crop and resize your pictures or even change a color photo to black and white.
1. Place one or two photos on the scanner glass in the direction shown, making sure they are at least 1/4 inch apart and 1/4 inch from the edges of the glass.
1/4 inch
1/4 inch
1/4 inch
2. Load your photo paper.
3. Press the
4. Press l or r to highlight press
5. Press r, use the u or d buttons to set then press need color restoration, choose
6. Press placement of your photos, press
The photo(s) are scanned and restored. You see a preview on the LCD screen.
7. If you want to crop your photo, press the button and adjust the size and position of the yellow box.
Specialty Print button.
Reprint/Restore Photos, then
OK.
Restoration On,
OK. (If you want to reprint photos that don’t
Off).
OK again. When you see a message about the
OK.
Display/Crop
8. If you’re copying two photos, press r to preview the second photo. Repeat step 7 if you want to crop the second photo.
9. Press the x
Print Settings button.
11/06 Epson Stylus Photo RX580 - 7
Page 8
Epson Stylus Photo RX580
10. Press u or d to choose from the settings listed below, then press r. Press
Paper Type: choose Prem. Glossy, Ultra Glossy, Photo Paper, or Matte, depending on the type of
OK when you are done.
paper you’re using.
Paper Size: choose the size of the paper you loaded.
Layout: choose Border or Borderless.
Quality: this setting can’t be changed from Standard
when you are reprinting or restoring photos.
Color Effect: choose Off (to print in color) or B&W (to
print in black and white).
Expansion: When you print borderless photos, your
image is slightly expanded and cropped to fill the sheet of paper. If too much of your photo edges are cut off, select
Mid or Min.
11. Press the x
Note: If you need to cancel printing, press the y Stop/ Clear Settings button.
Start button to print your photo or photos.

Selecting the Paper Type Setting When You Print or Copy Without a Computer

For this paper
Epson Premium Photo Paper Glossy Epson Premium Glossy Photo Paper
Epson Ultra Premium Photo Paper Glossy Epson Ultra Premium Glossy Photo Paper
Epson Photo Paper Glossy Epson Glossy Photo Paper
Plain paper Epson Bright White Paper Epson Premium Bright White Paper Epson Iron-on Cool Peel Transfer Paper
Epson Premium Presentation Paper Matte Epson Matte Paper Heavyweight Epson Premium Presentation Paper Matte Double-sided Epson Double-sided Matte Paper Epson Presentation Paper Matte Epson Photo Quality Ink Jet Paper Epson Photo Quality Self Adhesive Sheets
Select this setting
PremGlossy
UltraGlossy
Photo Paper
Plain Paper
Matte

Printing CDs and DVDs

Your RX580 includes a special tray that lets you print customized text, graphics, and photos directly on any ink jet-printable CD or DVD.
When you use your computer, the Epson Print CD software makes it easy to import your own photos, add text, and modify your designs with a variety of special effects. You can print on both regular 12-cm and 8-cm CDs and DVDs. See your on-screen User’s Guide for more information.
You can also print photos and designs without using a computer. You can either scan a photo (or other printed image) and copy it onto the CD or DVD, or you can use photos from your camera’s memory card. See your printed Basics Guide for more information.
Caution: Use only ink jet-printable CDs and DVDs for printing. Thermal-printable and regular CDs and DVDs should not be used with your RX580; otherwise the ink may smear.

Cleaning the Rollers

Before you print on CDs or DVDs, you should clean the rollers inside the RX580. You can do this by feeding and ejecting several sheets of plain paper.
1. Make sure your RX580 is turned on and several sheets of letter-size plain paper are loaded.
2. Make sure there are no documents on the document table.
3. Press the
Note: If you don’t use your RX580 for several minutes, the LCD screen turns off to save energy. If this happens, you may have to press the Copy button twice to see the screen above.
4. Press the y Stop/Clear Settings button.
5. Press the should indicate five copies.
Copy button. You see the following LCD screen:
Copies + button four times. The LCD screen
8 - Epson Stylus Photo RX580 11/06
6. Press the x button.
Page 9
Epson Stylus Photo RX580

Inserting a CD or DVD

Caution: Make sure the data, music, or video is burned on your CD or DVD before you print. Otherwise, dirt or scratches on the surface may cause errors when you burn the data.
1. Turn your RX580 on.
2. Open the front cover, then set the front tray to the CD/DVD position by pushing the tray lever down.
Caution: Before you move the tray lever, make sure no paper or other objects are on the front tray and the front tray is not extended.
If you’ve just turned the RX580 on, make sure the green light has stopped flashing before you move the tray lever.
Do not touch the front tray when you move the tray lever.
Do not move the tray lever while the RX580 is printing.
P On
Caution: Make sure you always use the small CD/DVD adapter
when you print on 8-cm CDs or DVDs and that the CD or DVD and adapter lie flat on the tray; otherwise the RX580 may be damaged.
CD/DVD adapter
12-cm CD/DVD
8-cm CD/DVD
4. Gently insert the CD/DVD tray along the base of the front tray until the arrow marks on the CD/DVD tray and the front tray match each other.
Caution: Make sure both sides of the CD/DVD tray slide underneath the tabs on the front tray.
Be sure to insert the CD/DVD tray while the power is on. Otherwise, automatic print position adjustment may not take place after inserting the CD/DVD tray.
Do not insert the CD/DVD tray while the RX580 is printing; otherwise, your RX580 may be damaged or the surface of the CD or DVD may become dirty or scratched.
3. Place the CD or DVD on the CD/DVD tray with the white or printable side face-up. Make sure the disc lies flat in the tray.
Note: Use one CD/DVD at a time.
Caution: Before you position the CD or DVD, make sure that no
foreign particles or substances are on the CD/DVD tray, as these may damage the disc’s data side.
To print on a small CD or DVD (8-cm), place the small CD/DVD adapter on the tray first, then place the CD or DVD inside the adapter. Make sure the tabs on the edge of the adapter fit squarely into the molding of the tray.
Make sure the CD/DVD tray slides under the tab (on both sides)
Make sure the arrow marks match
11/06 Epson Stylus Photo RX580 - 9
Page 10
Epson Stylus Photo RX580
After you finish printing on a CD/DVD, remove the CD/DVD tray and set the front tray to the paper position by pushing up the tray lever.

Printing Photos from Your Camera’s Memory Card

The RX580 lets you print color photos directly from your digital camera’s memory card; just insert it into one of the memory card slots on the RX580 and you’re ready to print.
The color and lighting in your images are automatically corrected. You can also crop your photos, manually adjust the brightness and contrast, and correct red eyes—all without using your computer! See your printed Basics Guide for more information.
You can use the cards and image file types shown in “Memory Cards” beginning on page 4.
If your RX580 is connected to a computer running Windows 2000 or XP, never turn off the RX580 or disconnect the USB cable when a memory card is inserted; you may lose photos on the card.
On a Macintosh, always drag the memory card icon on the desktop into the trash to eject the card before you turn off the RX580 or unplug the USB cable. Otherwise, you may lose photos on the card.

Printing Photos

The View and Print option lets you preview and choose individual photos to print.
1. Insert your memory card as described on the left.
2. Press the
3. Press l or r to select
4. Press l or r to choose the photo you want to print.
5. When you see a photo you want to print, press the
Copies + button.
If you want more than one copy, press the again.
6. Repeat steps 4 and 5 for each additional photo you want to print.
7. Press the x
8. Press r to choose
Memory Card mode button.
View and Print, then press OK.
Copies + button
Print Settings button.
Paper Type.

Inserting the Card

1. Make sure the RX580 is turned on.
2. Open the memory card slot cover.
Caution: If your card requires an adapter, make sure you insert it into the adapter before you insert it in the slot. Otherwise, the card may get stuck in the slot. Do not insert more than one card at a time, and do not force the card into the slot.
3. Make sure the memory card access light is off and that no cards are in any of the slots, then insert your card into the correct slot. See page 4 for details.
The memory card access light flashes and then stays on.
4. Close the memory card slot cover.
When you want to remove the card, make sure the memory card access light is not flashing, then pull the card straight out of its slot.
Caution: Do not remove the card or turn off the RX580 while the memory card access light is flashing; you may lose photos on the card.
9. Press u or d to select the setting that matches the type of
paper you loaded, then press
Note: See “Selecting the Paper Type Setting When You Print or Copy Without a Computer” on page 8 for a list of Epson papers and the corresponding Paper Types.
OK.
10. Press d to highlight Paper Size, then press r to display a list of sizes. Press u or d to choose your paper size, then press
OK.
11. Press d to highlight
Layout, then press r to display a list of
layouts. Press u or d to choose your layout option, then press
OK. See your printed Basics Guide for more
information.
12. Press d or u to highlight other settings in the Print Settings list, then press r to display the list of options. See your printed Basics Guide for more information.
13. Press
14. Make sure you have paper loaded, then press the x
OK to confirm your print settings and selections.
Start
button to print your photos.
Note: If you need to cancel printing, press the y Stop/ Clear Settings button.
10 - Epson Stylus Photo RX580 11/06
Page 11
Epson Stylus Photo RX580
To select photos for printing, you can also view multiple photos at once on the LCD screen, print an index sheet, or use your camera’s DPOF function (if supported by your camera). See your printed Basics Guide for more information.
You can also print all of the photos on your memory card at once or print all of the photos taken on specific dates. See your printed Basics Guide for more information.

Printing From Other Devices

You can print photos by directly connecting a PictBridge- or USB DIRECT-PRINT mobile phone, or a data storage device such as a USB flash drive. See your printed Basics Guide for more information.
If your mobile phone, PDA, or other device supports infrared transmission, you can send your photos to the RX580 and print them wirelessly. See your printed Basics Guide for more information.
Using the optional Epson Bluetooth Photo Print Adapter, you can also print wirelessly from a Bluetooth-enabled PDA, mobile phone, or computer. For more information, see the on-screen User’s Guide.
-compatible digital camera or
You see a window like this one:
To see the part numbers for the ink cartridges currently installed in your RX580, click
Macintosh OS X: Open the Applications folder and select
EPSON Printer Utility2. Select SP RX580 Series in the
printer list, click
You see a window like this one:
OK, and select EPSON StatusMonitor.
Information.

Replacing an Ink Cartridge

When you print with low or expended ink cartridges, you see a message on the LCD screen telling you which cartridges are low or expended.
You’ll also see a message on your computer screen telling you which cartridge is low or expended.
When a cartridge is more than six months old, you may need to replace it if printouts don’t look their best. If the quality doesn’t improve after cleaning and aligning the print head, you can replace the cartridge even if it is not expended.

Checking the Ink Supply

To check the ink supply, do one of the following:
Windows: Double-click the icon on your taskbar (in the
lower right corner of your screen).
Click a cartridge image to display information about the cartridge.
Using the buttons on the RX580: Press
r to select
You see a screen showing the status of the ink cartridges:
Ink Cartridge Status, then press OK.
Setup, press l or
11/06 Epson Stylus Photo RX580 - 11
Page 12
Epson Stylus Photo RX580
When you’re done, press l or r to select
OK, then press
OK.

Ink Cartridge Precautions

Warning: Keep ink cartridges out of the reach of children. Do not allow children to drink from or handle the cartridges.
The ink cartridges are designed to contain any excess ink and prevent leakage. Careful handling is recommended, however. Do not touch the supply port of the ink cartridge or its surrounding area.
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. If discomfort or vision problems continue after a thorough flushing, see a doctor immediately.
Caution: Don’t remove the cartridge label, or ink will leak.
Don’t remove the green IC chip from the cartridge. Installing a cartridge without an IC chip can damage the RX580. Avoid touching the green IC chip, as this can damage the ink cartridge.
If you remove an ink cartridge temporarily, protect the ink supply port on the bottom of the cartridge from dirt and dust. Place it in a small box, or, if you have the original packaging, return it to its own box.
Store ink cartridges in the same environment as the RX580. Stand the cartridges upright; the label identifying the color should be on top.
Note: You cannot continue printing or copying with one ink cartridge expended, even if the other cartridges still contain ink. Before printing, replace the expended cartridge.
This RX580 uses ink cartridges equipped with IC chips that monitor the amount of ink used by each cartridge. Cartridges are usable even if they are removed and reinserted. Some ink is consumed each time cartridges are inserted, however, because the RX580 automatically checks their reliability.
If you remove a cartridge that is low (for which you have received an “Ink low” message) and you temporarily install a new cartridge in its place, you cannot reuse the low cartridge.
Ink is consumed during the following operations: print head cleaning, self-cleaning (performed when the RX580 is turned on), and ink charging (when an ink cartridge is installed).
2. Do one of the following:
If an ink cartridge is expended:
Look at the message on the LCD screen to find out which cartridge should be replaced, then press
OK.
If an ink cartridge is not expended:
Press
Setup, press l or r to select Maintenance, then
press
OK. Then press u or d to select Change Ink
Cartridge
, and press OK.
3. Make sure the document cover is closed, then lift up the scanner unit.
4. Open the cartridge cover.
Caution: Never attempt to open the cartridge cover while the print head is moving; wait until the cartridges have moved to the replacement position.
To avoid damaging the RX580, never move the print head by hand.

Removing and Installing Ink Cartridges

Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability.
Caution: Leave the expended cartridge installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. To ensure the best results, use genuine Epson ink cartridges and do not refill them. Other products may cause ink spills or other damage to your RX580 not covered by Epson’s warranty.
1. Make sure the RX580 is turned on, the CD/DVD tray is not inserted, and the front tray is in the paper (lower) position. If it is not, lift the tray lever up to reposition the front tray.
12 - Epson Stylus Photo RX580 11/06
5. Squeeze the tab at the back of the used cartridge and lift it straight out. Dispose of it carefully. Don’t take the cartridge apart or try to refill it.
Page 13
Epson Stylus Photo RX580
Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. If discomfort or vision problems continue after a thorough flushing, see a doctor immediately.
Note: If an ink cartridge is low, you may continue to use it until it is expended.
6. Remove the new cartridge from its package.
Caution: Always install an ink cartridge immediately after removing the old cartridge. If the cartridge is not installed promptly, the print head may dry out and be unable to print.
Do not touch the green IC chip on the side of the cartridge. This can damage the ink cartridge.
Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become unusable.
Do not remove or tear the label on the cartridge; otherwise, ink will leak.
8. Lower the new ink cartridge into the holder. Push down gently until the cartridge clicks into place.
7. Remove the yellow tape from the bottom of the ink cartridge.
Caution: You must remove the yellow tape from the cartridge before you install it; otherwise, print quality may decline or you may not be able to print.
If you have installed an ink cartridge without removing the yellow tape, take the cartridge out of the RX580, remove the yellow tape, and then reinstall it.
9. If you need to replace another ink cartridge, repeat steps 5 through 8 before continuing with step 10.
10. Close the cartridge cover and press it until it clicks into place.
11. Close the scanner unit.
11/06 Epson Stylus Photo RX580 - 13
Page 14
Epson Stylus Photo RX580
12. Press
OK.
The RX580 begins charging the ink delivery system and the message “Charging Ink. Please Wait” appears on the LCD screen.
After about one minute, the message “Ink cartridge replacement is complete” appears on the LCD screen.
Caution: Do not turn off the RX580 during ink charging or you’ll waste ink.
Do not insert the CD/DVD tray until ink charging is complete.
Note: If you had to replace an ink cartridge during copying, the documents or photos on the document table may have moved slightly when you opened and closed the scanner unit. To ensure copy quality, after ink charging is finished, press the Clear Settings button to cancel the job that is copying and start again.
y Stop/

Cleaning the Print Head

If your printouts are unexpectedly light or faint, or you notice light or dark bands across your printout, you may need to clean the print head. This unclogs the nozzles so they can deliver ink properly.
Note: Print head cleaning uses ink, so clean the print head only when print quality declines (for example, if you see lines in your printout or colors are incorrect or missing).
Before you clean the print head, check the print head nozzles to confirm that the print head needs to be cleaned. This saves ink. For more information, see “Checking the Print Head Nozzles” on the right.
If error messages indicating ink expended or ink low appear on the LCD screen, you cannot clean the print head. Replace the appropriate ink cartridge first.
Caution: If you don’t use your RX580 often, it is a good idea to print a few pages at least once a month to maintain good print quality.
Before you check the print head nozzles or clean the print head, make sure the CD/DVD tray is not inserted in the RX580, and make sure the front tray is in the paper (lower) position. If it is not, lift the tray lever up to reposition the front tray.

Checking the Print Head Nozzles

1. Make sure the RX580 is turned on but not printing, and no warnings or errors are displayed on the LCD screen.
2. Make sure letter-size plain paper is loaded in the RX580.
3. Press the
4. Press l or r to select
5. Press u or d to select
6. Press the x
Setup button.
Maintenance, then press OK.
Nozzle Check, then press OK.
Start button.
7. The nozzle check pattern prints:
Print head does not need to be cleaned:
Print head needs to be cleaned:
8. If there are no gaps or lines, the print head does not need to be cleaned. Press
OK to return to the Maintenance menu.
If there are gaps or lines, or the test patterns are faint, follow the steps in “Cleaning the Print Head” below to clean the nozzles.

Cleaning the Print Head

1. Make sure the RX580 is turned on but not printing, and no warnings or errors are displayed on the LCD screen. (If error messages indicating ink expended or ink low appear on the LCD screen, you need to replace a cartridge as described on page 11.)
2. Press the
3. Press l or r to select
4. Press u or d to select
5. Press the x
Cleaning takes several seconds. The message “Print head cleaning in progress. Please wait” appears on the LCD screen.
Setup button.
Maintenance, then press OK.
Head Cleaning, then press OK.
Start button.
14 - Epson Stylus Photo RX580 11/06
Caution: Never turn off your RX580 while the message “Print head cleaning in progress. Please wait” appears on the LCD screen. You may damage it.
Do not insert the CD/DVD tray until cleaning has finished.
Page 15
Epson Stylus Photo RX580
6. When the message “Print head cleaning complete” appears on the LCD screen, make sure paper is loaded in the RX580, then press the x
Start button.
The nozzle check pattern prints.
7. If there are no gaps or lines (as shown below), press
OK to
return to the Maintenance menu.
If there are still gaps or lines, or the test patterns are faint (as shown below), click the x
Start button to clean the print
head again.
If you don’t see any improvement after cleaning four times, turn the RX580 off and wait for at least 6 hours. This allows any dried ink to soften. Then, try cleaning the print head again.
6. Press the x Start button. Your RX580 prints an alignment
sheet like this one:
The alignment sheet contains four sets of squares.
7. Look at the printed squares in set #1 to determine which one is the most even, with no streaks or lines. You may have to use a magnifying glass.
8. Press r, then press u or d to select the number for that square.
9. Press
OK.
10. Press d to select the next set, then repeat steps 7 through 9.

Aligning the Print Head

If your printouts look grainy or blurry, or you see light or dark lines, you may need to align the print head.
Note: You may also see lines in your printouts if your cartridges are low on ink or you need to clean the print head.
Do not press the alignment sheet.
Before you align the print head, make sure the CD/DVD tray is not inserted in the RX580, and make sure the front tray is in the paper (lower) position. If it is not, lift the tray lever up to reposition the front tray.
1. Make sure the RX580 is turned on but not printing, and no warnings or errors are displayed on the LCD screen.
2. Make sure letter-size plain paper is loaded in the RX580.
3. Press
4. Use the l or r button to select
OK.
5. Use the u or d button to select press
y Stop/Clear Settings button while printing an
Setup.
Maintenance, then press
Head Alignment, then
OK.
11. When you’ve finished making your selections for each of the four sets, press
OK.

Transporting the RX580

If you need to ship your RX580, you must prepare it for transportation by packing it in its original box or one of a similar size.
Caution: When storing or transporting the RX580, do not tilt it, stand it up vertically, or turn it upside down. Otherwise, ink may leak from the cartridges.
Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may prevent the RX580 from printing.
1. Remove all paper from the sheet feeder.
2. Turn the RX580 off.
3. Remove any memory cards installed in the memory card slots.
11/06 Epson Stylus Photo RX580 - 15
Page 16
Epson Stylus Photo RX580
4. Lift up the scanner unit and make sure the print head is in the home (far right) position.
5. Close the scanner unit.
6. Unplug the power cord from the outlet, then disconnect the USB cable from your computer.
7. Close the paper support, the front tray, and front cover.

Related Documentation

CPD-22267R1 Epson Stylus Photo RX580 Start Here
CPD-22269 Epson Stylus Photo RX580 Basics Guide
CPD-22268R1 Epson Stylus Photo RX580 CD-ROM
with on-screen User’s Guide
8. Repack the RX580 in the box, using the protective materials that came with it.
Keep the RX580 level as you transport it.
After transporting the RX580, plug it in, turn it on, and test it. If you notice a decline in print quality, clean the print head as described on page 14; if output is grainy or blurry, align the print head as described on page 15.
16 - Epson Stylus Photo RX580 11/06
Loading...